Pan-Way LD Surface Raceway System SPECIFICATION SHEET LD Raceway Raceway: LD3IW**-A LD5IW**-A LD10IW**-A LD Raceway Fittings specifications Coupler: CF*IW-E LD non-metallic series low voltage, one-piece hinged design, Inside corner: ICFC*IW-X single channel surface raceway shall include adhesive backing Outside corner: OCFC*IW-X and shall be made of impact resistant material with a smooth Right angle: RAFC*IW-X finish that shall not scratch, peel or corrode. The raceway shall End cap: ECF*IW-X include an assortment of bend radius and standard fittings that Tee: TFC*IW-X complement the offering to help route, protect and conceal low Four-way cross: CRFC5IW-X voltage data, voice and video cabling. LD raceway shall be Drop ceiling/ available in three sizes and four standard colors that shall be entrance end: DCF*IW-X optimized with the Panduit Pan-Net communication system. Right angle/ entrance end: RAEFXIW-X LD5 to LD3 reducer: RF5X3IW-E LD10 to LD5 technical information reducer: RF10X5IW-X Material: Rigid PVC LD10 to LD3 reducer: RF10X3IW-X Flammability: UL94V-0 FT4 LD5 fire box Capacity: Single Channel adapter: FBA5IW-X LD10 fire box Voltage Rating: 50V or less adapter: FBA10IW-X Operating and 0 to 50o C LD Raceway Installation Storage Temperature: Installation tool: LDW*-V LD Raceway Surface Mount Outlet/Junction Boxes Low Voltage: Single gang, key features and benefits onepiece : JB1IW-A Single gang, 1 bend radius Cables in the raceway will satisfy the minimum 1 bend radius one-piece, deep: JB1DIW-A control fittings: requirement, preventing the potential degradation of cable Single gang, performance meets TIA/EIA standards two-piece : JBX3510IW-A One-piece hinged design: Cables can be laid into the raceway, speeding installation and Single gang, two-piece, preventing damage to cables fast snap: JB1FSIW-A In-wall box adapter: JBA-X Adhesive backing: Full length adhesive strip allows easy tool free installation and works well for temporary mounting Power rated: Available in different Single gang, Accommodates varying cable types and capacities. sizes & lengths: two-piece: JBP1IW Available sizes - LD3, LD5,LD10 Single gang, Available lengths - 6,8,10 (2m length available in Europe only) two-piece, deep: JBP1DIW Non-metallic Lightweight, reducing installer fatigue and labor required to Single gang, construction: install the raceway solid color throughout will not chip, peel, two-piece, extension: JBP1EIW rust or corrode easy to cut with standard saws and saw blades, Single gang, two-piece, eliminating the need for special cutting devices intermediate: JBP1IIW Distinct colors: Available in four standard colors- IW,EI,IG,WH. AW available in Single gang, two-piece, Europe only. Raceway is field paintable to match walls and snap on: JBP1FSIW surrounding dcor Single gang, two-piece, round: RJBX3510IW Full selection of Wide variety of fittings and surface mount boxes available for Double gang, fittings and surface various LD raceway applications two-piece: JBP2IW mount boxes: Double gang, two-piece, deep: JBP2DIW Double gang, applications two-piece, divided: JBP2SIW Double gang, Pan-Way LD Surface Raceways are baseboards or ceilings. This raceway is a two-piece, snap on: JBP2FSIW designed to provide easy and economical perfect solution for schools, hospitals, offices, solutions for routing any low voltage cable homes or anywhere a small, secure, low * Insert raceway size of 3, 5, or 10 along smooth and clean perimeter walls, profile raceway is needed. ** Insert raceway length of 6, 8, or 10 All parts listed in International White (IW) color. To order other colors substitute Electrical Ivory (EI), International Gray (IG), and White (WH). www.panduit.com Pan-Way LD Surface Raceway System Wire Fill FIber Optic Electrical Cables Audio/Video Cable 14 12 10 Data Grade Cables AWG AWG AWG 24 AWG/UTP CM Fill Raceway Type THHN/T90 Cat 5e Plenum Cat. 6 Cat. 6A Cat. 6A (SD) Area RG6 2 Strand and Configuration 2 (in ) 0.111 0.130 0.164 DIA. = 0.193 DIA. = 0.24 DIA. = 0.30 DIA. = 0.24 DIA. = 0.275 DIA. = 0.175 FILL FILL FILL FILL FILL FILL FILL MAX MAX MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX (UL Temp Rise Test) 40% 60% 40% 60% 40% 60% 40% 60% 40% 60% 40% 60% LD3 0.21 ** ** ** 2 4 1 2 1 1 1 2 1 2 3 5 LD5 0.38 ** ** ** 5 7 3 5 2 3 3 5 2 3 6 9 LD10 1.00 ** ** ** 13 20 8 13 5 8 8 13 6 10 16 24 LD Raceway 0.94 23.9 0.58 0.46 14.8 11.7 0.70 0.50 0.055 1.00 17.8 12.7 1.4 25.4 1.01 0.77 1.51 25.8 19.6 38.4 LD3 LD5 LD10 Fittings ICFC CF OCFC RAFC ECF TFC CRFC5 DCF RF RAEFX FBA LDW www.panduit.com