TX6000 UTP Copper Cable SPECIFICATION SHEET specifications TX6000 UTP Copper Cabling System Category 6 cable shall exceed ANSI/TIA-568-C.2 and IEC 61156-5 Category 6 component standards. The conductors TX6000 UTP Copper Cable shall be 23 AWG construction with FEP (CMP) or polyolefin (CMR) insulation. The copper conductors shall be twisted in Plenum: PUP6004*-W pairs, separated by a cross-divider and covered by a low Riser: PUR6004*-W smoke, flame-retardant (CMP) jacket or a Mini-Com TX6 PLUS UTP flame-retardant (CMR) jacket. Jack Module Jack module: CJ688TG** TX6 PLUS UTP Patch Cords technical information Foot lengths: UTPSP3***Y Electrical Certified channel performance in a 4-connector configuration up to 100 Meter lengths: UTPSP1M Y performance: meters and exceeds ANSI/TIA-568-C.2 Category 6 and ISO 11801 DP6 PLUS Angled Punchdown Class E standards at swept frequencies up to 250 MHz Patch Panels Certified component performance up to 100 meters and exceeds the 24-port, 1 RU: DPA24688TGY component requirements of ANSI/TIA-568-C.2 and IEC 61156-5 48-port, 2 RU: DPA48688TGY Category 6 component standards at swept frequencies up to 250 MHz DP6 PLUS Flat Punchdown Conductors/ Plenum 23 AWG bare copper wire covered by FEP insulation Patch Panels insulators: Riser 23 AWG bare copper wire covered by polyolefin insulation 12-port: DP12688TGY Flame rating: Plenum NFPA 262 and CSA FT-6 24-port, 1 RU: DP24688TGY Riser UL1666 and CSA FT-4 48-port, 2 RU: DP48688TGY PoE compliance: Meets IEEE 802.3af and IEEE 802.3at for PoE applications GP6 PLUS Category 6 Installation tension: 25 lbf (110 N) maximum Punchdown System Temperature rating: 32F to 122F (0C to 50C) during installation See website (www.panduit.com) or catalog -4F to 140F (-20C to 60C) during operation (Plenum) for complete system information. -4F to 167F (-20C to 75C) during operation (Riser) Cable Prep Tools Cable jacket: Plenum low smoke, flame-retardant PVC Wire snipping tool: CWST Riser flame-retardant PVC Wire stripping tool: CJAST Cable diameter: Plenum 0.233 in. (5.9mm) nominal Riser 0.231 in. (5.8mm) nominal *To designate a color, add suffix BU (Blue), Cable weight: Plenum 29 lbs./1000 ft. (13.2 kg/305m) WH (White), YL (Yellow), IG (International Gray), BL (Black), RD (Red), GR (Green), OR (Orange), Riser 25 lbs./1000 ft. (11.4 kg/305m) or VL (Violet). Packaging: 1000 ft. (305m), easy payout carton **To designate color, add suffix IW (Off White), Package tested to ISTA Procedure 1A EI (Electric Ivory), IG (International Gray), WH (White), BL (Black), OR (Orange), RD (Red), BU (Blue), GR (Green), YL (Yellow), or VL (Violet). key features and benefits ***For lengths 1 to 20 feet (increments of one foot) and 25, 30, 35, 40 feet, change the length Third party tested Cable has been tested as part of the TX6000 Copper Cabling designation in part number to the desired System by an independent laboratory and complies with the electrical length. For standard cable colors other than Off White, add suffix BL (Black), BU (Blue), channel requirements of the following standard: ANSI/TIA-568-C.2 GR (Green), RD (Red), YL (Yellow), Category 6 OR (Orange), or VL (Violet) before Y at the Integrated pair divider Separates pairs for exceptional cable performance end of the part number. For example, the part number for a blue, 15-foot patch cord Easy payout carton Ensures proper performance and provides quick installation is UTPSP15BUY. Tested beyond the standards Cable has been characterized to 550 MHz, 300 MHz above For lengths 1 to 10 meters (increments of one the standard meter) and 0.5, 1.5, 2.5, 15, 20 meters, change the length designation in the part number to Descending length Easy identification of remaining cable reduces installation the desired length. For standard cable colors cable markings time and cable scrap other than Off White, add suffix BL (Black), BU (Blue), RD (Red), YL (Yellow), GR (Green), OR (Orange), or VL (Violet) before Y at the end of the part number. For example, the applications part number for a blue, 5-meter patch cord is UTPSP5MBUY. TX6000 UTP Copper Cable is a component of the Panduit TX6000 UTP Copper Cabling System. Interoperable and backward compatible, this end-to-end system provides design flexibility to protect network investments well into the future. With certified performance to the ANSI/TIA-568-C.2 Category 6 and ISO 11801 Class E standards, this system will support the following applications: Ethernet 10BASE-T, 100BASE-T (Fast Ethernet), 1000BASE-T (Gigabit Ethernet), 10GBASE-T (10 Gigabit Ethernet over limited distances as specified in the industry 10GBASE-T standards) 155 Mb/s ATM, 622 Mb/s ATM, 1.2 Gb/s ATM Token Ring 4/16 www.panduit.com TX6000 UTP Copper Cable additional specifications Mechanical Test >90 lbf (400 N) Ultimate Breaking Strength Minimum Bend Radius 4 x cable diameter Electrical Test Nominal Velocity of Propagation (NVP) CMR 69%, CMP 72% cable construction Jacket Conductor Wire Cross-divider Conductor Insulator WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia cs-cdn panduit.com cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2012 Panduit Corp. Visit us at www.panduit.com ALL RIGHTS RESERVED. Contact Customer Service by email: cs panduit.com COSP226--WW-ENG or by phone: 800-777-3300 and reference COSP226 9/2012