24V, 2.5A Lead Acid Battery Charger Features RESNA Compliant CEC Compliant LED Indicators Charge State OVP, OTP, SCP Charges AGM Batteries Max 12hrs Charging Time Applications Power Wheelchairs Electric Motorcycle INTEGRITY INNOVATION Mobility Scooters CHALLENGEPHIHONG TECHNOLOGY CO., LTD. Model name DA60U-240A-R Input Rang 100 to 240VAC Input Current 1.5A(RMS)max for 115VAC 0.75A(RMS)max for 230VAC Frequency 47-63 Hz Input No Load Input Power 0.21W at 230VAC Leakage Current <0.1mA max at 264VAC Inrush Current <150A max at 230VAC <75A max at 115VAC(cold start at ambient 250C) Hold-up Time 16mS at input voltage of 230VAC/60Hz, output load 60Wmax DC Output Voltage 24V Bulk Mode Voltage 29.6V Float Mode Voltage 27.3V Charge Current 2.5A Output Ripple 240mV pk-pk 250C Eciency 24V/2.5A efficiency 85% 250C min. at 115Vac/60Hz and 230Vac/50Hz input Over-Voltage Protecon 32V trip point. Output will remain o unl power is recycled Over-Temp. Protecon Non-latching Short-Circuit Protecon The output can be shorted without damage Reverse Polarity Protecon Shall produce no more than 100mA of current or any damage Baery Over-Charge ProteconCharger me-out. No greater than 12hrs, for bulk/absorpon charging Operating: -250C to 500C Temperature Non-Operating -250C to 700C Humidity: 20% to 90% non-condensed Complies with FCC Part 15 Class B Complies with EN55014-1 and EN55014-2 Class B Emissions Complies with EN61000-3-2 Class A Complies with EN61000-3-3 EN61000-4-2:2008 EN61000-4-3:2006+A1:2007+A2:2010 Environmental EN61000-4-4:2012 Immunity EN61000-4-5:2014 + A1:2017 EN61000-4-6:2013 EN61000-4-8:2009 EN61000-4-11:2004 + A1: 2017 ISO 7176-14(RESNA) CISPR 11: 2015 Compliance IEC 60529-IPX1 Insulaon Resistance >100M Ohm minimum, 500VDC Hi-Pot Test Primary to Secondary: 3000VAC for 1min, 10mA AC Input Connector IEC C14 inlet DC Output Cable SJT 18AWG Black 1500mm50mm General +24VDC(XLR connector):White, Pin1(connected to baery +) Output Connecon RTN(XLR connector):Black, Pin 2, 3(connected to baery -) www.phihong.com Revision 5/30/19