EEU-ED2G220 Panasonic

Aluminum Electrolytic Capacitors/ ED Radial Lead Type Propose EE series for New design Series: Type: ED A Features High ripple current (at high frequency) Endurance : 105 C 8000 h to 10000 h Including low prole pr oducts (20 mm height) RoHS directive compliant Speci cations Category Temp. Range 25 C to +105 C Rated W.V. Range 160 V .DC to 450 V .DC Nominal Cap. Range10 F to 330 F Capacitance Tolerance 20 % (120 Hz/+20 C) DC Leakage Curre nt I < 0.06 CV +10 (A) After 2 minutes application of rated working voltage at +20 C tan Please see the attached standard products list After following life test with DC voltage and +105 C2 C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage),when the capacitors are restored to 20 C, the capacitors shall meet the limits speci ed below. Duration : 10=8000 hours, Endurance 12.5 to 18=10000 hours Capacitance change 20 % of initial measured value tan < 200 % of initial specied v alue DC leakage current < initial specied v alue After storage for 1000 hours at +105 C2 C with no voltage applied and then being stabilized Shelf Life at +20 C, capacitors shall meet the limits specied in Endur ance. (With voltage treatment) Ripple current Frequency Coef cient Frequency (Hz) 50 < f < 120 120 < f < 300 300 < f < 1 k 1 k < f < 10 k 10 k < f < 30 k 30 k < f <100 k Cap.(F) Cap. < 100 F 0.30 0.40 0.55 0.70 0.90 1.00 100 F < Cap. 0.35 0.45 0.60 0.75 0.90 1.00 Di men sions in mm (not to scale) mm Sleeve d0.05 Pressure + relief L2.0 14 min. 3 min. D0.5 (mm) Body Dia. D10 12.5 16 18 Lead Dia. d0.6 0.6 0.8 0.8 Lead space F 5.0 5.0 7.5 7.5 Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Oct. 2010 EE199 sn F0.5Aluminum Electrolytic Capacitors/ ED Standard Prod ucts Case size Specica tion Lead Length Min. Packaging Q ty Ripple tan Endur- Lead Lead Space Cap. W.V. Current ance Dia. Straight (20 %) Dia. Length Part No. Taping Taping (100 kHz) (120 Hz) Leads Straight B (+105 C) (+20 C) (V) (F) (mm) (mm) (mA r.m.s.) (hours) (mm) (mm) (mm) (pcs.) (pcs.) 22 10 20 500 0.15 8000 0.6 5.0 5.0 EEUED2C220( ) 200 500 33 10 20 580 0.15 8000 0.6 5.0 5.0 EEUED2C330( ) 200 500 47 10 20 750 0.15 8000 0.6 5.0 5.0 EEUED2C470( ) 200 500 68 12.5 20 9500.1510000 0.6 5.0 5.0 EEUED2C680( ) 200 500 82 12.5 25 1060 0.15 10000 0.6 5.0 5.0 EEUED2C820( ) 200 500 12.5 25 1170 0.15 10000 0.6 5.0 5.0 EEUED2C101( ) 200 500 160 100 16 20 1280 0.15 10000 0.8 7.5 7.5 EEUED2C101S( ) 100 250 16 25 1400 0.15 10000 0.8 7.5 7.5 EEUED2C151( ) 100 250 150 18 20 1400 0.15 10000 0.8 7.5 7.5 EEUED2C151S( ) 100 250 16 31.5 1700 0.15 10000 0.8 7.5 EEUED2C221 100 220 18 25 1500 0.15 10000 0.8 7.5 7.5 EEUED2C221S( ) 100 250 3301831.52000 0.15 10000 0.8 7.5 EEUED2C331 50 22 10 20 600 0.15 8000 0.6 5.0 5.0 EEUED2D220( ) 200 500 33 10 20 650 0.15 8000 0.6 5.0 5.0 EEUED2D330( ) 200 500 47 12.5 20 7900.1510000 0.6 5.0 5.0 EEUED2D470( ) 200 500 12.5 25 9500.1510000 0.6 5.0 5.0 EEUED2D680( ) 200 500 68 16 20 1000 0.15 10000 0.8 7.5 7.5 EEUED2D680S( ) 100 250 200 82 16 20 1100 0.15 10000 0.8 7.5 7.5 EEUED2D820S( ) 100 250 16 25 1300 0.15 10000 0.8 7.5 7.5 EEUED2D101( ) 100 250 100 18 20 1280 0.15 10000 0.8 7.5 7.5 EEUED2D101S( ) 100 250 150162514000.1510000 0.8 7.5 7.5 EEUED2D151( ) 100 250 2201831.52000 0.15 10000 0.8 7.5 EEUED2D221 50 330184024000.1510000 0.8 7.5 EEUED2D331 50 22 10 20 560 0.15 8000 0.6 5.0 5.0 EEUED2E220( ) 200 500 33 12.5 20 7100.1510000 0.6 5.0 5.0 EEUED2E330( ) 200 500 12.5 25 9200.1510000 0.6 5.0 5.0 EEUED2E470( ) 200 500 47 16 20 9900.1510000 0.8 7.5 7.5 EEUED2E470S( ) 100 250 68 16 20 1000 0.15 10000 0.8 7.5 7.5 EEUED2E680S( ) 100 250 250 16 25 1200 0.15 10000 0.8 7.5 7.5 EEUED2E820( ) 100 250 82 18 20 1200 0.15 10000 0.8 7.5 7.5 EEUED2E820S( ) 100 250 16 31.5 1500 0.15 10000 0.8 7.5 EEUED2E101 100 100 18 25 1500 0.15 10000 0.8 7.5 7.5 EEUED2E101S( ) 100 250 1501831.518000.1510000 0.8 7.5 EEUED2E151 50 220184021000.1510000 0.8 7.5 EEUED2E221 50 10 10 20 350 0.20 8000 0.6 5.0 5.0 EEUED2V100( ) 200 500 22 12.5 20 4800.2010000 0.6 5.0 5.0 EEUED2V220( ) 200 500 33 16 20 6400.2010000 0.8 7.5 7.5 EEUED2V330S( ) 100 250 16 25 8000.2010000 0.8 7.5 7.5 EEUED2V470( ) 100 250 47 350 18 20 8000.2010000 0.8 7.5 7.5 EEUED2V470S( ) 100 250 16 31.5 1100 0.20 10000 0.8 7.5 EEUED2V680 100 68 18 25 1000 0.20 10000 0.8 7.5 7.5 EEUED2V680S( ) 100 250 82 18 25 1100 0.20 10000 0.8 7.5 7.5 EEUED2V820S( ) 100 250 1001831.512000.2010000 0.8 7.5 EEUED2V101 50 Endurance : 105 C 10=8000 h, 12.5 to 18=10000 h When requesting taped product, please put the letter be tween the( . Lead wire pitch B=5 mm, 7.5 mm. The taping dimensions are explained on p.178 of our Catalog. Please use it as a reference guide. Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Oct. 2008 EE200 sn