WWW.PHIHONG.COM Touch Control for Constant Voltage LED Lighting Fixtures PDA-DIM Dimming Module for Under Cabinet Lighting Features Constant Voltage Input 8-42V DC PWM Out Integrate into existing LED luminaries Dimming resolution of 200 steps at 300Hz On-board touch sensor Touch & hold to set dimming level Tap on/off Applications Indoor Lighting Mechanical Characteristics Length: 68mm(2.68in) Height: 20mm(0.79in) Width: 35mm(1.38in) Weight: 30g(1.06oz) Electrical Specifications Input Output Output Model Voltage Voltage Current PDA-DIM2A5 8V-42V 8V - 42V 2.5A PDA-DIM10A 8V-42V 8V - 42V 10A Phihong is not responsible for any errors, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Rev. 3/18/2016 PDA-DIM Characteristics Environmental: Temperature: Immunity Operating: -20C - 40C IEC61000-4-2, Level 3, Criteria B Storage: -20C - 70C IEC61000-4-4, Level 2 Humidity: 90% IP Level: 50 Input Connector (CN1) and Output connector EMI (CN2): terminal block 2 pins, type ED500V-02P or EN55022 radiated Class B, FCC part 15 Class B the equivalent, rated 300V 16A. Use 16-18 AWG, strip wires to 5-6mm Dimension Diagram unit: mm Rev. 3/18/2016