POE21-120H-R Phihong

WWW.PHIHONG.COM DC-DC Power over Ethernet Splitter 10W for POE Cameras and 12VDC for Heaters, Illuminators Features Connection and DC disconnection per 10W PoE output and 12W DC device attached to Data Out output at 12VDC DC Good LED DC Power and PoE/Data Output Power IEEE802.3af Camera Gigabit Compatible End device must be IEEE802.3af Requires Phihong PoE Plus for full compatible functionality 1 Year Warranty Non-Vented Case Applications IP Cameras Heaters and Illuminators Access Controls Safety Approvals CE Mechanical Characteristics Length: 100mm (3.937in) Height: 28mm (1.098in) Width: 56mm (2.205in) Weight: 0.142Kg (0.313lb) Output Specifications Output Power PoE Load DC Load Model PoE DC Min Max Min Max 12W at 12V 175mA at 57V 225mA at 44V POE21-120H* 10W 0A 1A DC DC DC *Model will not operate without Phihongs IEEE802.3at power injector and can only power an IEEE802.3af compatible end device. Reference files: POE21-120H user manual.pdf Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 12/10/2018 POE21-120H Characteristics WWW.PHIHONG.COM INPUT: ESD: EN61000-4-2. Level 3 Unit receives power from Phihong PoE Plus RS: EN61000-4-3. Level 2 Note: RS and ESD tested with POE36U-1AT Midspans only using Cat 5e or Cat 6 wiring up to 100 meters per IEEE802.3. For EMC information on PoE Plus Midspans please go Complies with FCC Class B to www.midspans.com Complies with EN55032 Class B DC Input Current Dielectric withstand (HI-POT) Test 0.7A (DC) and 45VDC at maximum load Primary to secondary: 2121VDC for 1 minute, 10mA DC Input Voltage Rating 45 57VDC for 12V Insulation Resistance Primary to Secondary: >10M Ohm 500V OUTPUT: DC Regulation Line and Load 2% FEATURES: Indicators Ripple o GREEN LED Output power ON 120mV maximum at 25 C Input and Output Data Connector Efficiency RJ45 75% minimum at maximum load, 48V input Output Connector O/P Voltage Protection POE and data RJ45 Jack In case of output over voltage overload, crowbar will short. The output can be DC Output shorted permanently without damage. Center Positive Barrel 12mm x 2.1mm ID x 5.5mm OD. Tip is user changeable for other ENVIRONMENTAL: sizes Temperature Operation 0 to +40C Non-operation -20 to +65C Humidity 5 to 90% Immunity