0.060 STATFREE T2 DISSIPATIVE RUBBER Specifications Color Dissipative Layer Standard Document Meets Requirements of: ANSI/ESD S20.20 Worksurface Electrical Properties Typical Values Test Procedures/Method Color Dissipative Layer 6 9 Rtt Resistance: 1 x 10 to < 1 x 10 ohms ANSI/ESD S4.1 and ESD TR53 6 9 Rtg Resistance: 1 x 10 to < 1 x 10 ohms ANSI/ESD S4.1 and ESD TR53 More Conductive Black Layer 6 Rtt Resistance: < 1 x 10 ohms ANSI/ESD S4.1 and ESD TR53 Physical Properties Construction: Dual-layer rubber material Thickness: 0.060 (1.5mm) More Conductive Black Layer Color:* Blue (Top), Dark Blue (Top), Dark Grey (Top), Green (Top), Black (Bottom) Texture:* Slight embossed Weight: 0.43 lbs./sq. ft. (0.2g/cm2) 2-Layer Hardness: 65 5 Shore A, per ASTM-D2240 Other Properties Heat Resistance: Does not melt or burn when coming into contact with hot solder and soldering irons. Grounding & Cleaning Chemical Resistance: Resistance to degradation by inorganic acids, organic acids, reducing agents, aliphatic If the material is used on top of an already properly grounded hydrocarbons, mineral oil, aldehydes, and amines. surface, grounding hardware may not be necessary. Where no Tolerances: properly grounded surface is available, grounding hardware is Width 0.250 required to provide a path-to-ground. Rtg compliance verification Length 0.250 every 1 linear foot of running material. measurements must be made as outlined in ESD TR53 with a Thickness 10% surface resistance meter. See Tech Bulletin TB-7000 for Reztore Surface & Mat Cleaner Matting materials have a tendency to shrink slightly when first unrolled. In applications where length is critical, allow the Application Instructions. material to condition for at least 4 hours before cutting to size. Always using care trim with a sharp knife or razor blade. *Color and texture may vary between lots and mills. For product listings, Click Here RoHS 3, REACH, and Conflict Minerals Statement See the Desco Industries RoHS 3, REACH, and Conflict Minerals Statement: