TQTESTING LOW PROFILE TQ RELAYS 2 FORM C RELAY FEATURES 9 .354 High sensitivity: 26.7 +0.4 5 -0.2 1.051 2 Form C: 140 mW power consumption (single side stable type) +.016 9 .197 -.008 14 .354 .551 4 Form C: 280 mW power consumption (single side stable type) +0.4 5 -0.2 +.016 .197 -.008 Surge voltage withstand: 1500 V FCC Part 68 Sealed construction allows automatic washing Self-clinching terminal also available M.B.B. contact types available mm inch SPECIFICATIONS Contact Characteristics Standard Standard M.B.B.type M.B.B.type (B.B.M) type (B.B.M) type 1 Arrangement 2 Form C 4 Form C 2 Form D Initial insulation resistance* Min. 1,000 M (at 500 V DC) Initial contact resistance, max. 750 Vrms for 1 min. 300 Vrms for 1 min. 50 m Between open (By voltage drop 6 V DC 1A) (Detection current: (Detection current: contacts 10 mA) 10 mA) Contact material Gold-clad silver Initial breakdown Between contact 1,000 Vrms for 1 min. Nominal switching capacity 1 A 30 V DC 1 A 30 V voltage and coil (Detection current: 10 mA) (resistive load) 0.5 A 125 V AC DC Between contact 1,000 Vrms for 1 min. Max. switching power 30 W, 62.5 V A 30 W sets (Detection current: 10 mA) (resistive load) Rating FCC surge voltage between open Max. switching voltage 110 V DC, 125 V AC 110 V DC 1,500 V contacts Max. switching current 1 A 3 Operate time Set time * Max. 3 ms (Approx. 2 ms) Min. switching capacity I110 A 10 mV DC (at 20C) Max. 3 ms (Approx. 2 ms) 140 mW 4 Release time Reset time * Max. 3 ms (Approx. 1 ms) (3 to 12 V DC) 280 mW (at 20C) Max. 3 ms (Approx. 2 ms) 200 mW (3 to 24 V DC) 8 Single side stable 200 mW M.B.B. time* Min. 10 s. (24 V DC) 400 mW 2 300 mW (48 V DC) Temperature rise* (at 20C) Max. 50C (48 V DC) 5 2 Functional* Min. 490 m/s 50G Nominal Shock resistance 100 mW 6 2 Destructive* Min. 980 m/s 100G operating (3 to 12 V DC) 2 power 1 coil latching 200 mW 176.4 m/s 18G , 10 to 55 Hz 150 mW 7 Functional* at double amplitude of 3 mm Vibration (24 V DC) 2 resistance 294 m/s 30G , 10 to 55 Hz 200 mW Destructive at double amplitude of 5 mm (3 to 12 V DC) 2 coil latching 400 mW 300 mW Conditions for Ambient 40C to +70C 40C to +50C (24 V DC) operation, trans- temperature 40F to +158F 40F to +122F 9 port and storage* 8 7 Mechanical (at 180 cpm) 10 10 (Not freezing and Expected 1 A 30 V DC Humidity 5 to 85% R.H. Electrical 5 5 condensing at low life (min. 210 10 resistive (at 20 cpm) temperature) opera- (1 A 30 V 0.5 A 125 V AC tions) 5 2 Form C: Approx. 1.5 g .053 oz 10 DC resistive) resistive Unit weight 4 Form C: Approx. 3 g .106 oz. Note: I 1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (SX relays are available for low level load switching 10 A 1 mV DC 10 mA 10 V DC ) 8 * M.B.B. time: Remarks Min. 10 s * Specifications will vary with foreign standards certification ratings. 1 * Measurement at same location as Initial breakdown voltage section. Measuring 2 * By resistive method, nominal voltage applied to the coil contact carrying current: condition 1 A. 3 * Nominal voltage applied to the coil, excluding contact bounce time. 4 * Nominal voltage applied to the coil, excluding contact bounce time without diode. 500 5 * Half-wave pulse of sine wave: 11 ms detection time: 10 s. 6 * Half-wave pulse of sine wave: 6 ms. 5 V DC 7 * Detection time: 10 s. 9 * Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (see catalog). en ds 61020 0001: 100805J 1TQ ORDERING INFORMATION 2LH22M3V EX. TQ Contact arrangement Terminal shape Operating function MBB function Coil voltage (DC) 2: 2 Form C Nil: Standard PC board Nil: Single side stable Nil: Standard 3, 4.5, 5, 6, 9, 4: 4 Form C terminal L: 1 coil latching (B.B.M.) type 12, 24, 48* V H: Self-clinching terminal L2: 2 coil latching 2M: 2M.B.B. type *48 V coil type: Single side stable only Notes: 1. AgPd stationary contact types available for high resistance against contact sticking. When ordering, please add suffix-3 like TQ2-12V-3. 2. M.B.B. contact types are available only for TQ2 type. TYPES AND COIL DATA (at 20 C 68 F) 1. Standard (B.B.M.) type 2 Form C type 1. Single side stable Part No. Nominal Nominal Max. Nominal Pick-up Drop-out Coil operating operating allowable voltage, voltage, voltage, resistance, Standard PC Self-clinching current, power, voltage, V DC V DC (max.) V DC (min.) ( 10%) board terminal terminal mA (10%) mW V DC TQ2-3 V TQ2H-3 V 3 2.25 0.3 46.7 64.3 140 4.5 TQ2-4.5 V TQ2H-4.5 V 4.5 3.38 0.45 31.1 144.6 140 6.7 TQ2-5 V TQ2H-5 V 5 3.75 0.5 28.1 178 140 7.5 TQ2-6 V TQ2H-6 V 6 4.5 0.6 23.3 257 140 9 TQ2-9 V TQ2H-9 V 9 6.75 0.9 15.5 579 140 13.5 TQ2-12 V TQ2H-12 V 12 9 1.2 11.7 1,028 140 18 TQ2-24 V TQ2H-24 V 24 18 2.4 8.3 2,880 200 36 TQ2-48 V TQ2H-48 V 48 36 4.8 6.25 7,680 300 57.6 2. 1 Coil latching Part No. Nominal Nominal Max. Nominal Coil Set voltage, Reset voltage, operating operating allowable voltage, resistance, Standard PC Self-clinching V DC (max.) V DC (min.) current, power, voltage, V DC ( 10%) board terminal terminal mA (10%) mW V DC TQ2-L-3 V TQ2H-L-3 V 3 2.25 2.25 33.3 90 100 4.5 TQ2-L-4.5 V TQ2H-L-4.5 V 4.5 3.38 3.38 22.2 202.5 100 6.7 TQ2-L-5 V TQ2H-L-5 V 5 3.75 3.75 20 250 100 7.5 TQ2-L-6 V TQ2H-L-6 V 6 4.5 4.5 16.7 360 100 9 TQ2-L-9 V TQ2H-L-9 V 9 6.75 6.75 11.1 810 100 13.5 TQ2-L-12 V TQ2H-L-12 V 12 9 9 8.3 1,440 100 18 TQ2-L-24 V TQ2H-L-24 V 24 18 18 6.3 3,840 150 36 3. 2 Coil latching Part No. Nominal Nominal Max. Nominal Coil Set voltage, Reset voltage, operating operating allowable voltage, resistance, Standard PC Self-clinching V DC (max.) V DC (min.) current, power, voltage, V DC ( 10%) board terminal terminal mA (10%) mW V DC TQ2-L2-3 V TQ2H-L2-3 V 3 2.25 2.25 66.7 45 200 4.5 TQ2-L2-4.5 V TQ2H-L2-4.5 V 4.5 3.38 3.38 44.4 101.2 200 6.7 TQ2-L2-5 V TQ2H-L2-5 V 5 3.75 3.75 40 125 200 7.5 TQ2-L2-6 V TQ2H-L2-6 V 6 4.5 4.5 33.3 180 200 9 TQ2-L2-9 V TQ2H-L2-9 V 9 6.75 6.75 22.2 405 200 13.5 TQ2-L2-12 V TQ2H-L2-12 V 12 9 9 16.7 720 200 18 TQ2-L2-24 V TQ2H-L2-24 V 24 18 18 12.5 1,920 300 28.8 Notes: 1. Specified value of the pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse. 2. Standard packing: Tube: 50 pcs. Case: 1,000 pcs. 3. In case of 5 V transistor drive circuit, it is recommend to use 4.5 V type relay. 4. AgPd stationary contact types available for high resistance against contact sticking. When ordering, please add suffix 3 like TQ2-12V-3. 2 en ds 61020 0001: 100805J