SPECIFICATIONS General Specifications Model NHL-3FV1N-RYG Rated Voltage 24V DC Rated Voltage 10% Operating Voltage Range Rated Power Typ. 1.7W Consumption 7.7W Max. Operating Ambient Temperature 0 to +40 Operating Ambient Humidity 20-80% (No condensation) -10 to +60 Storage Ambient Temperature Storage Ambient Humidity 20-80% (No condensation) Indoors Mounting Location Mounting Direction Upright Protection Rating IP20(IEC 60529) Vibration Resistance 19.6m/s (IEC 60068-2-6) Mass (Tolerance 10%) 1.15kg (not including accessories) Refer to the Outer Dimension Drawing Outer Dimensions Conformity Standards FCC Part15 SubpartB Class A UL1638,UL 464, CSA-C22.2 No. 205 EMC directive (EN 55032 (ClassA), EN 55024), RoHS Directive (EN50581) Conforms to the CE Requirements EthernetConforms to the IEEE 802.3 Communication Method Physical Layer 10BASE-T/100BASE-TXAuto-negotiation Full Duplex/Half Duplex) Data Link Layer CSMA/CD Network Layer IPARPICMP Transport Layer TCPUDP Application Layer HTTPSNMP(V1,V2c)RSHSMTPNTP POP3 DNSSocket(PHNPNS)DHCPSLMP Interface USB Port USB2.0/1.1 TYPE-A 1ch RS232C mini DIN(Used for expanding additonal functions) Serial Port External Contact Output Non-voltage contact output 1 Number of Contacts Wire Diameter Solid Wire/Stranded Wire: 0.41-0.81mm AWG26-20 Wiring Method Screwless terminal block External Contact Input Non-voltage Contact Number of Contacts 4 NPN Transistor Transistor Input OutputO current 6mA or less per channel. Contact Capacity Terminal OFF condition Voltage: 24V Solid Wire/Stranded Wire: 0.41-0.81mm AWG26-20 Wire Diameter Wiring Method Screwless terminal block 110msec or more Input Reaction Time Operation Part Volume,Reset Switch,Clear Switch,Mode Switch,Test Switch Accessory Setting Manual,Rubber Feet Wallmount Bracket(NH-WST2) Optional Parts Remarks To retain the UL certification for the main unit, it is required to use an AC adaptor with UL Listing. No.NHL-3FV1N- W18C-1 4Sound Pressure Level 88dB or more Environmental Front direction from the center/at 1m(1kHz sine wave played back at -6dB) Condition MP3 data of the content and use of the environment, the sound pressure level will change. Audio Line Output 600 0dBv(Unbalanced,Monaural Mini-Jack) Audio File Format MPEG1-Audio Layer (MP3) Sampling Frequency 44.1kHz 32kbit/s 64kbit/s Standard Rate 128kbit/s Bit Rate Constant Bit Rate(CBR) only Transferred using a USB memory(Playlist Package):30(Total of up to 10Mbyte) Number of Playback Messages Registration by the Web Setup Tool(MP3 File):30(Total of up to 20Mbyte) Preset:10 Fanctional Specifications LED Lighting Specifications Red,Amber,Green OnO (Continuous Lighting) Flashing Pattern 1O 500ms,OF 500ms (Repetitive)O 80ms,OF 170ms,O 80ms,OF 670ms (Repetitive) Flashing Pattern 2 Preset Sound Buzzer4 Kinds Chime 3 Kinds Message 3 Kinds External Input The status condition of a non-voltage contact input can be detected. The following functions are available at the time of detection. E-mail Transmission,SNMP TRAP Transmission,Contact Output ON/OFF, Control of Signal Tower and Sound and External Output. Condition Setup It is possible to set the operation when conditions meet. Continuation time detection: When the input is detected, it will be activated. External Output Perform an external device control by external contact output at the time of the event or during sound playback BUSY Output ON the external contact output during sound playback Clear Switch When pressing theClea switch, the following operation occurs. E-mail Transmission,SNMP TRAP Transmission,Contact Output ON/OFF, Control of Signal Tower and Sound and External Output. Reset Switch Causes the product to reboot. Test Switch Check the operation of the product Mode Switch Set the mode of operation of the product Volume Setting Volume adjustable at the side of the product analog volume Volume settings and mute setting is possible with the Web Setup tool TRAP Transmission SNMP TRAP is transmitted at the time an event occurs (V2C). TRAP Reception The following operations occur at the time of an SNMP TRAP reception (V1, V2C): E-mail Transmission,SNMP TRAP Transmission,Contact Output ON/OFF,Control of Signal Tower and Sound and External Output. E-mail is transmitted at the time an event occurs (up to 8 addresses). E-mail Transmission rsh Command Reception The rsh command from an external instrument is received and contact status is acquisitioned,and Control of Signal Tower and sound and external contact output Socket Reception A PNS Command and PHN Command are received and contact status is acquisitioned,and Control of Signal Tower and sound and external contact output No.NHL-3FV1N- W18C-2 4