Aluminum Electrolytic Capacitors Radial Lead Type KA-A (Bi-polar) series Features Endurance : 85 1000 h 7 mm height RoHS compliant Specifications Category temp. range 40 to +85 Rated voltage range 4 V to 50 V Capacitance range 2.2 F to 100 F Capacitance tolerance 20 % (120 Hz / +20) Leakage current I 0.05 CV or 10 (A) After 2 minutes (Whichever is greater) Dissipation factortan ) Please see the attached characteristics list After 1000 h application of DC working voltage (500 h for each polarity) at +85 2 , when the capacitors are restored to 20 , the capacitors shall meet the following limits. Endurance Capacitance change Within 20 % of the initial value Dissipation factortan ) 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 h at +85 2 with no voltage applied and then being Shelf life stabilized at +20 , capacitors shall meet the limits specified in endurance. (With voltage treatment) Frequency correction factor for ripple current Freq.Hz) 50, 60 120 1 k 10 k to Cap.F 2.2 to 100 0.70 1.00 1.30 1.70 Dimensions Sleeve L1.0 14min. 3min. D0.5 Unitmm D 4.0 5.0 6.3 d 0.45 0.45 0.45 F 1.5 2.0 2.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 28-Feb-20 d0.05 F0.5Aluminum Electrolytic Capacitors (Radial Lead Type) KA-A (Bi-polar) series Characteristics list Endurance : 85 1000 h (500 h for each polarity) Case size Lead length Min. Packaging Specification Q ty (PCS) () (mm) Rated Capacitance voltage Lead space Part No. (20 %) Ripple Lead Strai- (V) (F) *2 *1 D L dia. Taping Taping ght Taping tan current Straight (d) B i leads (mA rms) 4 100 6.3 7.0 61 0.35 0.45 2.5 5.0 2.5 ECEA0GKN101( ) 200 2000 22 5.0 7.0 29 0.24 0.45 2.0 5.0 2.5 ECEA0JKN220( ) 200 2000 6.3 33 5.0 7.0 38 0.24 0.45 2.0 5.0 2.5 ECEA0JKN330( ) 200 2000 47 6.3 7.0 46 0.24 0.45 2.5 5.0 2.5 ECEA0JKN470( ) 200 2000 10 4.0 7.0 25 0.20 0.45 1.5 5.0 2.5 ECEA1AKN100( ) 200 2000 22 5.0 7.0 35 0.20 0.45 2.0 5.0 2.5 ECEA1AKN220( ) 200 2000 10 33 6.3 7.0 43 0.20 0.45 2.5 5.0 2.5 ECEA1AKN330( ) 200 2000 47 6.3 7.0 65 0.20 0.45 2.5 5.0 2.5 ECEA1AKN470( ) 200 2000 4.7 4.0 7.0 20 0.16 0.45 1.5 5.0 2.5 ECEA1CKN4R7( ) 200 2000 10 5.0 7.0 25 0.16 0.45 2.0 5.0 2.5 ECEA1CKN100( ) 200 2000 16 22 6.3 7.0 39 0.16 0.45 2.5 5.0 2.5 ECEA1CKN220( ) 200 2000 33 6.3 7.0 60 0.16 0.45 2.5 5.0 2.5 ECEA1CKN330( ) 200 2000 3.3 4.0 7.0 16 0.16 0.45 1.5 5.0 2.5 ECEA1EKN3R3( ) 200 2000 4.7 5.0 7.0 21 0.16 0.45 2.0 5.0 2.5 ECEA1EKN4R7( ) 200 2000 25 10 6.3 7.0 28 0.16 0.45 2.5 5.0 2.5 ECEA1EKN100( ) 200 2000 22 6.3 7.0 55 0.16 0.45 2.5 5.0 2.5 ECEA1EKN220( ) 200 2000 2.2 4.0 7.0 12 0.14 0.45 1.5 5.0 2.5 ECEA1VKN2R2( ) 200 2000 3.3 5.0 7.0 16 0.14 0.45 2.0 5.0 2.5 ECEA1VKN3R3( ) 200 2000 35 4.7 5.0 7.0 22 0.14 0.45 2.0 5.0 2.5 ECEA1VKN4R7( ) 200 2000 10 6.3 7.0 30 0.14 0.45 2.5 5.0 2.5 ECEA1VKN100( ) 200 2000 2.2 5.0 7.0 16 0.12 0.45 2.0 5.0 2.5 ECEA1HKN2R2( ) 200 2000 50 3.3 5.0 7.0 16 0.12 0.45 2.0 5.0 2.5 ECEA1HKN3R3( ) 200 2000 4.7 6.3 7.0 23 0.12 0.45 2.5 5.0 2.5 ECEA1HKN4R7( ) 200 2000 *1: Ripple current (120 Hz / +85 ) *2: tan (120 Hz/ +20 ) When requesting taped product, please put the letter or between the( . Lead wire pitch B=5 mm, i=2.5 mm. Please refer to the page of Taping dimensions. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 28-Feb-20