Diffuse mode sensor ML100-8-1000-RT/95/103 Dimensions 20 11 3 Receiver Emitter 10.6 Model Number M8 x 1 ML100-8-1000-RT/95/103 Electrical connection Diffuse mode sensor with 4-pin, M8 x 1 connector Option: 103 1 +UB Features Miniature design 2 Easy to use Q Very bright, highly visible light spot Full metal thread mounting 3 0 V Highly visible LEDs for Power ON and switching state 4 Q Not sensitive to ambient light Product information = Light on = Dark on The ML100 series is characterized by its miniature housing with integral, all-metal Pinout threaded bushings. All versions are equip- ped with a visible red transmitter LED. This greatly simplifies installation and commissio- ning. The switching states are easily visible from all directions thanks to the highly visible 24 LEDs. 13 Indicators/operating means 1 2 4 1 Light-Dark-switching 2 Sensitivity adjuster 3 Signal display yellow 4 Operating display green 3 Subject to modifications without notice Copyright Pepperl+Fuchs Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776-4411 Singapore: +65 6779 9091 1 www.pepperl-fuchs.com fa-info us.pepperl-fuchs.com fa-info pepperl-fuchs.com fa-info sg.pepperl-fuchs.com Release date: 2011-09-16 08:50 Date of issue: 2011-09-16 210537 eng.xml 8.7 12.1 10.6 4.1 M3 2.8 25.4 31 34.2Diffuse mode sensor ML100-8-1000-RT/95/103 Technical data Accessories General specifications OMH-ML100-03 Detection range 0 ... 1000 mm Mounting aid for round steel 12 mm or Adjustment range 100 ... 1000 mm sheet 1.5 mm ... 3 mm Reference target standard white, 100 mm x 100 mm Light source LED OMH-ML100-04 Light type modulated visible red light Mounting bracket Approvals CE, cULus Listed 57M3 (Only in association with UL Class 2 power supply Type 1 enclosure) OMH-ML100-05 Diameter of the light spot approx. 75 mm at a distance of 1000 mm Mounting bracket Angle of divergence approx. 2 Optical face frontal OMH-F10-ML100 Ambient light limit EN 60947-5-2 Mounting aid for ML100 series Functional safety related parameters OMH-10 MTTF 860 a d Mounting aid Mission Time (T ) 20 a M Diagnostic Coverage (DC) 0 % V31-WM-2M-PUR Indicators/operating means 4-pin, M8 socket, PUR cable Operating display LED green: power on Function display LED yellow, lights up with receiver lit V31-GM-2M-PUR Controls sensitivity adjustment 4-pin, M8 socket, PUR cable Controls Light/Dark switch Other suitable accessories can be found at Electrical specifications www.pepperl-fuchs.com Operating voltage U 10 ... 30 V DC , class 2 B Ripple max. 10 % No-load supply current I < 20 mA 0 Output Switching type light/dark on, switchable Signal output 1 PNP output, short-circuit protected, protected from reverse polarity, open collector Switching voltage max. 30 V DC Switching current max. 100 mA , resistive load Voltage drop U 1.5 V DC d Switching frequency f 1000 Hz Response time 0.5 ms Ambient conditions Ambient temperature -30 ... 60 C (-22 ... 140 F) Storage temperature -40 ... 70 C (-40 ... 158 F) Mechanical specifications Protection degree IP67 Connection Male connector M8 x 1 , 4-pin Material Housing PC (Polycarbonate) Optical face PMMA Mass approx. 10 g Compliance with standards and directi- ves Directive conformity EMC Directive 2004/108/EC EN 60947-5-2 Standard conformity Standards UL 508 Approvals and certificates UL approval cULus Listed, Class 2 Power Source, Type 1 enclosure CCC approval Products with a maximum operating voltage of 36 V do not bear a CCC marking because they do not require approval. Subject to modifications without notice Copyright Pepperl+Fuchs Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776-4411 Singapore: +65 6779 9091 2 www.pepperl-fuchs.com fa-info us.pepperl-fuchs.com fa-info pepperl-fuchs.com fa-info sg.pepperl-fuchs.com Release date: 2011-09-16 08:50 Date of issue: 2011-09-16 210537 eng.xml