EEU-FK1A682 Panasonic

Aluminum Electrolytic Capacitors This Series is no longer available for purchase in the country of Japan. Radial Lead Type FK-A series Features Endurance : 105 3000 h to 5000 h Low impedance (10 % to 30 % less than FC Series) Miniaturization (30 % to 40 % less than FC Series) AEC-Q200 compliant RoHS compliant Specifications Category temp. range 55 to +105 Rated voltage range 6.3 V to 35 V Capacitance range 180 F to 12000 F Capacitance tolerance 20 % (120 Hz / +20) Leakage current I 0.01 CV (A) After 2 minutes Rated voltageV 6.3 10 16 25 35 (120 Hz /+20) Dissipation factortan ) Dissipation factortan ) 0.22 0.19 0.16 0.14 0.12 For capacitance value 1000 F , add 0.02 per every 1000 F. After following life test with DC voltage and +105 2 ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage)when the capacitors are restored to 20 , the capacitors shall meet the limits specified bellow. Duration Endurance 8 : 3000 h, 10 : 4000 h, 12.5 to 18 : 5000 h Capacitance change Within 20 % of the initial value Dissipation factortan ) 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 h at +105 2 with no voltage applied and then being Shelf life stabilized at +20 C, capacitors shall meet the limits specified in endurance. (With voltage treatment) Frequency correction factor for ripple current Freq.Hz) 60 120 1 k 10 k 100 k Cap.F 180 to 330 0.60 0.70 0.85 0.95 1.00 390 to 1000 0.65 0.75 0.90 0.98 1.00 1200 to 12000 0.75 0.80 0.95 1.00 1.00 Dimensions 8 10 Sleeve Pressure relief 14min. 3min. L* D0.5 D0.5 * L 16L1.5 L 20L2.0 Unitmm D 8.0 10.0 12.5 16.0 18.0 L 12.5 to 25 30 to 40 d 0.6 0.6 0.6 0.8 0.8 0.8 F 3.5 5.0 5.0 5.0 7.5 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 20-Dec-19 d0.05 F0.5Aluminum Electrolytic Capacitors (Radial Lead Type) FK-A series Case size/ Impedance/ Ripple current Impedance Ripple current Casecsize (mm) () (100 kHz) (mA rms) (100 kHz) (DL) +20 -10 +105 8 11.5 0.090 0.180 630 8 15 0.062 0.124 860 8 20 0.044 0.088 1220 10 12.5 0.063 0.126 900 10 16 0.049 0.098 1240 10 20 0.035 0.070 1490 10 25 0.033 0.066 1680 10 30 0.025 0.050 2140 12.5 15 0.048 0.096 1400 12.5 20 0.029 0.058 1890 12.5 25 0.022 0.044 2280 12.5 30 0.018 0.036 2720 12.5 35 0.016 0.032 2940 12.5 40 0.014 0.028 3010 16 15 0.038 0.076 1800 16 20 0.026 0.052 2330 16 25 0.019 0.038 2760 18 15 0.036 0.072 2060 18 20 0.025 0.050 2640 18 25 0.018 0.036 2850 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 20-Dec-19