FiberRunner 2x2 Routing System
SPECIFICA TION SHEET
specifications
Channel and Cover
The 2x2 routing system shall be a system of channel, fittings,
and brackets designed to segregate, route, and protect fiber
2x2 solid hinged
optic and high performance copper cabling. Channel and fittings
channel (6'): HS2X2**6NM
shall be assembled using pre-assembled couplers. A selection
2x2 slotted hinged
of spillout options shall be available that easily attach using the
channel (6'): H2X2**6
vertical tee. Fittings maintain a minimum 2" bend radius to
2x2 hinged cover (6'): HC2**6
protect against signal loss due to excessive cable bends.
Cable retainer: WR2H-C
Available system colors shall be yellow, orange, and black. A full
complement of brackets shall be available for attaching system
Fittings and Spillouts
components to ladder rack, threaded rod, auxiliary framing,
strut, equipment racks and raised floor pedestals.
QuikLock Coupler: FBC2X2**
Horizontal right angle: FRA2X2**
technical information
Horizontal tee: FT2X2**
4-way cross: FFWC2X2**
Dimensions are in inches End cap: FHDEC2X2**
2.00 2
A = 3.4 in.
(50.8)
(Dimensions in parentheses 2
(2195mm )
Inside vertical 45: FIV452X2**
are metric).
Outside vertical 45: FOV452X2**
Inside vertical 90: FIVRA2X2**
2.17
(55.1)
Outside vertical 90: FOVRA2X2**
Open channel Cable No. of Cables 4x4 Fiber-Duct to
2x2 reducer: FRF42**
50% fill capacity: 1.6mm 546
4x4 FiberRunner to
(2" pile up) 2.0mm 349
2x2 reducer: FRRF4FD2**
3.0mm 155
Fiber Optic Vertical tee: FVTHD2X2**
Ribbon Interconnect 5.20mm 52
3-sided BRC
trumpet spillout: FTR2X2**
Category 6 6.35mm 35
1-port spillout
Category 6A 7.57mm 24
to 1.5" I.D.
corrugated tubing: FIDT2X2**
Material: Rigid PVC (Channel), ABS (Fittings)
2x2 hinged duct vertical
Flammability: 94V-0
cable manager kit: FRHD2KT**
Approvals: UL Listed to 2024A Optical Fiber Cable Routing Assemblies Hinged channel 1" bend
radius control trumpet: TRC2HDBL
Compliant with the applicable tests in Telcordia GR-63-CORE
Network Equipment Building Systems Level 3
Mounting Brackets
CSI spec form: LP-CSISPEC-FR
Existing 1/2" thr rod brkt: FTRBE12
Existing 5/8" thr rod brkt: FTRBE58
key features and benefits
New 1/2" thr rod brkt: FTRBN12
Fastest installations No bolts need to be tightened and no tools are required when installing the New 5/8" thr rod brkt: FTRBN58
QuikLock Coupler; QuikLock Couplers take less than five seconds to
Underfloor brkt: FUSB
make a mechanically secure connection
Ladder rack brkt: FLRB
Easy to maintain Hinged channel cover, hinged door vertical tee and solid fitting covers
L wall mount brkt: FLB
protect cabling and provide fast and easy access for future cabling moves,
Adjustable Z bracket: FZBA1.5X4
adds, and changes
Low profile Z bracket: FZBLP
System strength Robust system of channel, covers, fittings and other non-metallic system
Two-piece ladder rack brkt
components protect cable from physical damage; system includes full range
1/2" thr rod: F2PCLB12
of directional and spillout fittings
Two-piece ladder rack brkt
Versatility The vertical tee accepts a 3-sided trumpet, transition to corrugated tubing
5/8" thr rod: F2PCLB58
and Panduit FiberRunner and Fiber-Duct Systems
Two-piece framing clip 5/8"
Cable protection A minimum 2" bend radius maintained throughout all fittings prevents
thr rod to 9/16" C-channel
excessive bends in fiber optic cabling aux. framing bars: FRAFC58
**Substitute: YL = Yellow, OR = Orange, BL = Black
applications
The FiberRunner 2x2 Routing System is a the vertical tee. Fittings maintain a 2" bend radius to
system of channel, fittings, and brackets designed protect against signal loss due to excessive cable
to segregate, route, and protect fiber optic and high bends. Available system colors are yellow, orange,
performance copper cabling. It is suited for data and black to differentiate various types of cabling.
center applications where cable is routed from A full complement of brackets is available to attach
distribution areas to equipment cabinets or racks. system components to support structures found in
It is used in Telco Central Offices to route fiber optic all applications.
jumper cables between fiber distribution frames and The FiberRunner 2x2 Routing System is part of the
equipment bays. It can be deployed over the racks Panduit complete fiber distribution system, which
or in approved underfloor applications. includes the FiberRunner 24x4, 12x4, 6x4, and 4x4
Channel and fittings are assembled using timesaving Routing Systems, the Fiber-Duct 4x4 and 2x2
Panduit QuikLock Couplers. A selection of Routing Systems, cable management, and racks.
spillout options is available that easily attach using
www.panduit.com
FiberRunner 2x2 Routing System
channel and cover
HS2X2**6NM H2X2**6 HC2**6 WR2H-C
fittings, split covers, and spillouts
FBC2X2** FRA2X2** FT2X2** FFWC2X2** FHDEC2X2**
FIV452X2**
FRRF4FD2** FVTHD2X2**
FOV452X2** FIVRA2X2** FOVRA2X2** FRF42**
FTR2X2** FIDT2X2** FRHD2KT** TRC2HDBL
QuikLoc k Mounting Brackets
FTRBE12 FTRBN12 FUSB FLRB FLB FZBA1.5X4
FTRBE58 FTRBN58
FZBLP F2PCLB12 FRAFC58
F2PCLB58
**Substitute: YL = Yellow, OR = Orange, BL= Black
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD.
Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia
cs-cdn@panduit.com cs-emea@panduit.com cs-ap@panduit.com cs-japan@panduit.com cs-la@panduit.com cs-aus@panduit.com
Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information 2014 Panduit Corp.
ALL RIGHTS RESERVED.
Visit us at www.panduit.com
FRSP19--WW-ENG
Contact Customer Service by email: cs@panduit.com Replaces WW-FRSP06
or by phone: 800.777.3300 11/2014