EEU-TA1C472 Panasonic

Aluminum Electrolytic Capacitors This Series is no longer available for purchase in the country of Japan. Radial Lead Type TA-A series Features Endurance : 125 2000 h Heat cycle: 1000 cycle 40 to +125 AEC-Q200 compliant RoHS compliant Specifications Category temp. range 40 to +125 Rated voltage range 10 V to 63 V Capacitance range 2.2 F to 4700 F Capacitance tolerance 20 % (120 Hz / +20) Leakage current I 0.01 CV or 3 (A) After 2 minutes (Whichever is greater) Rated voltageV 10 16 25 35 50 63 (120 Hz /+20) Dissipation factortan ) Dissipation factortan ) 0.20 0.16 0.14 0.12 0.10 0.09 For capacitance value 1000 F , add 0.02 per every 1000 F. After following life test with DC voltage and +125 2 ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) for 2000 h, when the capacitors are restored to 20 , the capacitors shall meet the limits specified bellow. Endurance Capacitance change Within 30 % of the initial value Dissipation factortan ) 300 % of the initial limit DC leakage current Within the initial limit After storage for 1000 h at +125 2 with no voltage applied and then being Shelf life stabilized at +20 , capacitors shall meet the limits specified in endurance. (With voltage treatment) Frequency correction factor for ripple current Freq.Hz) 60 120 1 k 10 k 100 k Cap.F 2.2 to 330 0.55 0.65 0.85 0.90 1.00 470 to 1000 0.70 0.75 0.90 0.95 1.00 2200 to 4700 0.75 0.80 0.90 0.95 1.00 Dimensions Sleeve 8 10 Pressure relief 14min. 3min. L* D0.5 D0.5 * L 16L1.016x15, 18x15 : L1.5 L 20L2.0 Unitmm D 8.0 10.0 12.5 16.0 18.0 d 0.6 0.6 0.6 0.8 0.8 F 3.5 5.0 5.0 7.5 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 20-Dec-19 d0.05 F0.5Aluminum Electrolytic Capacitors (Radial Lead Type) TA-A series Characteristics list Endurance : 125 2000 h Case size Lead length Min. Packaging Specification Q ty (PCS) () (mm) Rated Capacitance voltage Lead space Part No. (20 %) Ripple Impe- Lead Strai- (V) (F) *1 *2 D L dia. Taping ght Taping current dance Straight (d) B leads (mA rms) () 330 8.0 11.5 500 0.130 0.6 3.5 EEUTA1A331( ) 200 1000 5.0 470 10.0 12.5 680 0.100 0.6 5.0 EEUTA1A471( ) 200 500 5.0 10.0 20.0 1100 0.057 0.6 5.0 EEUTA1A102( ) 200 500 5.0 1000 12.5 15.0 1085 0.070 0.6 5.0 EEUTA1A102S( ) 200 500 5.0 12.5 25.0 1750 0.033 0.6 5.0 EEUTA1A222L( ) 200 500 5.0 10 2200 16.0 20.0 1985 0.032 0.8 7.5 EEUTA1A222( ) 100 250 7.5 18.0 15.0 1800 0.042 0.8 7.5 EEUTA1A222S( ) 100 250 7.5 16.0 25.0 2300 0.024 0.8 7.5 7.5 EEUTA1A332( ) 100 250 3300 18.0 20.0 2250 0.031 0.8 7.5 EEUTA1A332S( ) 100 250 7.5 16.0 31.5 2710 0.020 0.8 7.5 EEUTA1A472 100 4700 18.0 25.0 2470 0.022 0.8 7.5 EEUTA1A472S( ) 100 250 7.5 220 8.0 11.5 500 0.130 0.6 3.5 5.0 EEUTA1C221( ) 200 1000 330 10.0 12.5 680 0.100 0.6 5.0 EEUTA1C331( ) 200 500 5.0 470 10.0 16.0 945 0.075 0.6 5.0 5.0 EEUTA1C471( ) 200 500 12.5 20.0 1490 0.042 0.6 5.0 EEUTA1C102( ) 200 500 5.0 1000 16.0 15.0 1520 0.047 0.8 7.5 100 250 7.5 EEUTA1C102S( ) 16 16.0 25.0 2300 0.024 0.8 7.5 EEUTA1C222( ) 100 250 7.5 2200 18.0 20.0 2250 0.031 0.8 7.5 100 250 7.5 EEUTA1C222S( ) 16.0 31.5 2710 0.020 0.8 7.5 EEUTA1C332 100 3300 18.0 25.0 2470 0.022 0.8 7.5 100 250 7.5 EEUTA1C332S( ) 4700 18.0 31.5 3270 0.018 0.8 7.5 EEUTA1C472 50 100 8.0 11.5 500 0.130 0.6 3.5 EEUTA1E101( ) 200 1000 5.0 220 10.0 12.5 680 0.100 0.6 5.0 EEUTA1E221( ) 200 500 5.0 330 10.0 16.0 945 0.075 0.6 5.0 EEUTA1E331( ) 200 500 5.0 10.0 20.0 1100 0.057 0.6 5.0 EEUTA1E471( ) 200 500 5.0 470 12.5 15.0 1085 0.070 0.6 5.0 EEUTA1E471S( ) 200 500 5.0 25 12.5 25.0 1750 0.033 0.6 5.0 EEUTA1E102L( ) 200 500 5.0 1000 16.0 20.0 1985 0.032 0.8 7.5 EEUTA1E102( ) 100 250 7.5 18.0 15.0 1800 0.042 0.8 7.5 EEUTA1E102S( ) 100 250 7.5 16.0 31.5 2710 0.020 0.8 7.5 EEUTA1E222 100 2200 18.0 25.0 2470 0.022 0.8 7.5 EEUTA1E222S( ) 100 250 7.5 3300 18.0 35.5 3310 0.017 0.8 7.5 EEUTA1E332 50 100 10.0 12.5 555 0.180 0.6 5.0 5.0 EEUTA1V101( ) 200 500 220 10.0 16.0 765 0.130 0.6 5.0 EEUTA1V221( ) 200 500 5.0 330 10.0 20.0 930 0.100 0.6 5.0 5.0 EEUTA1V331( ) 200 500 12.5 20.0 1330 0.070 0.6 5.0 EEUTA1V471( ) 200 500 5.0 35 470 16.0 15.0 1450 0.088 0.8 7.5 7.5 EEUTA1V471S( ) 100 250 16.0 25.0 2010 0.037 0.8 7.5 EEUTA1V102( ) 100 250 7.5 1000 18.0 20.0 2180 0.046 0.8 7.5 7.5 EEUTA1V102S( ) 100 250 2200 18.0 35.5 2790 0.025 0.8 7.5 EEUTA1V222 50 *1: Ripple current (100 kHz / +125 ) *2: Impedance (100 kHz/ +20 ) When requesting taped product, please put the letter be tween the( . Lead wire pitch B=5 mm, 7.5 mm. Please refer to the page of Taping dimensions. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 20-Dec-19