Aluminum Electrolytic Capacitors/ GA Radial Lead Type Series: Type: GA A Features Endurance : 105 C 1000 h RoHS directive compliant Specifi cations Category Temp. Range 55 C to +105 C Rated W.V. Range 10 V.DC to 50 V.DC Nominal Cap. Range 1.5 F to 220 F Capacitance Tolerance 20 % (120 Hz/+20 C) DC Leakage Curre nt I < 0.01 CV or 3 (A) After 2 minutes (Whichever is greater) tan d Please see the attached standard products list After following life test with DC voltage and +105 C2 C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), for 1000 hours, when the capacitors are restored to 20 C, the capacitors shall meet the limits speci ed below. Endurance Capacitance change 20 % of initial measured value tan d < 200 % of initial speci ed value DC leakage current < initial speci ed value After storage for 1000 hours at +105 C2 C with no voltage applied and then being stabilized Shelf Life at +20 C, capacitors shall meet the limits speci ed in Endurance. (With voltage treatment) Frequency correction factor for ripple current Frequency (Hz) W.V.(V.DC) Cap (F) 60 120 1 k 10 k 100 k to 10 to 50 1.5 to 220 0.85 1.00 1.30 1.40 1.55 Di men sions in mm(not to scale) (Unit : mm) Sleeve + L1.0 14 min. 3 min. 0D0.5 Body Dia. 0D4 5 6.3 8 Lead Dia. 0d 0.45 0.45 0.45 0.45 Lead space F 1.5 2.0 2.5 2.5 Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 May. 2014 EEE-107 fd0.05 F0.5Aluminum Electrolytic Capacitors/ GA Standard Prod ucts Endurance : 105 C 1000 h Case size Speci cation Lead Length Min. Packaging Q ty Ripple tan d Endur- Lead Lead Space Cap. W.V. Current ance Dia. Straight (20 %) Dia. Length Part No. Taping Taping Taping (120 Hz) (120 Hz) Leads Straight B H (+105 C) (+20 C) (V) (F) (mm) (mm) (mA r.m.s.) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs) 22 4 7 30 0.22 1000 0.45 1.5 5.0 2.5 EEAGA1A220( ) 200 2000 33 5 7 50 0.22 1000 0.45 2.0 5.0 2.5 EEAGA1A330( ) 200 2000 47 6.3 7 65 0.22 1000 0.45 2.5 5.0 2.5 EEAGA1A470( ) 200 2000 10 68 6.3 7 75 0.22 1000 0.45 2.5 5.0 2.5 EEAGA1A680( ) 200 2000 100 6.3 7 110 0.22 1000 0.45 2.5 5.0 2.5 EEAGA1A101( ) 200 2000 220 8 7 160 0.22 1000 0.45 2.5 5.0 2.5 EEAGA1A221( ) 200 1000 10 4 7 30 0.18 1000 0.45 1.5 5.0 2.5 EEAGA1C100( ) 200 2000 15 4 7 33 0.18 1000 0.45 1.5 5.0 2.5 EEAGA1C150( ) 200 2000 22 5 7 50 0.18 1000 0.45 2.0 5.0 2.5 EEAGA1C220( ) 200 2000 16 33 6.3 7 65 0.18 1000 0.45 2.5 5.0 2.5 EEAGA1C330( ) 200 2000 47 6.3 7 77 0.18 1000 0.45 2.5 5.0 2.5 EEAGA1C470( ) 200 2000 100 8 7 120 0.18 1000 0.45 2.5 5.0 2.5 EEAGA1C101( ) 200 1000 10 4 7 33 0.16 1000 0.45 1.5 5.0 2.5 EEAGA1E100( ) 200 2000 15 5 7 45 0.16 1000 0.45 2.0 5.0 2.5 EEAGA1E150( ) 200 2000 25 22 5 7 50 0.16 1000 0.45 2.0 5.0 2.5 EEAGA1E220( ) 200 2000 33 6.3 7 75 0.16 1000 0.45 2.5 5.0 2.5 EEAGA1E330( ) 200 2000 68 8 7 100 0.16 1000 0.45 2.5 5.0 2.5 EEAGA1E680( ) 200 1000 6.8 4 7 33 0.13 1000 0.45 1.5 5.0 2.5 EEAGA1V6R8( ) 200 2000 10 5 7 35 0.13 1000 0.45 2.0 5.0 2.5 EEAGA1V100( ) 200 2000 35 15 6.3 7 50 0.13 1000 0.45 2.5 5.0 2.5 EEAGA1V150( ) 200 2000 22 6.3 7 70 0.13 1000 0.45 2.5 5.0 2.5 EEAGA1V220( ) 200 2000 47 8 7 96 0.13 1000 0.45 2.5 5.0 2.5 EEAGA1V470( ) 200 1000 0.1 4 7 1.1 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1HR10( ) 200 2000 0.15 4 7 1.7 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1HR15( ) 200 2000 0.22 4 7 2.3 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1HR22( ) 200 2000 0.33 4 7 3.5 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1HR33( ) 200 2000 0.47 4 7 5 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1HR47( ) 200 2000 0.68 4 7 7 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1HR68( ) 200 2000 1 4 7 10 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1H1R0( ) 200 2000 1.5 4 7 16 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1H1R5( ) 200 2000 50 2.2 4 7 18 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1H2R2( ) 200 2000 3.3 4 7 22 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1H3R3( ) 200 2000 4.7 4 7 26 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1H4R7( ) 200 2000 6.8 5 7 35 0.10 1000 0.45 2.0 5.0 2.5 EEAGA1H6R8( ) 200 2000 10 6.3 7 39 0.10 1000 0.45 2.5 5.0 2.5 EEAGA1H100( ) 200 2000 15 6.3 7 55 0.10 1000 0.45 2.5 5.0 2.5 EEAGA1H150( ) 200 2000 22 8 7 70 0.10 1000 0.45 2.5 5.0 2.5 EEAGA1H220( ) 200 1000 33 8 7 91 0.10 1000 0.45 2.5 5.0 2.5 EEAGA1H330( ) 200 1000 When requesting taped product, please put the letter or be tween the( . Lead wire pitch B=5 mm, H=2.5 mm. Suf xB for 087, 5mm pitch products Please refer to the page of Taping Dimensions. Please kindly accept last shipment : 31/Mar/2015 Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 May. 2014 EEE-108