PanView iQ Interconnect Patch Cords SPECIFICATION SHEET specifications Category 6/Class E UTP interconnect patch cords shall be constructed of 24 AWG twisted pair stranded copper cable with the addition of a 26 PanView iQ Interconnect AWG ninth conductor. The patch cords shall be Patch Cords CM Rated terminated with a shielded modular plug on one end, with a nine wire modular plug on the opposite Foot lengths: PVQ-BIU6C3BU* end. Patch cords shall be used in conjunction Meter lengths: PVQ-BIU6C1MBU** with intelligent patch panels and shall be used PanView iQ Interconnect exclusively for interconnect architectures. Patch Cords LSZH Rated Meter lengths: PVQ-BIU6L1MBU PanView iQ Patch Panels technical information Modular, intelligent, blank 24-port Electrical performance: Meets channel and component requirements of Flat unshielded: PVQ-MIQPU24 ANSI/TIA/EIA-568-B.2-1 Category 6 and ISO 11801 2nd Edition Angled unshielded: PVQ-MIQAPU24 Class E ratified standards at swept frequencies up to 250 MHz Flat shielded: PVQ-MIQPS24 Angled shielded: PVQ-MIQAPS24 FCC compliance: Meets ANSI/TIA-968-A contacts plated with 50 microinches of gold for superior performance PanView iQ Intelligence Modules IEC compliance: Meets IEC 60603-7 Panel manager (PM): PVQ-PM UL rated: Meets UL 1863 Expansion PoE compliance: Meets draft requirements of IEEE 802.3at for PoE Plus module (EM): PVQ-EM NOTE: PM requires PanView iQ Power Supply (not included). key features and benefits PanView iQ Power Supply 12 volt Switch/server Communicates connection status between switch/server power supply port detection with PanView iQ Patch Panels without network protocol (North America): PVQ-PS12VDC-S 100% performance tested Assurance that each patch cord will deliver the critical (Europe): PVQ-PS12VDC-E electrical performance requirements (UK): PVQ-PS12VDC-U (Japan): PVQ-PS12VDC-J Integral pair manager Optimizes performance and consistency by reducing NOTE: Power supplies are also available for untwist at the plug Europe (-E) and the U.K (-U). Slender strain relief boot Provides easy access in high-density applications PIM Software Platform and Modules Patented tangle free latch Prevents snags and provides easy release, saving time on Base functionality frequent moves, adds, and changes module: PIM-BASE Connectivity Ninth conductor continuity Provides continuity through the patch cord enabling the management PanView iQ System to monitor connectivity without module: PIM-CONNECT interfering with Ethernet performance Maintenance, support and warranty Variety of cable colors Meets individual length and color-coding requirements for agreement: PIM-CAMA and lengths greater system flexibility Software and documentation: PIMS-MEDIA applications *For standard lengths other than 3 feet (5, 7, 10, 14 or 20) change the length designation in part number to the desired length. For standard cable Panduits PViQ System Hardware, which may be upgraded to fully managed at a future colors other than BU (Blue) replace suffix BU includes intelligent patch panels, modules and time. PViQ Interconnect Patch Cords enable with GR (Green) at the end of the part number. For example, the part number for a green 10-foot cabling, seamlessly feeds information directly intelligent physical infrastructure management for CM patch cord is PVQ-BIU6C10GR. into the Physical Infrastructure Manager (PIM ) interconnect architectures by verifying switch **For standard lengths other than 1 meter (2, 3, port connection and communicating with the Software Platform to provide continuous 5, or 10) change the length designation in part real-time patch field monitoring and visibility of system software, to allow improved network number to the desired length. For standard cable colors other than BU (Blue) replace suffix BU physical infrastructure connectivity for enhanced visibility. Interconnect patch cords can reduce with GR (Green) at the end of the part number. system reliability and security and capacity patch panel requirements by 50% over For example, the part number for a green 10-meter CM patch cord is PVQ-BIU6C10MGR. management. PViQ Patch Panels support cross-connect designs, reducing installation and deployment costs. For standard lengths other than 1 meter (2, 3, 5, tiered installations to provide customer with the or 10) change the length designation in part flexibility of installing passive connectivity that number to the desired length. For standard cable colors other than BU (Blue), replace suffix BU with WH (White) at the end of the part number. For example, the part number for a white 10-meter, LSZH patch cord is PVQ-BIU6L10MWH. www.panduit.com PanView iQ Interconnect Patch Cords Twist Tie Twist Tie Identification Label 2.000.50 Strain Relief Boot Category 6 Shielded Plug Connection for 9th Wire Plug Position T568B Wiring Scheme Plug Position Cable Wire 1 White/Orange 2 Orange 3 White/Green 4 Blue 5 White/Blue 6 Green 7 White/Brown 8 Brown WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia cs-cdn panduit.com cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2010 Panduit Corp. Visit us at www.panduit.com ALL RIGHTS RESERVED. Contact Customer Service by email: cs panduit.com WW-PVSP32 or by phone: 800.777.3300 and reference PVSP32 10/2010