LC OptiCam Pre-Polished Fiber Optic Connectors
SPECIFICATION SHEET
specifications
LC small form factor (SFF) pre-polished connectors with rear pivot
latch shall be TIA/EIA-604 FOCIS-10 compatible and contain a
factory-terminated fiber, eliminating field polishing and adhesive.
LC pre-polished connectors shall have an average insertion loss
LC OptiCam Pre-Polished Connectors
of 0.3dB per mated pair for multimode and singlemode fiber.
with Zirconia Ceramic Ferrules
LC pre-polished connectors shall captivate fiber and buffer in one
10Gig 50/125m (laser
action allowing for up to two re-terminations with no degradation
optimized) simplex: FLCSMCXAQY
in performance.
10Gig 50/125m (laser
optimized) duplex: FLCDMCXAQY
technical information
50/125m simplex: FLCSMC5BLY
50/125m duplex: FLCDMC5BLY
Standards requirements: TIA/EIA-604 FOCIS-10 compatible; exceeds
62.5/125m simplex: FLCSMC6BLY
TIA/EIA-568-B.3 requirements
62.5/125m duplex: FLCDMC6BLY
Fiber compatibility: 62.5/125m OM1, 50/125m OM2, 10Gig 50/125m
9/125m simplex: FLCSSCBUY
laser optimized OM3/OM4 and 9/125m OS1/OS2
9/125m duplex: FLCDSCBUY
Fiber cable type: 900m tight-buffered cable only
OptiCam 1.6/2.0mm Boots
10Gig multimode (aqua): FMCBT2AQ-X*
Fiber cable size: 1.6mm 2.0mm and 3.0mm jacketed cable with optional boots
Multimode (black): FMCBT2BL-X
Ferrule type: Zirconia ceramic with a pre-polished fiber stub Singlemode (blue): FSCBT2BU-X
OptiCam 3.0mm Boots
Insertion loss: Ceramic: 0.3dB average (multimode and singlemode)
10Gig multimode (aqua): FMCBT3AQ-X*
Return loss: Ceramic: >20dB (multimode), >26dB (10Gig multimode),
Multimode (black): FMCBT3BL-X
>50dB (singlemode)
Singlemode (blue): FSCBT3BU-X
*X = Bag of 10 Boots; 100 per carton.
key features and benefits
OptiCam Termination Tooling
OptiCam Termination Kit: FCAMKIT
LC OptiCam Connectors
OptiCam Conversion Kit
Factory pre-polished fiber Eliminates inconsistent and time-consuming field polishing to deliver
(upgrades Opti-Crimp
stub endface required optical performance; reduces termination time (less than
Kit to also terminate
half the time of field polish connectors) and the number of OptiCam Connectors): FPPKIT-CVY
Field Polish Kit Upgrade
installation tools required
(upgrades Field Polish
Dual cam design with Secures both the fiber and the buffer during the camming step to
Kit to also terminate
OptiCam Connectors): FIELDKITUPG
fiber and buffer clamps facilitate consistent termination results; reduces the termination time
LC cradles (2 per pkg.): FLCC
compared to conventional termination methods
LC Fiber Optic Adapters
Allows up to two re-terminations to achieve optimum termination
results; reduces the number of rejected connectors and terminations 10Gig multimode: FADJLCAQ-L*
Multimode: FADJLCEI-L
to provide yield rates approaching 100% for lower installed costs
Singlemode: FADJLCZBU-L
Translucent Facilitates inspection of the fiber termination quality; results in rapid
*L = Bag of 50 adapters; 100 per carton.
housing assembly installations, improved termination yields, and lower installed costs
Mini-Com LC Adapter Modules
Non-optical disconnect Maintains data transmission under tensile loads for jacketed cable
10Gig multimode: CMDJAQLC**
Multimode: CMDJEILC**
Mechanical cable retention Consistently provides higher than industry standard cable retention;
Singlemode: CMDJLCZBU
requires no adhesive, speeding installation
**Substitute for module color: EI = Electric Ivory,
BU = Blue, BL = Black, IW = Off White,
Zirconia ceramic ferrules Provide the highest durability for repeated matings
AW = Arctic White
Opticom LC Fiber Adapter Panels
OptiCam Termination Tool
6 duplex MM adapters: FAP6WEIDLC
Universal termination tool Secures both fiber and buffer in one action for all OptiCam
6 duplex SM adapters: FAP6WBUDLCZ
Connectors with connector specific cradles (included); ensures
12 duplex MM adapters: FAP12WEIDLC
fast, consistent, and optimal terminations 12 simplex SM adapters: FAP12WBULCZ
Opti-Core LC Patch Cords
Integrated visual Offers visual indication of proper termination after the cam step
Duplex LC to LC: F^E10-10MY
termination indicator (VTI) has been completed; virtually eliminates operator error to deliver
Simplex LC to LC: F^F10-10MY
a lower installed cost
Duplex SC to LC: F^E3-10MY
Simplex SC to LC: F^F3-10MY
applications
LC Lock-in Duplex Clip
LC lock-in duplex clip: FLCCLIW-X
LC fiber optic connectors are widely used in fiber LC OptiCam Connectors eliminate the need for
optic backbone and horizontal applications for end face polishing and adhesive providing easier,
Add -C to simplex connector part numbers
high-speed data transmission. Typical faster installation, especially in remote areas
for bulk packs of 100 connectors.
applications for LC OptiCam Connectors and confined spaces. The hand-held OptiCam
^Substitute for fiber type: 6 = 62.5/125m OM1,
5 = 50/125m OM2, X = 10Gig 50/125m
include maintenance or emergency restoration of Termination Tool gives installers the flexibility
OM3/OM4 or 9 = 9/125m OS1/OS2.
fiber networks and retrofit/initial install in both to terminate in very close proximity to the
Substitute for length in meters: 1, 2, 3, 5 or 10.
behind-the-wall (BTW) and in the permanent side application without having to switch tools
Contact Customer Service for other available lengths.
of panelized interconnect and cross-connect. or find benchtop space.
www.panduit.com
LC OptiCam Pre-Polished Fiber Optic Connectors
performance information
Test Parameter Description Result
Qualification test suite Complete testing protocol per TIA/EIA-568-B.3 Exceeds TIA/EIA-568-B.3 requirements
(TIA/EIA-568-B.3 requirements) using TIA/EIA FOTPs that include mechanical,
environmental, and optical test sequences
Dimensional and material compliance to All connectors are FOCIS compatible with
Connector intermatability
TIA/EIA standards TIA/EIA-604-10
Exceeds TIA/EIA-568-B.3 test requirements:
Repeated mating 500 mate/unmate cycles
<0.1dB additional insertion loss
Max. insertion loss: 0.75dB
Min. return loss: 20dB
Cable retention (straight pull): TIA/EIA-568-B.3 requirement: Exceeds TIA/EIA-568-B.3 requirements:
900m tight-buffered fiber
0.5 lbs. load applied with <0.5dB increase in 1.0 lbs. avg. load applied with <0.2dB
insertion loss after test increase in insertion loss after test
Jacketed cable 11.24 lbs. load applied with <0.1dB increase
11.24 lbs. load applied with <0.5dB increase in
in insertion loss after test*
insertion loss after test
*Jacketed cable retention tensile load may vary based on specific manufacturer's jacketed cable diameter and aramid yarn count.
selection information
Connector Ferrule Boot
Ferrule Backbone Average Return
Part Number
Fiber
Type Finish Color Loss
Material Color Insertion Loss**
Simplex
FLCSMCXAQY 10 GbE 50/125m
Zirconia
(laser optimized) SPC Aqua Aqua 0.3dB >26dB
Ceramic
FLCDMCXAQY Duplex
OM3/OM4
FLCSMC5BLY Simplex
Zirconia
50/125m OM2 SPC Black Black
0.3dB >20dB
Ceramic
FLCDMC5BLY Duplex
Simplex
FLCSMC6BLY
Zirconia Electric
62.5/125m OM1
SPC Black 0.3dB
>20dB
Ceramic
Ivory
FLCDMC6BLY Duplex
FLCSSCBUY Simplex
Zirconia
Blue >50dB
9/125m OS1/OS2 UPC Blue 0.3dB
Ceramic
FLCDSCBUY Duplex
**All connector insertion loss values calculated from tests taken with precision launch jumper assemblies per TIA/EIA-FOTP-171.
OptiCam Termination Tool LC Lock-In Duplex Clip
LC OptiCam Pre-Polished LC OptiCam Pre-Polished
Simplex Connector Duplex Connector
.25
[6.35]
.25
2.23
2.23
[56.6] (6.35)
(56.6)
2.23
2.23
(56.6) [56.6]
FLCSMC***Y FLCDMC***Y OCTT FLCCLIW-X
(Patch cords available separately
or in termination kits)
***Substitute for fiber type: For multimode, insert XAQ for 10Gig 50/125m, 5BL for 50/125m, 6BL for 62.5/125m. For singlemode, insert BU for 9/125m, and replace M with S.
Dimensions are in inches [Dimensions in brackets are in millimeters]
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD.
Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Jalisco, Mexico Victoria, Australia
cs-cdn@panduit.com cs-emea@panduit.com cs-ap@panduit.com cs-japan@panduit.com cs-la@panduit.com cs-aus@panduit.com
Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
2009 Panduit Corp.
Visit us at www.panduit.com
ALL RIGHTS RESERVED.
Contact Customer Service by email: cs@panduit.com
WW-FBSP19
or by phone: 800-777-3300 and reference FBSP19 9/2009