New Product Introduction
Panasonic
New PAN1026 Series
RoHS
COMPLIANT
Place and Play Bluetooth Module
Dual Mode, Place and Play Bluetooth Module
Introducing Panasonics Bluetooth dual mode, place and play RF module, the PAN1026 featuring an embedded ARM
processor, Bluetooth 4.0, serial port profile (SPP), command set API and integrated antenna. This cost-engineered solution
is based on a single chip solution that integrates an ARM processor with a Bluetooth controller. Bluetooth 4.0 combines the
data rate of Bluetooth Classic (3Mb/s) and ultra-fast connection time of Bluetooth Low Energy (3mS). Bluetooth Low Energy
is designed to create low data rate networks using a minimum amount of power. The embedded serial port profile (SPP) frees
application resources while the command set API creates a simple but flexible firmware interface. An onboard antenna does
away with 2.4GHz RF circuit complexity.
Created with the design engineer in mind, product design cycles are greatly reduced using Panasonics free of charge
1
reference design and design review services . PCB layouts are simplified using available Gerber files and minimized with
Panasonics tiny footprint technology. The module is just 15.6mm x 8.7mm x 1.9mm and fully shielded to improve immunity.
All Panasonic Bluetooth RF modules carry FCC, IC, CE and Bluetooth certifications.
2
The PAN1026 recognizes Apples authentication coprocessor and supports Bluetooth communication with Apples iPhone
3
and iPad. Connectivity also includes Android, smart phones and all Bluetooth enabled devices .
Prototyping and testing are accelerated by utilizing the EVAL_PAN1026 development
kit and EasyDualMode software development environment. The EVAL_PAN1026
contains two PAN1026ETU development modules on Panasonics ETU platform
ETU for Easy to Use. EasyDualMode allows both BLE and Bluetooth Classic
application development in a single environment. EasyDualMode software is
PAN1026ETU Development Module
available free of charge on Panasonics RF module website.
1. Services are reserved for qualified customers. Contact one of Panasonic manufacturers sales representatives for more information.
2. Apple authentication coprocessor and MFI certification are required for communicating with Apple Idevices.
3. Connectivity requires that devices support Bluetooth Serial Port Profile
*Apple iPad and iPhone are trademarks of Apple Inc
Features Applications
Bluetooth Version 4.0 iOS and Android Devices
Industrial Temperature Range, -40 to +85C Wireless Sensors
High Sensitivity: -87dbm Cable Replacement
Output Power: 4dbm Instrumentation
Single V Supply: 1.7 to 3.6 V Medical
CC
WiFi Coexistence Automotive
High-Speed Interfaces: USB 2.0 UART up to 4.3 Mbps
Integrated ARM 32-Bit Processor
Copyright 2013 Panasonic Corporation of North America.
Website: www.panasonic.com/industrial
All Rights Reserved. Specifications are subject to change without notice.
industrial@us.panasonic.com
PAN1026 Series NPI, FY13-078-XXX
1-800-344-2112Block Diagram (PAN1026)
EEPROM
V
SUPPLY
Audio PCM/I2S/USB
Toshiba
TC35661 Filter
UART
1-Chip LSI
Slow Clock 32.768 kHz
Crystal
26 MHz
Technical Characteristics
Parameter Value Condition
Receiver Sensitivity -87 dBm typ. Ideal Signal
Output Power +4 dBm typ. @ 50 Ohm Antenna Pin
Power Supply 1.7 to 3.6 V Single Voltage Operation
Transmit 46 mA ACL, DH1
Receive 46 mA ACL, DH1
Operating Temperature -40 to +85C
Ordering Information
Part Number Description
ENW-89837A3KF PAN1026 Bluetooth Module, SPP, Integrated Antenna
EVAL_PAN1026 PAN1026 Evaluation Kit
Additional Information
For detailed specification information on the PAN1026 Place and Play Bluetooth Module, visit our website at: