T400X000Y01 Panduit

18900 Panduit Drive TDS: GMY4-HT* Tinley Park, IL 60487 Effective Date: 03FEB16 Customer Service: 800-777-3300 Revision: 10 Technical Data Sheet High Tack Thermal Transfer Printable Polyester Film This specification is intended to outline the physical and chemical properties of PANDUITs pressure sensitive high tack thermal transfer printable polyester material and include the following printable material identifiers: Printable Material Suffixes YPT YQT-P YUT-P Y9T-P YPT-P YRT-P YVT-P Y*1 Y0T YST-P YWT-P AJC (Flag Label) Y0T-P YTT-P Y8T-P AJT (Flag Label) YPC A*1 PRODUCT SPECIFICATIONS: Description: Material is RoHS compliant (European Union directive 2002/95/EC). Material is a top coated polyester film with a pressure sensitive adhesive. Print Methods: This material is recommended for thermal transfer printing. Adhesive: Rubber based, pressure sensitive high tack permanent adhesive Standard Colors: Various colors Thickness: 3.9 +/- 0.3 mils (substrate and adhesive) Service Temperature Range: -40F to 302F (-40C to 150C) Minimum Application Temperature: 50F (10C) Storage Conditions: Store at 70F (21C) and 50% Relative Humidity. PROPERTIES: PERFORMANCE: Peel Adhesion to Stainless Steel: 100 oz/in width minimum (PSTC-101, 15 min. dwell) Shear Adhesion: 24 hours minimum (PSTC-107, modified Procedure A) Tensile Strength: MD 36 +/- 3.6 lbs./inch width (PSTC-131) TD 41 +/- 4.1 lbs./inch width (PSTC-131) MD 80% +/- 15% (PSTC-131) Elongation: TD 75% +/- 15% (PSTC-131) UV Resistance: *3000 hours no change observed (ASTM G154) Elevated Temperature Exposure: After 8 hours at 150F (65.5C) there was no deterioration of the substrate *3000 hours equates to 5 years of assimilated outdoor UV exposure. Page 1 of 4 2006 PANDUIT Corp TDS: GMY4-HT* 18900 Panduit Drive TDS: GMY4-HT* Tinley Park, IL 60487 Effective Date: 03FEB16 Customer Service: 800-777-3300 Revision: 10 Technical Data Sheet PROPERTIES FOR SOLAR PERFORMANCE: APPLICATION: Short term low temperature exposure: 30 days at -51C, no visible change observed Short term high temperature exposure: 30 days at 93C, no visible change observed Relative Lightfastness and weatherability: 1000 hours, no change observed (ASTM D3424, Method 4) Tensile Strength: MD: 10114 PSI (ASTM D3759) Elongation: MD: 90% (ASTM D3759) Tack: 12.6 N (ASTM D2979) Flammability: 16 seconds (ASTM D1000) Adhesion: 154.0 oz/in (ASTM D3330) CHEMICAL/SOLVENT RESISTANCE: The testing was conducted at room temperature. Samples were orange/red (flexo) preprinted and thermal transfer printed with Panduit RMR*BL/RMER*BL ribbon on the Panduit TDP43MY/TDP43ME printer. Separate sets were conditioned for 24 hours before being immersed in the following solvents for a period of 1 hour and 24 hours. After the samples were removed from the immersed solvents, they were rubbed 10 times with a lint free gauze. Visual observations were noted for any smear or loss of legibility. 1 Hour Immersion Visual Observation Chemical/Solvent Ribbon only Colored Flexo Ink Jet Fuel No change No change Gasoline Loss in print density No change Methyl Ethyl Loss in print density Orange/red ink removed Ketone 1:1:1 TCE Loss in print density Orange ink removed Trichloroethylene Loss in print legibility Orange/red ink removed 409 Cleaner No change No change Alpha Flux 200L No change No change 24 Hours Immersion Visual Observation Chemical/Solvent Ribbon only Colored Flexo Ink Isopropyl Alcohol No change Orange ink removed No change No change Water 150 F Salt Water No change No change SAE 30 Motor Oil No change No change Hydraulic Fluid No change No change Skydrol Loss in print legibility Orange ink removed Methanol/Water No change No change Page 2 of 4 2006 PANDUIT Corp TDS: GMY4-HT*