PDA125W-1A0F Phihong

WWW.PHIHONG.COM 125W Constant Current LED Driver PDA125 Series for Outdoor Lighting Features High Efficiency IP66, Potted UL8750 Compliant 90V-304VAC Input Voltage Range 5 Year Warranty Brownout/Brownout Recovery OVP, Short and Open Circuit Protection Wide Operating Temperature Range Applications General Lighting Outdoor Lighting Street Lighting Architectural Lighting Safety Approvals CE cUL/UL Mechanical Characteristics Length: 217.2mm (8.55in) Height: 38mm (1.49in) Width: 68mm (2.67in) Weight: 936g (2.06lbs) Output Specifications DC Output Voltage Output Output (1) Model (2) Current Power Min. Typ. Max. PDA125X-700F 134V - 178.6V 700mA 125W PDA125X-1A0F 84V - 119V 1050mA 125W PDA125X-1A4F 67V - 89.3V 1400mA 125W PDA125X-2A0F 47V - 61.5V 2000mA 125W PDA125X-2A8F 34V - 44.6V 2800mA 125W PDA125X-3A1F 30V - 40.3V 3100mA 125W Note (1): X is B for non-dimming or W for 0-10V Dimming Note (2): Output power drops to 112.5W maximum when input is 90-100VAC Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 12/19/2013 PDA125X Characteristics WWW.PHIHONG.COM Input: EMC EN55015/CISPR 15/FCC 47 Part 15/18 Class A AC Input Voltage Range 90VAC to 304VAC Immunity IEC61000-4-2 AC Input Frequency IEC61000-4-3 47~63Hz IEC61000-4-4 IEC61000-4-5 Maximum Input Current IEC61000-4-6 2A IEC61000-4-8 IEC61000-4-11 Leakage Current IEC61000-3-2 Class C 0.5mA maximum at 230VAC Input Input Over Current Protection Inrush Current The input power line will be fused with a 2A fuse 30A Short-Circuit Protection OUTPUT: The PSU will withstand a short circuit across the Power Factor outputs without damage 0.9 Open Circuit Protection Ripple and Noise Once the circuit is opened, the output voltage should be <35% (p-p) less than 120% at nominal AC input conditions Efficiency Dielectric Withstand (Hi-pot) Test 93% at 230~ 277VAC Primary to secondary: 4242VDC for 1 minute, 5.5mA 91% at 120VAC Insulation Resistance Turn-on Delay Time Primary to secondary: >5M Ohm 500VDC, 1 Minute <1s maximum at nominal AC Power ON Lifespan Environmental: 50K Hours at full output power, 50C ambient, Tcase < Temperature rating Operation -40 to +60C Non-operation -40 to +85C Wire Connections Case Temperature <75C Position Terminal Color Specification Operating Humidity 10 to 95% Line Black AWG18 Solid Wire Neutral White AWG18 Solid Wire Dimming Function: (W Models) Ground Green/Yellow AWG18 Solid Wire Dimming Control Vout+ Red AWG18 Solid Wire 0-10VDC Vout- Blue AWG18 Solid Wire Dim+ Violet AWG18 Solid Wire Dimming Output to Load Dim- Grey AWG18 Solid Wire PWM at 1000Hz Warranty Dimming Grounding 5 Years Dim(-) and Vout(-) must never be connected together to ensure proper operation and isolation requirements