Ultrasonic sensor UB800-18GM40-E5-V1 Technical data General specifications Sensing range 50 ... 800 mm Adjustment range 70 ... 800 mm Unusable area 0 ... 50 mm Standard target plate 100 mm x 100 mm Transducer frequency approx. 255 kHz Response delay approx. 100 ms Indicators/operating means LED green Power on LED yellow indication of the switching state flashing: program function object detected LED red permanently red: Error red, flashing: program function, object not detected Electrical specifications Operating voltage U 10 ... 30 V DC , ripple 10 % B SS No-load supply current I 20 mA 0 Input Input type 1 program input operating distance 1: -U ... +1 V, operating distance 2: +6 V B ... +U B input impedance: > 4,7 k program pulse: 1 s Model Number Output Output type 1 switch output E5, pnp NO/NC, programmable UB800-18GM40-E5-V1 Rated operational current I 200 mA , short-circuit/overload protected e Default setting Switch point A1: 70 mm Switch point A2: 800 mm Single head system Voltage drop U 3 V d Repeat accuracy 1 % Features Switching frequency f 4 Hz Short design, 40 mm Range hysteresis H 1 % of the set operating distance Temperature influence 1.5 % of full-scale value Function indicators visible from all Ambient conditions directions Ambient temperature -25 ... 70 C (248 ... 343 K) Storage temperature -40 ... 85 C (233 ... 358 K) Switch output Mechanical specifications 5 output modes Protection degree IP67 Connection V1 connector (M12 x 1), 4-pin Program input Material Housing brass, nickel-plated Temperature compensation Transducer epoxy resin/hollow glass sphere mixture foam polyurethane, cover PBT Curves Mass 25 g Compliance with standards and directives Characteristic response curve Standard conformity Standards EN 60947-5-2:2007 Distance Y mm 200 IEC 60947-5-2:2007 150 100 50 2 1 0 -50 -100 -150 -200 0 200 400 600 800 1000 1200 1400 Distance X mm Y X Curve 1: flat surface 100 mm x 100 mm Curve 2: round bar, 25 mm Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany Pepperl+Fuchs Group Tel.: Germany +49 621 776-0 USA +1 330 4253555 Singapore +65 67799091 Internet Ultrasonic sensor UB800-18GM40-E5-V1 Additional Information Dimensions Programmable output modes 1. Window mode, normally open mode A1 < A2: object distance A1 A2 2. Window mode, normally closed mode A2 < A1: A2 A1 3. One switch point, normally open mode A1 -> A2 24 4 4. One switch point, normally closed mode A2 -> : 24.5 LED 39.2 10 A1 50.2 5. A1 -> , A2 -> : Object presence detection mode Object detected: Switch output closed No object detected: Switch output open Accessories UB-PROG2 Programming unit OMH-04 Mounting aid BF 18 Mounting flange Electrical Connection BF 18-F Mounting flange Standard symbol/Connections: (version E5, pnp) BF 5-30 1 (BN) + U B Mounting flange 2 (WH) Teach input U 4 (BK) Switch output V1-G-2M-PVC 3 (BU) - U B Cable connector Core colours in accordance with EN 60947-5-2. V1-W-2M-PUR Cable connector Pinout Connector V1 2 1 3 4 Adjusting the switching points The ultrasonic sensor features a switch output with two teachable switching points. These are set by applying the supply voltage -U or +U to the TEACH-IN input. The B B supply voltage must be applied to the TEACH-IN input for at least 1 s. LEDs indicate whether the sensor has recognised the target during the TEACH-IN procedure. Swit- ching point A1 is taught with -U , A2 with +U . B B Five different output functions can be set 1. Window mode, normally-open function 2. Window mode, normally-closed function 3. one switching point, normally-open function 4. one switching point, normally-closed function 5. Detection of object presence TEACH-IN window mode, normally-open function Set target to near switching point TEACH-IN switching point A1 with -U B Set target to far switching point TEACH-IN switching point A2 with +U B TEACH-IN window mode, normally-closed function Set target to near switching point TEACH-IN switching point A2 with +U B Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany 2 Pepperl+Fuchs Group Tel.: Germany +49 621 776-0 USA +1 330 4253555 Singapore +65 67799091 Internet