WWW.PHIHONG.COM 4 Port IEEE802.3at Gigabit High Power over Ethernet Midspan Features Compliant with the IEEE802.3at Full Power of 134.4W33.6W Per Standard Port 10/100/1000 Base-T Compatible No Power Management Required Cisco AP1250 Full Power Support Full Protection OCP, OVP 2 Optional Kit available for a 19 Rack 1 Year Warranty 1 Mount Applications VoIP Phones Security Systems Access Points IP Cameras Safety Approvals cUL/UL CE Mechanical Characteristics Length: 224.9mm (8.85in) Height: 48.5 mm (1.91in) Width: 200mm (7.87in) Weight: 1.4Kg (3.0lbs) Output Specifications Model Number of Ports SNMP POE125U-4-AT-R 4 No 3 POE125U-4-AT-N-R 4 Yes Reference Files: 1. Multiport Midspan Installation Manual.pdf 2. 19in Rack Mounting Kit Datasheet.pdf 3. SNMPv2c User Manual-Rev1.7.pdf 4. SNMPv2c Firmware-Rev1.7.zip 5. SNMPv2c MIB 10 30 2009.zip Notes: 1. Optional 19 Rack mounting adapter to mount 1 POE125U or 2 side by side. Order P/N POE125U-ACCY01 2. Effective January 1, 2019, warranty is valid for one year from purchase date. Optional extended warranties available-please consult factory for more information 3. Trap functions are no longer supported Phihong is not responsible for any error and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 6/6/2019 1 POE125U-4AT Characteristics WWW.PHIHONG.COM INPUT: EMC AC Input FCC Class B Voltage Range 90 to 264VAC EN55022 Class B Input Frequency Isolation Test 47-63Hz Primary to Secondary: 4242VDC, 1 minute Primary to Ground: 2121VDC, 1 minute Input Current Secondary to Ground: 2121VDC, 1 minute 2.5A (RMS) max for 90VAC 1.3A (RMS) max for 240VAC Immunity EN50082-1 ESD: EN61000-4-2, Level 3 Leakage Current RS: EN61000-4-3, Level 2 3.5mA max 254VAC 60Hz EFT: EN61000-4-4, Level 2 Surge: EN61000-4-5, Level 3 AC Inrush Current CS: EN61000-4-6, Level 2 30A (RMS) max for 115VAC Voltage Dips EN61000-4-11 60A (RMS) max for 230VAC Harmonic: EN61000-3-2, Class A OUTPUT: IEEE 802.3at Interoperability Total Output Power UNH Interoperability report available on 33.6W per port request Ripple and Regulation FEATURES: 100mV max Cisco No extern parts required for Legacy devices: 2 Efficiency VoIP Phones:7910, 7912, 7940, 7960 75% (typical) at max load, 120VAC 60Hz Access Points:1040, 1140, 1250, 1260, 3500 Hold-up Time Over Voltage/Current, Short Circuit 10mS min. 120VAC, max load Protection Outputs equipped with short circuit protection Transient O/P Voltage Protection and overload protection as per 802.3at 60V max at switch on/off at any AC line Phase specifications. The output can be shorted permanently without damage Turn-On Delay Time 3 sec max at max load,120VAC 60Hz,25Hz Over Temperature Protection Automatic shutdown without damage ENVIRONMENTAL: Temperature Indicators Operation 0C to +40C Green LED: Power detected ON Non-operation -25C to +65C Yellow LED: Fault detected Humidity 5 to 90% Input Connector AC Input IEC320 C14 Notes: 1. The characteristics defined are at ambient temperature of 25C unless otherwise specified 2. Efficiency is measured after 30 minutes burn-in Revision 6/6/2019