PEC3124C2A-AU ESD Protection Voltage 24 V SOT-23 Unit: inch(mm) Features Bidirectional ESD protection IEC61000-4-2(ESD): 20kV Air, 18kV Contact IEC61000-4-4(EFT): 40A(5/50nS) IEC61000-4-5(Lightning): 3A(8/20 S) Low leakage current, maximum of 0.05 A at rated voltage AEC-Q101 qualified Lead free in compliance with EU RoHS 2.0 Green molding compound as per IEC 61249 standard Mechanical Data Case: SOT-23, Plastic Terminals: Solderable per MIL-STD-750, Method 2026 Approx. Weight: 0.0003 ounces, 0.0084 grams Applications (TOP VIEW) FIG.170 CAN bus protection Automotive applications Maximum Ratings PARAMETER SYMBOL VALUE UNITS ESD IEC61000-4-2(Air) 20 V kV ESD ESD IEC61000-4-2(Contact) 18 o Operating Junction Temperature Range T -55 to +150 C J o Storage Temperature Range T -55 to +150 C STG September 21,2017-REV.01 Page 1 PEC3124C2A-AU Electrical Characteristics PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNITS (Note 1) Reverse Stand-Off Voltage V - - - 24 V RWM Reverse Breakdown Voltage V I =5mA 25.4 - 30.3 V BR R Reverse Leakage Current I V =24V - - 50 nA R R I =1A, t =8/20 s - - 40 V PP P Clamping Voltage V CL I =3A, t =8/20 s - - 60 V PP P I =4A, t =100ns - 34.5 - V PP P (Note 2) Clamping Voltage TLP V CL I =8A, t =100ns - 38 - V PP P Dynamic Resistance R t =100ns - 0.88 - DYN P Off State Junction Capacitance C 0Vdc Bias f=1MHz - 11 15 pF J Note : 1.A transient suppressor is selected according to the working peak reverse voltage(V ), which RWM should be equal to or greater than the DC or continuous peak operation voltage level. 2.Testing using Transmission Line Pulse (TLP) conditions: Z0 = 50 , t = 100 ns. P September 21,2017-REV.01 Page 2