NetFrame Cable Management Rack System SPECIFICATION SHEET specifications NetFrame Rack System Cable management rack shall be constructed of steel 19 or 23 x 7 : NFR84 and capable of mounting as 19 or 23 EIA rack. The vertical channels shall have side and front pass through holes. NetFrame Vertical Cable The vertical channels shall have slots that can accommodate Management Options plastic d-rings, plastic bend radius fingers, and spools to provide 4 x 6 D-ring vertical cable management. The rear of the channel shall have kit (8): NFDR4X6K an unequal flange design that allows access to cables inside Center D-ring the channel. The top of the rack shall have integral waterfalls kit (16): NFCDRK that feed to the front and center of the vertical channels. The Bend radius rack shall be capable of accepting steel, full length, hinged finger kit (8): NFBRFK doors. Rack construction method shall ensure an electrically Fiber slack spool: NFSK bonded structure for ease of grounding. NetFrame Shelves technical information 19 W x 18 D: NFSHLF19X18 19 W x 25 D: NFSHLF19X25 Dimensions: NFR84 (19 ) 86.0 H x 28.4 W x 17.0 D (2183mm x 721mm x 432mm) NFR84 (23 ) 86.0 H x 32.4 W x 17.0 D (2183mm x 823mm x 432mm) NetFrame Accessories Standards: Meets all EIA requirements as defined in EIA-310-D Hinged metal door (4 x 7 ): NFD484 (8 x 7 ): NFD884 Packaging: Packaged with two vertical channels, top and bottom brackets, (12 x 7 ): NFD1284 assembly hardware that bonds the rack and installation instructions Ladder rack bracket: NFLRB End panel: NFEP key features and benefits Slack manager: NFVSM4 Modular system Multiple vertical cable management options install easily and allow user to configure system to their preferences Troughs 19 lower with Mounts as 19 or Suitable for a variety of applications 1.3 bend radius: CMLT19 23 EIA rack 19 upper: CMUT19 Rack space identification Allows for quick and easy location of rack spaces, 19 lower: CMT4 speeding installation of horizontal rack mount items (numbered at every Power Strips 19 Horizontal fifth position) 15 A: CMRPSH15 Fully bonded structure Two hole lug attachment simplifies grounding to assure 20 A: CMRPSH20 proper grounding technique 1500 lb. load rating Accommodates large networking equipment Power Strips 19 Vertical 39 single circuit: CMRPSV20 Deep vertical channel Provides pathway for distribution cable 66 dual circuit: CMRPSVD20 Open rear channel Provides easy access to cables inside of vertical channel simplifying moves, adds, and changes Optional hinged metal door Provides easy access to vertical pathway without having to completely remove door Integral waterfalls Provides bend radius control for cables as they go to the front and inside of the vertical channels Pass through holes Located on front and side to allow access from the patching surface to the back of equipment as well as between racks applications The NetFrame Cable Management This modular rack system is compatible with Rack System is designed to support the Panduit horizontal cable management heavy networking equipment and can panels, including the NetManager Cable be used in cross-connect and interconnect Manager, PatchLink , and Open-Access applications in a telecommunications room. D-ring options, Opticom Fiber Optic The NetFrame System is completely Enclosures, and Mini-Com Patch Panels. modular and can manage high performance copper and fiber patch cables. www.panduit.com NetFrame Cable Management Rack System 5 6 3b 4 1 2 3a NFR84 NetFrame 19 HINGED DOORS NFEP End Panel 4 1 Equipment Rack, 45 RU NFD884 Dual Hinge, 3a 8 wide for use in covering NFLRB Ladder Rack 5 two adjacent pathways NFBRFK Vertical Cable 2 Support Bracket, for Management, kit of (8) bend parallel and perpendicular radius fingers attachment of ladder rack NFD484 Single Hinge, 3b 4 wide NCMHAEF4 6 Cable Pathway WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia cs-cdn panduit.com cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2013 Panduit Corp. ALL RIGHTS RESERVED. Visit us at www.panduit.com RKSP128--WW-ENG Contact Customer Service by email: cs panduit.com Replaces WW-RKSP01 4/2013 or by phone: 800.777.3300