FR24TBE12 Panduit

A. System Overview PHYSICAL INFRASTRUCTURE SYSTEMS B. Copper Systems 24x4 FiberRunner Mounting Brackets C. Fiber Optic Systems For Std. Std. Threaded Pkg. Ctn. D. Part Number Part Description Rod Size Qty. Qty. Power over Existing Threaded Rod QuikLock Bracket for 24x4 System Ethernet FR24TBE12 Used to support the 24x4 system by spanning two 1/2 1 1/2 existing threaded rod drops. Can be installed from E. above or below. Bracket is secured to each threaded Zone rod with two nuts. The pre-assembled slide clamps Cabling enable fast assembly to channel. Use 7/16 nut driver FR24TBE12M 12mm 1 FR24TBE12 on slide clamps. FR24TBE12M New Threaded Rod QuikLock Bracket for 24x4 System F. FR24TBN12 Used to support the 24x4 system from new threaded 1/2 1 Wireless rod installations. Bracket is secured to threaded rod with two split nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16 nut driver FR24TBN12M 12mm 1 on slide clamps. G. Outlets Wyr-Grid Mounting Bracket for FiberRunner System FRTBWG30BL FiberRunner QuikLock Threaded Rod Trapeze 1/2 1 10 FR24TBN12 Bracket for Wyr-Grid 30 (762mm) width. Used to 12mm FR24TBN12M H. support FiberRunner 4x4, 6x4, 12x4, and 24x4 Media Channel above or below the Wyr-Grid 30 Pathway Distribution using the same 1/2 or 12mm threaded rod used to support the WGTB30BL bracket. Quick mount clips, FRQMC24-X are not included for installing the 24x4 I. channel. These must be purchased separately. Physical Infrastructure Management FiberRunner Quick Mount Clips J. FRQMC24-X Used whenever a FiberRunner 24x4 Channel is 10 50 FRTBWG30BL Overhead & installed on the FiberRunner Trapeze Bracket, Underfloor FRTBWG30BL for 30 Wyr-Grid Pathway. For use Routing with FiberRunner 24x4 Channel only. K. Two-Piece Ladder Rack Bracket for Attaching Threaded Rod to 1 1/2 2 Surface Ladder Rack Raceway F2PCLB12 Two-piece bracket attaches to 3/8 (9.5mm) wide x 1/2 1 10 1 1/2 (38.1mm) or 3/8 (9.5mm) wide x 2 (50.8mm) L. ladder rack rail. Bracket halves slide into position and Cabinets, clamp together on the ladder rack rail, which allows Racks & for a one-handed assembly of the threaded rod (not Cable included). Contains bracket and hardware for Management F2PCLB12 attaching bracket to ladder rack. M. Two Piece Framing Clip for Attaching 5/8 Threaded Rod to 2 x 9/16 Grounding & Bonding C-Channel Auxiliary Framing Bars FRAFC58 Two-piece framing clip attaches to auxiliary framing 5/8 1 10 bars. Framing clip halves slide into position and interlock on the auxiliary framing bars, allowing N. easier assembly of the threaded rod to bars. Industrial Contains two-piece framing clip and hardware for attaching framing clip to auxiliary framing bars. (5/8 threaded rod not included.) FRAFC58 O. Labeling & Identification P. Cable Management Accessories Q. Index For service and technical support, call 866-405-6654 (outside the U.S. and Canada, see catalog back cover). www.panduit.com J.9X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Racks & Rack Cabinet Accessories category: Click to view products by Panduit manufacturer: Other Similar products are found below : CR-1727 M00-PLN F2420 F2424 8310-1032-SS 9104 PLFF2000 PLFF6000 GP216 PTFA60000LG H-9163-B HEH050BA 1427C3 BAS-5104 N-700-2 190-002 HTL10 HTS10 PC-118 PC-780L PC-79 PC-800 SC4-28 F3024 AKWAMT PLFF1000 GRPB12PG CG3- 340S/12 2CWDP36 2CWDP48 2SSHINGE CP-001BK CPL19431LG1 R570-004-107 M6123-4007-SS TS170 531300535 BRX-12290 C4BD3077SBK1 UPS 7-17-14 PLAIN LP40 5261304-07 CCA26-44-01 706-102 CG3-160G 7112C-PLN ALUM CM10 TS81 7142 GP134