JMVDE Ideal for compressor and motor control JM RELAYS Inrush 80A, 1a 20A power relay FEATURES Compact, high-capacity, and Conforms to the various safety resistant to inductive loads standards It can control an inductive load with UL, CSA, VDE available inrush current of 80 A and steady The line up can support economical state current of 20 A. mounting methods. Excellent contact welding resistance The relay are equipped with a drive Flat type High contact pressure, a forced opening terminal (coil terminal) on one side for mechanism, and a forced wiping PCBs, and a load terminal (tab terminal mechanism realizes an excellent contact 250) on the reverse side. The line up welding resistance. includes the TM type which can be High breakdown voltage and surge attached directly to the PCB composing a resistant relay drive circuit, and the TMP type which More than 6.4 mm .252 inch maintained supports economical wiring. The TMP type can also be directly attached, and a for the insulation distance between high capacity load can be wired to the tab contacts and coil, and the breakdown terminal. voltage between contacts and coil is Slim type 5,000 V for 1 minute. In addition, the surge resistance between contacts and TYPICAL APPLICATIONS coil is greater than 10,000 V. Resistant to external force Compressor and heater control in An absorber mechanism is used on the air conditioners load terminals, giving a large Power control in hot air type heaters improvement in characteristics variations Magnetron control in microwave caused by the external force during ovens FASTON placement/removal. Lamp and motor control in Flux resistance mechanism OA equipment such as copiers and The terminal area is plugged with resin to facsimiles. prevent ux seepage during PCB RoHS compliant mounting. (TMP type) ORDERING INFORMATION JM 1a N F JM relay Contact arrangement 1a: 1 Form A Pickup voltage N: 70% of nominal voltage Classification of type Nil: Slim type Z: Flat type Mounting classification TMP: TMP type TM: TM type (Flat type) P: PCB type (Slim type) Nominal coil voltage DC5V, DC6V, DC9V, DC12V, DC24V, DC48V Contact material F: AgSnO2 type Note: Certified by UL, CSA and VDE ASCTB184E 201202-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/JM TYPES Part No. Nominal coil voltage TMP type (Flat) TM type (Flat) TMP type (Slim) PCB type (Slim) 5V DC JM1aN-ZTMP-DC5V-F JM1aN-ZTM-DC5V-F JM1aN-TMP-DC5V-F JM1aN-P-DC5V-F 6V DC JM1aN-ZTMP-DC6V-F JM1aN-ZTM-DC6V-F JM1aN-TMP-DC6V-F JM1aN-P-DC6V-F 9V DC JM1aN-ZTMP-DC9V-F JM1aN-ZTM-DC9V-F JM1aN-TMP-DC9V-F JM1aN-P-DC9V-F 12V DC JM1aN-ZTMP-DC12V-F JM1aN-ZTM-DC12V-F JM1aN-TMP-DC12V-F JM1aN-P-DC12V-F 24V DC JM1aN-ZTMP-DC24V-F JM1aN-ZTM-DC24V-F JM1aN-TMP-DC24V-F JM1aN-P-DC24V-F 48V DC JM1aN-ZTMP-DC48V-F JM1aN-ZTM-DC48V-F JM1aN-TMP-DC48V-F JM1aN-P-DC48V-F Standard packing: Carton 50 pcs., Case 200 pcs. RATING 1. Coil data Nominal operating Nominal coil Pick-up voltage Drop-out voltage Coil resistance Nominal operating Max. applied voltage current voltage (at 20C 68F) (at 20C 68F) 10% (at 20C 68F) power (at 60C 140F) 10% (at 20C 68F) 5V DC 180 mA 27.8 6V DC 150 mA 40 70%V or less of 10%V or more of 9V DC 100 mA 90 110%V of nominal voltage nominal voltage 900mW nominal voltage 12V DC 75 mA 160 (Initial) (Initial) 24V DC 37.5 mA 640 48V DC 18.75mA 2,560 2. Specications Characteristics Item Specications Contact material AgSnO2 type Contact Arrangement 1 Form A Contact resistance (Initial) Max. 100 m (By voltage drop 6 V DC 1A) Nominal switching capacity (resistive load) 20A 250V AC Max. switching power (resistive load) 5,000VA Rating Max. switching voltage 250V AC Max. switching current 20A 1 Min. switching capacity (reference value)* 100mA, 5V DC Insulation resistance (Initial) Min. 100M (at 500V DC) Measurement at same location as Breakdown voltage section. Between open contacts 1,000 Vrms for 1 min. (Detection current: 10 mA) Breakdown voltage (Initial) Between contact and coil 5,000 Vrms for 1 min. (Detection current: 10 mA) Max. 55C 131F (By resistive method, nominal coil voltage applied to coil: 100%V, Electrical Temperature rise (coil) contact carrying current: 20A, at 60C 140F) characteristics 2 Surge breakdown voltage* 10,000 V (Between contact and coil) (Initial) Operate time (at nominal voltage) (at 20C 68F) Max. 20 ms (excluding contact bounce time.) Release time (at nominal voltage) (at 20C 68F) Max. 10 ms (excluding contact bounce time) (Without diode) 2 Functional 98 m/s (Half-wave pulse of sine wave: 11 ms detection time: 10s.) Shock resistance 2 Destructive 980 m/s (Half-wave pulse of sine wave: 6 ms.) Mechanical characteristics Functional 10 to 55 Hz at double amplitude of 1.6 mm (Detection time: 10s.) Vibration resistance Destructive 10 to 55 Hz at double amplitude of 2 mm 6 Mechanical (at 180 times/min.) Min. 10 Expected life 5 Electrical (at 20 times/min.) Min. 10 (at nominal switching capacity) Ambient temperature: 40C to +60C 40F to +140F, 3 Conditions for operation, transport and storage* Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) Conditions Max. operating speed 20 times/min. (at nominal switching capacity) Slim TMP and Slim PCB: Approx. 28 g .99 oz Unit weight Flat TMP: Approx. 30 g 1.06 oz Flat TM: Approx. 30 g 1.06 oz * Specications will vary with foreign standards certication ratings. Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2. Wave is standard shock voltage of 1.250s according to JEC-212-1981 *3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage conditions in NOTES. 3. Switching capacity 20 A, 250 V AC 5 Resistive load 10 (at 20 times/min.) (cos = 1) Inrush 70 A, Steady 20 A 5 Electrical Life 10 (at 20 times/min.) (250 V AC cos = 0.7) Inductive load (cos = 0.7) Inrush 80 A, Cut-off 80 A (When the motor is locked) 3 1.510 (at 20 times/min.) (250 V AC cos = 0.7) 1 Note: Standard UL and CSA 1HP, 20A 250VAC 1 /2HP, 20A 125VAC ASCTB184E 201202-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/