PDA075W-T700G Phihong

WWW.PHIHONG.COM 75W LED Driver with 3 Channel Constant Current Outputs witttt PDA075W 0-10V Dimming LED Power Supply Features Class 2 Output per UL1310 IP66 OVP and Short-Circuit Protection THD <20% & 0.9 Power Factor 3 Channel Output Brownout Protection Applications Troffers Safety Approvals cUL/UL8750 Class 2 Output per UL1310 Mechanical Characteristics Length: 242mm (9.53in) Height: 30.5mm (1.2in) Width: 43.5mm (1.71in) Weight: 650g Output Specifications Channel 1~3 DC Output Voltage Output Output Model Current Power Min. Typ. Max. PDA075W-T700G 28V 31V 33V 700mA 25W Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 3/24/2015 WWW.PHIHONG.COM PDA075W-T700G Characteristics INPUT: EMC FCC 47 CFR Part 15, Class A AC Input Voltage 108~304VAC Immunity IEC61000-4-2 Nominal AC Input Voltage IEC61000-4-5 120~277VAC IEC61000-4-11 Maximum Input Current 0.82A (RMS) at 108Vac, 60Hz Dielectric Withstand (Hi-pot) Test Primary to secondary: 3000VAC for 1 minute, 10mA Leakage Current 0.75mA maximum at 277VAC Insulation Resistance Primary to secondary: >5M Ohm 500VDC, 1 Minute AC Inrush Current <100A at 277VAC, 60 Hz Short-Circuit Protection Auto-Recovery Power Factor 0.9 Open Circuit and Output Over-voltage THD Protection < 20% Max Voltage Limit 42V Ripple (Ch1~Ch3) 240mA p-p Input / Output Connections Turn on/off Time Terminal 3 seconds maximum at nominal AC input Position Specification Length Color 0.5 seconds maximum at nominal AC input Black AWG16 Solid Wire 660mm Input White AWG16 Solid Wire 660mm Efficiency Red(+) AWG18 Solid Wire 250mm Output 85% at 120VAC Blue(-) AWG18 Solid Wire 250mm 85% at 277VAC Dim+ Purple(+) AWG18 Solid Wire 250mm Typical Efficiency 87% Dim- Grey(-) AWG18 Solid Wire 250mm Auxiliary Yellow AWG18 Solid Wire 250mm Standby Power <1W maximum Warranty 5 Year Environmental: Temperature Operating 0 to Tc +70C Dimming Curve Non-operation -40 to +85C Operating Humidity 10% to 95%