TX7000 Shielded Copper Cable for Harsh Environments S/FTP SPECIFICATION SHEET specifications TX6A 10Gig Shielded Category 7 cable shall meet or exceed the IEC 61156-5 Category 7 component standard and be characterized to 1000 MHz. Copper Cabling System The conductors shall be stranded copper wire construction with polyethylene insulation. The copper conductors shall be twisted in TX7000 S/FTP Copper Cable pairs each surrounded by a foil, covered with an overall braided LSZH: PSM7004* shield within an oil- and fuel-resistant, low smoke zero halogen (LSZH) jacket for use in harsh environment applications. Mini-Com TX6A 10Gig Shielded Jack Module technical information Jack module: CJS6X88TGY Electrical Certified channel performance in a 4-connector configuration up to 100 meters and performance: exceeds the requirements of ISO 11801 Class E and ANSI/TIA-568-C.2 Category A TX6A 10Gig Shielded 6A standards for supporting 10GBASE-T transmission over twisted-pair cabling CM/LSZH Patch Cords systems as part of the Panduit TX6A 10Gig Shielded Copper Cabling System Feet: STP6X**IG Certified component performance up to 100 meters and meets or exceeds the Meters: STP6X***MIG component requirement of the IEC 61156-5 Category 7 standard at swept frequencies up to 600 MHz Mini-Com All Metal Shielded Conductors/ Stranded copper wire insulated with polyethylene Angled Modular Patch Panels insulators: 24-port, 1 RU: CPA24BLY Standards EN 50173-1, EN 50288-4-1, ISO/IEC 11801, IEC 61156-5, 48-port, 2 RU: CPA48BLY compliance: DNV specification number 6-827.50-2, IEC 60092-360 Mini-Com All Metal Shielded Certifications: DNV certification number E-10447, ABS certification number 10-HS638424-1-PDA Flat Modular Patch Panels Flame rating: IEC 60754-1, IEC 60754-2, IEC 61034-2, IEC 60332-3-24 24-port, 1 RU: CPA24BLY PoE compliance: Meets IEEE 802.3af and IEEE 802.3at for PoE applications 48-port, 2 RU: CPA48BLY 72-port, 2 RU: CPA72BLY Chemical Mineral oil IRM 902 (IEC 60811-2-1) 7 days/23C (73F) 4 hours/70C (158F) resistance: Diesel fuel IRM 903 (IEC 60811-2-1) 7 days/23C (73F) 4 hours/70C (158F) Cable Prep Tools Installation tension: 100 N maximum (22 lbf) Wire snipping tool: CWST Temperature rating: -15C to 50C during installation (5F to 122F) -40C to 85C during operation (-40F to 185F) Wire stripping tool: CJAST Cable jacket: Oil- and fuel-resistant low smoke zero halogen (LSZH) (IEC 60332-3c),SHF2 Cable diameter: 7.9mm (0.314 in.) nominal *Cable color is IG (International Gray) and/or BU (Blue). For other cable colors please Cable weight: 38 kg/500 m (84 lbs./500 m) contact customer service. **For lengths 3 to 20 feet (increments of Packaging: 500 or 1000 meters (1640 or 3280 feet) on a reel one foot) and 25, 30, 35, 40 feet, change Package tested to ISTA Procedure 1A or 1B the length designation in the part number to desired length. For standard cable colors other than IG (International Gray) substitute key features and benefits IG suffix with Bl (Black), BU (Blue), GR (Green), RD (Red), YL (Yellow), 23 AWG stranded Provides exceptional signal strength and electrical performance for high OR (Orange), or VL (Violet) to the end conductor wire vibration environments of the part number. For example the part number for a blue, 15-foot patch cord Individually foiled Foil prevents coupling near-end crosstalk and alien crosstalk between pairs is STP6X15BU. pairs with overall while shield reduces low-frequency external interference to ensure braided shield 10GBASE-T performance ***For lengths 1 to 10 meters (increments of one meter) and 1.5, 2.5, 15, 20 meters, Robust jacketing Oil- and fuel-resistant for harsh environments change the length designation in the part number to the desired length. For standard Guaranteed channel Industry leading guaranteed channel performance above the TIA/ISO standards cable colors other than IG (International performance above with headroom warranty Gray) substitute IG suffix with BL (Black) the standards BU (Blue), GR (Green), RD (Red), YL (Yellow), OR (Orange), or VL (Violet) Tested beyond Cable has been characterized to 1000 MHz, 400 MHz above the standard to the end of the part number. For example, the standards the part number for a blue, 15-meter patch cord is STP6X15MBU. Descending length Easy identification of remaining cable reduces installation time and cable scrap Contact customer service for bulk packaged cable markings and/or keyed jack modules and patch cords. Bulk packaging Supplied in reels for ease of installation Third party tested Exceeds the application requirements of Det Norske Veritas, American Bureau of Shipping, and ETL applications TX7000 Shielded Copper Cable is a component oil-resistant jacket used in the TX7000 S/FTP of the TX6A 10Gig Shielded Copper Cabling Shielded Copper Cable makes it the ideal choice System. This end-to-end system provides a for use in harsh environments. The use of shielding cost-effective media for ensuring that the most in the cable offers superior performance in uncertain challenging network bandwidth needs are easily high EMI environments for ultimate signal integrity. met today and tomorrow. The durable flame- and www.panduit.com TX7000 Shielded Copper Cable for Harsh Environments S/FTP additional specifications Mechanical Test Ultimate Breaking Strength >400 N (90 lbf) Minimum Bend Radius 8 x cable diameter Electrical Test Nominal Velocity of Propagation (NVP) 76% nominal cable construction Stranded Conductor Insulator Conductor Wire Foil Shield Jacket Overall Braid product offering Part Number Packaging Configuration Reel Size PSM7004*-KED Standard Euro Pallet 500m (12 reels/pallet) PSM7004*-KD Standard Pallet 500m (12 reels/pallet) PSM7004*-KM Standard Pallet 1000m (4 reels/pallet) PSM7004*-KEM Standard Euro Pallet 1000m (4 reels/pallet) *Cable color is IG (International Gray) or BU (Blue). For other cable colors, please contact customer service. WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia cs-cdn panduit.com cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2013 Panduit Corp. Visit us at www.panduit.com ALL RIGHTS RESERVED. Contact Customer Service by email: cs panduit.com COSP304--WW-ENG or by phone: 800.777.3300 4/2013