STRUCTUREDGROUND Grounding System Kits for 2 Post Racks SPECIFICATION SHEET specifications Structured rack grounding kits shall be TIA-942 compliant, listed Common Bonding Network for their purpose with a nationally recognized testing laboratory, (CBN) Jumper Kit and RoHS compliant. Grounding strip and connectors shall be tin Factory terminated on plated. Grounding strip shall comply with EIA universal mounting one end, 60 (1.52m) L, hole spacing and mount to standard 19 inch and 23 inch racks. All 2 6 AWG (16mm ), 6 2 2 components shall be bonded to the rails with paint piercing AWG (16 35mm ) HTAP: RGCBNJ660P22 hardware. Electrostatic discharge (ESD) ports shall be mounted to Grounding Strip Kits the front and back of the rack. Equipment shall be bonded to the grounding strip with a discrete jumper and two-hole long barrel 1 strip: RGS134-1Y compression lugs. There shall be a 6 AWG copper code discrete 10 strips: RGS134-10-1Y jumper that terminates on the mesh common bonding network (MCBN) with a compression HTAP and attaches to the grounding Equipment Jumper Kits strip using a two-hole, long barrel compression lug. The 2 6 AWG (16mm ), factory compression lugs shall meet NEBS Level 3 Criteria and have terminated on both ends inspection windows. All jumpers shall have green-and-yellow 24 (.61m) L, 45 bent: RGEJ624PHY VW-1 rated insulation. Where rack sections bolt together, paint 24 (.61m) L, 90 bent: RGEJ624PFY piercing grounding washers shall be used on both sides, under the 2 6 AWG (16mm ), factory head of the bolt and between the nut and the rack. terminated on one end 57 (1.45m) L, 90 bent: RGEJ657PFY technical information Surge Suppressor Jumper Kit Performance level: TIA-942 Compliant, UL Listed, CSA Certified, RoHS Compliant 2 10 AWG (6mm ), factory terminated on both ends: SSGK-1 Packaging: Common bonding network (CBN) jumper kit is supplied with one copper compression HTAP, thread-forming screws, and antioxidant Electrostatic Discharge (ESD) Port Kit Grounding strip kits are supplied with thread-forming screws, grounding Two-Hole: RGESD2-1 sticker, and antioxidant Paint-Piercing Grounding Washer Kit Equipment jumper kits are supplied with thread-forming screws (3/8 M8 stud hole) and antioxidant 100 washers: RGW-100-1Y Surge suppressor jumper kit is supplied with thread-forming screws Bonding Screws and antioxidant 12 24 x 1/2 : RGTBSG-C ESD port kit is supplied with thread-forming screws, one ESD protection Thread-Forming Screws sticker, and antioxidant 12 24 x 1/2 : RGTS-CY Paint-piercing grounding washer kit is supplied with antioxidant Slotted Copper Compression Lugs (1/2 5/8 12.7 16mm stud key features and benefits hole spacing) 2 6 AWG (16mm ), Engineered to meet TIA-942 Provides a dedicated, low resistance, and visually verifiable straight: LCC6-14JAW-L ground system to maintain system performance, protect 2 6 AWG (16mm ), network equipment, and maximize uptime 45 bent: LCC6-14JAWH-L 2 6 AWG (16mm ), Paint-piercing components Eliminates the need to manually remove paint from the rack, 90 bent: LCC6-14JAWF-L and thread-forming screws saves labor and cost and minimizes metal shavings Related Products Flexible design Can be installed on new and existing 19 inch and 23 inch racks that meet EIA-310-D allows up to 45 rack units to be grounded Standard Racks Complete system of Saves labor and cost by making it easy to select components Aluminum matched components and kits for the particular rack grounding scenario 84 (2.13m) H, 19 (.48m) W, 3 (.08m) D: CMR19X84 47 (1.19m) H, applications 19 (.48m) W, 3 (.08m) D: CMR19X47 84 (2.13m) H, Because data center racks are typically painted between the grounding strip and the rack by 23 (.58m) W, 3 (.08m) D: CMR23X84 and bolted together, electrical continuity removing paint from thread holes and minimizing Steel throughout the rack is not assured. PANDUIT metal shavings. The grounding strip can be 47 (1.19m) H, STRUCTUREDGROUND Grounding System Kits connected to the raised floor or overhead system 19 (.48m) W, 3 (.08m) D: CMR19X84S provide a modular solution for properly grounding ground using the common bonding network (CBN) NETFRAME Rack System racks. Paint-piercing grounding washers are jumper. Network equipment is bonded to the 86 (2.18m) H, available to provide continuity between frame grounding strip using available equipment jumpers 28.4 (.72m) W, 6 (.15m) D:NFR84 members. Thread-forming screws are supplied and paint piercing hardware. Hardware is also available for mounting to with the rack grounding kits to provide a bond cage nut, thru-hole, M5 and M6 rails. For the complete STRUCTUREDGROUND Grounding System offering, refer to www.panduit.com/dcgrounding. Paint-piercing grounding washers are included with PANDUIT Standard and NETFRAME racks. www.panduit.com STRUCTUREDGROUND Grounding System Kits for 2 Post Racks Paint-Piercing Electrostatic Discharge Grounding Washer Kit (ESD) Port Kit Provides a superior bond Bent 45 acts as a hook to between frame members hold ESD wrist strap serrations eliminate the need to scrape paint Grounding Strip Kit Provides a bond between the grounding strip and rack, eliminating the need to scrape paint Equipment Jumper Kit Bonds network equipment to the grounding strip or grounding busbar Surge Suppressor Jumper Kit Bonds power or data line surge suppressor to grounding strip or grounding busbar Common Bonding Network (CBN) Jumper Kit Connects grounding strip or Bonding Screw grounding busbar to MCBN in underfloor and overhead Patent pending, bonds equipment grounding applications and patch panels to the front of the rack WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Jalisco, Mexico Victoria, Australia cs-cdn panduit.com cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6379.6700 Phone: 81.3.3767.7011 Phone: 52.333.777.6000 Phone: 61.3.9794.9020 For a copy of PANDUIT product warranties, log on to www.panduit.com/warranty 2007 PANDUIT Corp. For more information ALL RIGHTS RESERVED. Printed in the U.S.A. Visit us at www.panduit.com SA-PCSP04 Contact Customer Service by email: cs panduit.com Replaces SA-PCSP02 or by phone: 800-777-3300 and reference PCSP04 3/2007