Aluminum Electrolytic Capacitors/TA Surface Mount Type Country of Origin Series: TA Type : V Japan n Features Endurance:125C 1000 h For use near car engines. Good for electronically controlled units (ECU, ABS etc). Vibration-proof product is available upon request.(8 )< = RoHS directive not compliant. TG series is recommended for RoHS compliant. n Specifications Category temp. range -40 to +125C Rated W.V. Range 10 to 50 V .DC Nominal Cap. Range 10 to 330 F Capacitance Tolerance 20 % (120Hz/+20C) < DC Leakage Current I = 0.01 CV or 3( A) after 2 minutes (Whichever is greater) tan Please see the attached standard products list W.V. (V) 1 0 16 25 35 50 Characteristics (Impedance ratio at 120Hz) -25 / +20 C 8 5 4 3 3 at Low Temperature -40 / +20 C 14 12 1 0 8 8 After applying rated working voltage for 1000 hours at +1252C and then being stabilized at +20C, capacitors shall meet the following limits. Endurance Capacitance change 30 % of initial measured value < tan 300 % of initial specified value = < DC leakage current initial specified value = After storage for 500 hours at +1252C with no voltage applied and then being stabilized at +20C, capacitors shall meet the following limits. (With voltage treatment) 20% of initial measured value Shelf Life Capacitance change < 200 % of initial specified value tan = < DC leakage current initial specified value = After reflow soldering and then being stabilized at +20C, capacitor shall meet the following limits. Resistance to 10 % of initial measured value Capacitance change Soldering Heat < initial specified value tan = < initial specified value DC leakage current = n Marking n Dimensions in mm (not to scale) Example: 16V 100 F (Polarized) ( ) reference size A0.2 0.3 max W.V. code Capacitance 100 (F) Negative polarity marking C TA Series identification w L 0.3 (mm) Lot number Size D L A,B H I W P K code W.V. code E 8.0 6.2 8.3 9.5MAX 3.4 0.650.1 2.2 0.35 -0.20 to +0.15 V 10 16 25 35 5 0 0.2 F 8.0 10.2 8.3 10.0MAX 3.4 0.900.2 3.1 0.70 Code A C E V H G 10.0 10.2 10.3 12.0 MAX 3.5 0.900.2 4.6 0.70 0.2 n Case size W.V.(V) 10 (1A) 16 (1C) 25 (1E) 35 (1V) 50 (1H) Cap. (F) 10 E 22 E F 33 E 47 E F G 100 F E F G 220 F G 330 G Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Apr. 2005 EE48 D0.5 H B0.2 K (I) (P) (I)Reflow Aluminum Electrolytic Capacitors/TA n Standard Products Case size Specification Min. Part No. W.V. Cap. Packaging Ripple tan (RoHS: Size Dia. Length current Q ty (20%) (120Hz) not compliant) Code (100kHz) Taping (+20C) (+125C) (V) (F) (pcs) (mm) (mm) (m A ) 100 8 6.2 E EEVTA1A101P (2) 62 0.32 1000 220 8 10.2 F EEVTA1A221P (2) 93 0.32 10 500 330 10 10.2 EEVTA1A331P (2) G 118 0.32 500 100 10.2 EEVTA1C101P (2) 8 F 89 0.24 500 16 220 10.2 EEVTA1C221P (2) 10 G 113 0.24 500 47 8 6.2 E 56 0.21 EEVTA1E470P (2) 1000 25 100 8 10.2 F 84 0.21 EEVTA1E101P (2) 500 33 8 6.2 E 53 0.18 EEVTA1V330P (2) 1000 47 8 10.2 F 79 0.18 EEVTA1V470P (2) 35 500 100 10 10.2 G 101 0.18 EEVTA1V101P (2) 500 10 8 6.2 E EEVTA1H100P 25 0.18 (2) 1000 22 8 6.2 E EEVTA1H220P 50 0.18 (2) 1000 50 33 8 10.2 EEVTA1H330P F 74 0.18 (2) 500 47 10.2 EEVTA1H470P 10 G 94 0.18 (2) 500 The taping dimensions are explained on p.187 of our Catalog. Please use it as a reference guide. Endurance : 125C 1000h Reflow profile(Fig-1 to Fig-5) listed on the last page. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Apr. 2005 EE49