specifications ST* fiber optic connectors shall be compliant NETWORK CONNECTIVITY GROUP with TIA FOCIS-2. ST* connectors shall contain a factory terminated pre-polished SPEC SHEET multimode fiber, requiring no field polishing and no adhesive. The fiber shall terminate in a 2.5mm ferrule and have a typical insertion loss of 0.3dB (62.5/125m) or 0.35dB (50/125m) per connector. ST* OPTI-CRIMP Fiber Optic Connector Pre-polished Crimp ST* OPTI-CRIMP technical information Multimode Connectors Fiber compatibility: 62.5/125m and 50/125m multimode versions available 62.5/125m black boot: FSTMMBL Fiber cable type: Tight-buffered cable only (3.0mm jacketed or 900m) 62.5/125m Ferrule type: Zirconia ceramic with a pre-polished fiber stub red boot: FSTMMRD 50/125m Insertion loss: 0.3dB typical (62.5/125m), 0.35dB typical (50/125m) black boot: FSTMM50BL Return loss: Greater than 20dB 50/125m red boot: FSTMM50RD ST* Adapter Modules with Phosphor Bronze Split Sleeve Simplex: CMST** key features and benefits ST* Adapter Modules with Zirconia Ceramic Split Sleeve Pre-polished fiber stub Eliminates polishing steps, speeding installation Simplex: CMSTZ** VFL verification during Provides installer with a visual signal when optimal crimp process continuity is made and the crimp step can be performed Multimode Patch Cords and Pigtails Mechanical crimp Consistently provides higher than industry standard cable Duplex ST* to ST*: F D2-2M cable retention retention requires no adhesive, speeding installation Simplex ST* to ST*: F S2-2M Proven 2.5mm Uses standard termination tools and procedures provides Simplex 900m ceramic ferrules strength and reliability buffered ST* pigtail: F B2-NM Robust design Protects fibers from mechanical and environmental stress Duplex ST* to SC: F D2-3M Duplex FJ plug FOCIS-2 compliant Ensures intermatability with all FOCIS-2 compliant to ST*: F D6P-2M components Available in 62.5/125m (6) and 50/125m (5). Exceeds TIA/EIA-568-B.3 Network reliability assured as defined by TIA Patch cords are available in 1, 2, 3, 5 and 10 meter lengths, and pigtails are available in 1, 2 and 3 meter lengths. OPTI-CRIMP Termination Tooling Termination kit: FJMVKIT applications To upgrade from FJKITG, purchase FJQCVR fiber cleaver tool and FVFLKIT visual fault The ST* OPTI-CRIMP Fiber Optic Connector time over standard field polish ST* connectors locator kit. improves an industry standard design. by 50%. ST* Fiber Optic Connectors are To upgrade from FJMKIT, purchase FVFLKIT Elimination of end face polishing and widely used in fiber optic backbone and visual fault locator kit. adhesive provides for easier, faster horizontal applications for high-speed data installation, especially in remote areas and transmissions. **Substitute for Colors: confined spaces. This reduces installation EI = Electric Ivory BU = Blue BL = Black installer tips IW = Off White AW= Arctic White Terminate on tight-buffered cable only. Always use FVFL Visual Fault Locator during termination. *ST is a registered trademark of Lucent Technologies. Visit our website at: www.panduit.com/ncg ST* OPTI-CRIMP Fiber Optic Connector Pre-polished Crimp Standards Compliant Connector Performance TIA Test Procedure and Description Typical Performance TIA/EIA-568-B.3 Required Performance 455 Apply 1.1lb. (jacketed) or .5lb (buffered) load thru 180 for 100 cycles 1 Flex < 0.1dB additional loss 0.75dB maximum insertion loss 8 drops from 1.8m 2 < 0.1dB additional loss Impact 0.75dB maximum insertion loss 60C for 4 days 4 High Temperature < 0.1dB additional loss 0.75dB maximum insertion loss 40at 95% RH for 4 days <0.4dB additional loss 5 Humidity < 0.1dB additional loss 0.75dB maximum. insertion loss Apply 11.24 lbs. (jacketed) or 0.5lb (buffered) load for 5 seconds, 0 angle Cable Retention 4.4lb (jacketed) 0.5lb (buffered) at 90<0.5dB additional loss 0.75dB 6 (Buffered) < 0.1dB additional loss (Jacketed) maximum insertion loss Mate/unmate connectors (500 cycles) < 0.1dB additional loss 21 Durability 0.75dB maximum insertion loss 0.3dB typical (62.5/125m), 34 Insertion Loss 0.75dB maximum insertion loss 0.35dB typical (50/125m) Apply 3.4lb (jacketed) 0.5lb (buffered) load, 10 cycles from +90 to -90 36 Twist < 0.1dB additional loss 0.75dB maximum insertion loss 107 Return Loss 20dB minimum >20dB Pull plug from jack, 7.4lb load for 5 seconds at 0 185 Coupling Strength < 0.1dB additional loss 0.75db maximum insertion loss 0C for 4 days <0.3dB additional loss 188 Low Temperature < 0.1dB additional loss 0.75dB maximum insertion loss NOTE: Multimode tests performed at 850 and 1300nm. 3mm Boot 900m Boot 2.36 2.04 59.94 51.81 *ST is a registered trademark of Lucent Technologies. Dimensions are in inches (Dimensions in brackets are in millimeters) For a copy of PANDUIT product warranties, For a full line catalog (SA-NC10CB01A), email us at log on to www.panduit.com/warranty csteam panduit.com or call Customer Service at 800-777-3300. PANDUIT CORP. Tinley Park, Illinois 60477-3091 Contact your local authorized PANDUIT Customer Service: 800-777-3300 distributor for pricing. For your local Technical Support: 866-405-6654 Email: ncginfo panduit.com Sales Office call 800-777-3300 NETWORK CONNECTIVITY GROUP Website: www.panduit.com/ncg PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT ASIA PACIFIC PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Jalisco, Mexico Victoria, Australia Phone: 800-777-3300 Phone: 44 208-601-7200 Phone: (65) 6379 6700 Phone: (81) (3) 3767-7011 Phone: (52) (333) 666-2501 Phone: (61) 3-9794 9020 WW-FBSP04 PANDUIT Corp. 2003 ALL RIGHTS RESERVED Printed in U.S.A. 07/2003 WORLDWIDE SUBSIDIARIES AND SALES OFFICES