PMA18A-120PHW Phihong

WWW.PHIHONG.COM 18W Medical Grade Adapter Features Meets DoE Level VI Suitable for BF applications with system consideration IEC60601-1:2005+A1:2012 2xMOPP approved OVP, OCP, SCP, OTP, brown-in and brown out protections IEC60601-1-2 Ed4 2014 compliance LPS compliant Applications CPAP & BIPAP machines Nebulizers Medical imaging Blood pressure monitor Safety Approvals UL 60601-1 IEC60601-1 Mechanical Characteristics Length: 82mm (3.23in) Height: 30mm (1.18in) Width: 43.2mm (1.7in) Output Specifications (1) Load DC Output Ripple Regulation Case Model Voltage Min. Max. P-P (max.) Line & Load Color PMA18A-120PHW-R 12V 0A 1.5A 150mV 5% White Notes: (1)Test by 20Mhz bandwidth mode hi resolution with 10uF and 0.1uF capacitor Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 12/10/2018 PMA18A-120PHW Characteristics WWW.PHIHONG.COM Input: Immunity AC Input Voltage Rating ESD: EN 61000-4-2 110 to 240V AC RS : EN61000-4-3 EFT/Burst : EN61000-4-4 AC Input Voltage Range Surge: EN 61000-4-5 100 to 240V AC CS : EN61000-4-6 Power Frequency Magnetic Field : EN61000-4-8 AC Input Frequency Voltage Dips : EN61000-4-11 50 to 60Hz Over-Voltage Protection Input Current 16V maximum 0.6A ~ 0.25A at 100VAC ~ 240VAC Short-Circuit Protection Leakage Current The power supply shall be protected when <100uA at 264VAC/50Hz operating any output in overload condition, or when operating any output in a short. The Inrush Current power supply shall be self-recovering when 80A maximum at 240V AC the fault condition is removed circuit (Cold start & at input rated voltage +/-12.5% condition. Output: Over-Current Protection Efficiency The power supply will be protected when DOE Level VI output power at 2.2A(min) of all rated dc output Environmental: Temperature Over-Temperature Protection Operation 10C to +40C Over-temperature protection sensor Non-operation -20C to +80C Relative Humidity 95% RH Max Dielectric Withstand (Hi-pot) Test Pri. to Sec. >4000VAC 10mA for 1 Minute Emissions Complies with FCC Class B DC Output Connector Complies with EN55032 Class B DC plug type 5.5 x 2.1 x 10mm (fork & groove) DC plug pin assignment: Inner (+V), Outer GND(-)