Mini-Com TX5e UTP Jack Module SPECIFICA TION SHEET TX5500 UTP Copper specifications Cabling System Category 5e/Class D, 8-position, UTP jack module shall terminate Mini-Com TX5e UTP solid, 4-pair, 24 22 AWG, 100 ohm unshielded twisted pair Jack Module cable and shall not require use of a punchdown tool. UTP jack Jack Module: CJ5E88TIW* modules shall use a forward motion termination method to optimize TX5500 UTP Copper Cable performance by maintaining cable pair geometry while eliminating conductor untwist. The termination cap shall be color-coded red to Plenum: PUP5504*** designate Category 5e performance and shall include a universal Riser: PUR5504*** label coded for T568A and T568B wiring schemes. LSZH (60332-1): PUL5504*** LSZH (60332-3): PUZ5504** technical information CM: PUC5504*** TX5e UTP Patch Cords Category 5e/Class D Exceeds channel requirements of ANSI/TIA-568-C.2 Category 5e channel and component and ISO 11801 Class D standards at swept frequencies CM (foot lengths): UTPCH Y performance: 1 to 100 MHz CM (meter lengths): UTPCH MY Exceeds component requirements of ANSI/TIA-568-C.2 Category LSZH (meter lengths): UTPCHL MY 5e and ISO 11801 Class D standards at swept frequencies 1 to 100 MHz Mini-Com Angled Modular FCC and ANSI Meets ANSI/TIA-1096-A contacts plated with 50 microinches of Patch Panels compliance: gold for superior performance 24-port, 1 RU: CPPLA24WBLY PoE compliance: Rated for 2500 cycles with IEEE 802.3af / 802.3at and proposed 48-port, 2 RU: CPPLA48WBLY 802.3bt type 3 and type 4 Mini-Com Flat Modular Patch Panels IEC compliance: Meets IEC 60603-7 RoHS compliance: Compliant 24-port, 1 RU: CPPL24WBLY 48-port, 2 RU: CPPL48WBLY UL rated: UL 1863 approved For additional modular and punchdown patch Conductor termination: Wire cap compatible with 24 22 AWG solid cable with conductor panels, visit www.panduit.com. range: insulation diameters of 0.035 in. to 0.048 in. and overall cable O.D. Tools and Accessories 0200 in. to 0.250 in. Jack module termination tool: CGJT key features and benefits Wire snipping tool: CWST Wire stripping tool: CJAST 100% performance tested Confidence that each jack module will deliver the critical Clear dust cap: MDC-C electrical performance requirements Blockout device: PSL-DCJB- Utilizes enhanced Optimizes performance by eliminating conductor untwist and Phone icons: CIPIW-C+ Giga-TX Technology reduces installation time and expense Data icons: CIDIW-C+ Improved termination cap Conductor retention slots simplify jack module termination *To designate color other than IW (Off White), Modular UTP jack modules snap in and out of all Mini-Com replace IW suffix with EI (Electric Ivory), Faceplates, Modular Patch Panels and Surface Mount Boxes IG (International Gray), WH (White), AW (Arctic White), BL (Black), BU (Blue), for easy moves, adds and changes RD (Red), YL (Yellow), GR (Green), OR (Orange), VL (Violet), BR (Brown), True strain relief Controls cable bend radius for long term installed performance GD (Gold), LB (Light Blue) or PK (Pink). Individually serialized Marked with quality control number for future traceability **To designate color, add suffix BU (Blue) RJ45 interface Industry standard interface provides a quick and easy plug and or WH (White). For additional cable colors, contact customer service. play connection to RJ45 patch cords backwards compatible For lengths 1 to 20 feet (one foot increments) Identification Can be clearly identified with optional labels and icons for and 25, 30, 35, 40 feet, change the length port identification designation in the part number to the desired length. For standard cable colors other than Termination tools (optional) CGJT termination tool ensures conductors are fully terminated Off White, add suffix BL (Black), BU (Blue), RD (Red), YL (Yellow), GR (Green), OR (Orange) by utilizing a smooth forward motion without impact on critical or VL (Violet). For example, the part number internal components for maximum reliability for a blue 15-foot patch cord is UTPSP15BUY. Block out device (optional) Provides a simple and secure method to control access to For lengths 1 to 10 meters (one meter increments) and 0.5, 1.5, 2.5, 15, 20, meters, data ports while not in use change the length designation in the part number to the desired length. For standard cable colors other than Off White, add suffix applications BL (Black), BU (Blue), RD (Red), YL (Yellow), GR (Green), OR (Orange) or VL (Violet). For example, the part number for a blue 15-meter Mini-Com TX5e UTP Jack Modules are the following applications: patch cord is UTPSP15MBUY. a component of the TX5500 UTP Copper Ethernet 10BASE-T, 100BASE-T (Fast To designate color other than Red, add Cabling System. This end-to-end system Ethernet), 1000BASE-T (Gigabit Ethernet) suffix BL (Black), BU (Blue), YL (Yellow), GR (Green), OR (Orange), IW (Off White) or IG provides Gigabit Ethernet performance with 155 Mb/s ATM, 622 Mb/s ATM (International Gray) at end of the part number. 10/package. usable bandwidth beyond 100 MHz. With Token ring 4/16 certified performance to the ANSI/TIA-568-C.2 Voice/data systems +To designate color other than IW (Off White), replace IW with EI (Electric Ivory), IG Category 5e and ISO 11801 Class D Voice over Internet Protocol (VoIP) (International Gray), BL (Black), BU (Blue), RD (Red), YL (Yellow), GR (Green), OR standards, this system will support (Orange) or VL (Violet) in the part number. 100/package. www.panduit.com Contact customer service for bulk packaged jack modules and patch cords. Mini-Com TX5e UTP Jack Module Test Results 20 MHz 100 MHz Performance Test Test Method Typical Test Results Typical Test Results NEXT Additional Transmission > 57 > 43 Performance Specifications FEXT > 49 > 35.1 for 4-pair ohm Category 5e Attenuation < 0.18 < 0.40 Cabling, ANSI/TIA-568-C.2 Return Loss > 24 > 20 Consult technical support for cable brand specific channel test results. Mechanical Test Test Method Measurement Typical Performance Normal Force Load (grams) > 100 Vibration IEC 512-6d Circuit Resistance Change (mOhms) < 40 Durability IEC 512-9a Circuit Resistance Change (mOhms) < 40 Mating/Unmating IEC 512-13b Mating Force (N) < 20 Unmating Force (N) < 20 Mechanical Test Test Method Measurement Typical Performance Low Level Circuit Resistance IEC 512-2a Resistance (mOhms) < 40 Dielectric Withstand Voltage IEC 512-4a 1000VAC, 1 minute Passed Insulation Resistance IEC 512-3a Resistance (MOhms) > 1000 Mechanical Test Test Method Measurement Typical Performance Temperature Life IEC 512-9b Circuit Resistance Change (mOhms) < 40 Humidity IEC 512-11c Circuit Resistance Change (mOhms) < 40 Thermal Shock IEC 512-11d Circuit Resistance Change (mOhms) < 40 Climactic Sequence IEC 512-11a Circuit Resistance Change (mOhms) < 40 Flowing Mixed Gas Corrosion IEC 512-11g Circuit Resistance Change (mOhms) < 40 0.71 18.1 Twist 1.43 0.62 36.4 Preservation Cap 15.8 Module Housing Dimensions are in inches Dimensions in brackets are metric WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia cs-cdn panduit.com cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2015 Panduit Corp. Visit us at www.panduit.com ALL RIGHTS RESERVED. Contact Customer Service by email: cs panduit.com COSP253--WW-ENG 5/2016 or by phone: 800.777.3300