TX6 U/UTP Outside Plant (OSP) Copper Cable - North America and Middle East SPECIFICA TION SHEET specifications TX6 U/UTP Copper Category 6 OSP cable shall meet the ANSI/TIA-568-C.2 Cabling System and IEC 61156-5 Category 6 component standards. The conductors shall be 23 AWG construction with polyolefin TX6 UTP Copper Cable insulation. The cable shall have a gel-filled construction OSP: PUO6C04BL-U to prevent moisture migration in underground and wet applications and a wide temperature range for extreme Mini-Com TX6 PLUS UTP weather environments. The copper conductors shall be Jack Module twisted in pairs, separated by a pair separator and Jack module: CJ688TGIW* covered with a UV-resistant and abrasion-resistant polyethylene (PE) jacket. Product is to be used in duct TX6 PLUS UTP Patch Cords CM and conduit installations only. Not to be used in aerial Foot lengths: UTPSP3 Y or direct burial applications. Meter lengths: UTPSP1 MY DP6 PLUS Punchdown technical information Patch Panels Electrical performance: Certified channel performance in a 4-connector configuration up Angled, 24-port, to 100 meters and exceeds ANSI/TIA-568-C.2 Category 6 and 1RU: DPA24688TGY ISO 11801 Class E standards at swept frequencies up to 250 MHz Angled, 48-port, Certified component performance up to 100 meters and 2RU: DPA48688TGY exceeds the component requirements of ANSI/TIA-568-C.2 Flat, 12-port: DP12688TGY and IEC 61156-5 Category 6 component standards at swept Flat, 24-port, frequencies up to 250 MHz 1 RU: DP24688TGY Conductors/insulators: 23 AWG solid copper insulated with polyolefin Flat, 48-port, 2 RU: DP48688TGY Insulation diameter: .040 in. - .044 in. (1.02mm - 1.12mm) Mini-Com Flush Mount Modular Standards compliance: ANSI/TIA-568-C.2 Category 6 and ISO 11801 Class E Telcordia Patch Panels Specification GR-421-CORE Water Penetration Requirement Angled, 24-port, Standards compliance: UL Listed CMP-LP 0.7A and CMR-LP 0.5A 1RU: CPPA24FMWBLY Installation tension: 25 lbf (110 N) maximum Angled, 48-port, 2RU: CPPA48FMWBLY Temperature rating: -22F to 140F (-30C to 60C) during installation Flat, 24-port, -49F to 176F (-45C to 80C) during operation 1 RU: CPP24FMWBLY Cable jacket: Black UV-resistant and abrasion-resistant polyethylene (PE) Flat, 48-port, Cable diameter: 0.260 in (6.6mm) nominal 2 RU: CPP48FMWBLY Cable weight: 25 lbs./1000 ft. (11 kg/305m) Termination and Cable Prep Tools Packaging: 1000 ft. (305m) on a reel Termination tools: EGJT or TGJT Conductor key features and benefits snipping tool: CWST Robust design Protects against environmental elements that can Conductor cause electrical performance failures stripping tool: CJAST Flooding compound Waterproof gel prevents moisture migration *To designate a color, add suffix IW (Off White), EI Reel Ensures proper performance and provides quick installation (Electric Ivory), IG (International Gray), WH (White), BL (Black), OR (Orange), RD (Red), BU (Blue), GR Descending length Easy identification of remaining cable reduces installation time and (Green), YL (Yellow), or VL (Violet). cable markings: cable scrap For lengths 1 to 20 feet (increments of one foot) and 25, 30, 35, 40 feet, change the length designation in part number to the desired length. For standard cable colors other than Off White, add suffix BL (Black), BU (Blue), applications GR (Green), RD (Red), YL (Yellow), OR (Orange), or VL (Violet) before Y at the end of the part number. For TM example, the part number for a blue, 15-foot patch cord TX6 U/UTP OSP Copper Cable is a Category 6 standard, this system will support is UTPSP15BUY. TM component of the Panduit TX6 UTP Copper the following applications: For lengths 1 to 10 meters (increments of one meter) Cabling System. This end-to-end system Ethernet 10BASE-T and 0.5, 1.5, 2.5, 15, 20 meters, change the length designation in the part number to the desired length. provides Gigabit Ethernet performance with 100BASE-T (Fast Ethernet) For standard cable colors other than Off White, add usable bandwidth beyond 250 MHz. With 1000BASE-T (Gigabit Ethernet) suffix BL (Black), BU (Blue), RD (Red), YL (Yellow), GR certified performance to the ANSI/TIA-568-C.2 (Green), OR (Orange), or VL (Violet) before Y at the end of the part number. For example, the part number for a blue, 5-meter patch cord is UTPSP5MBUY. PRODUCT IS TO BE USED IN DUCT AND CONDUIT INSTALLATIONS ONLY. NOT TO BE USED IN AERIAL OR DIRECT BURIAL APPLICATIONS. www.panduit.com TX6 U/UTP Outside Plant (OSP) Copper Cable - North America, Middle East additional specification Mechanical Test Ultimate Breaking Strength >90 lbf (400 N) Minimum Bend Radius 4 x Cable Diameter Electrical Test Nominal Velocity of Propagation (NVP) 69% nominal cable construction Jacket Conductor Wire Flooding Compound Cross-divider Conductor Insulator WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia cs-cdn panduit.com cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2018 Panduit Corp. Visit us at www.panduit.com ALL RIGHTS RESERVED. Contact Customer Service by email: cs panduit.com COSP303--WW-ENG or by phone: 800.777.3300 7/2018