WWW.PHIHONG.COM 4 Ports 60W per Port Power over Ethernet Ultra PoE Midspan Features Fully Compliant Detection, Limited Power Source Disconnect and Voltage Control Gigabit Compatible IEEE802.3af Full Power at 60W per port Proprietary Detection, Disconnect and Diagnostic LEDs Overload Protection SNMP Management 1 Full Protection OCP, OVP 1-Year Warranty Optional Mounting Kit for 19 Rack Applications LCD Displays Computer Stations Wireless Access Points Kiosks High Power Radios Safety Approvals cUL/UL CE Mechanical Characteristics Length: 224.9mm (8.85in) Height: 48.5 mm (1.91in) Width: 200mm (7.87in) Weight: 1.59Kg (3.5lbs) Output Specifications Model Number of Ports POE240U-4UP-N-R 4 Notes: 1. Effective January 1, 2019, warranty is valid for one year from purchase date. Optional extended warranties available-please consult factory for more information Optional 19 Rack mounting adapter to mount 1 POE125U or 2 side by side order P/N POE125U-ACCY01 Reference files: 1. SNMPv2c User Manual-Rev1.7.pdf 2. SNMPv2c Firmware-Rev1.7.zip 3. SNMPv2c MIB 10 30 2009.zip Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 3/12/2019 POE240U-4UPN-R Characteristics WWW.PHIHONG.COM INPUT: EMC AC Input Voltage Range EN55022 Radiate Class A 90 to 264VAC EN55022 Conducted Class B Input Frequency Isolation Test 47-63Hz Primary to Secondary: 4242VDC for 1 minute Primary to Ground: 2121VDC for 1 minute Input Current Secondary to Ground: 2121VDC for 1 minute 5A (RMS) max for 90VAC 2.5A (RMS) max for 230VAC Insulation Resistance Primary to Secondary: >10M OHM 500VDC Leakage Current Primary to Field Ground: >10M OHM 3.5mA max at 254VAC 60Hz 500VDC AC Inrush Current Immunity EN50082-1 30A (RMS) max for 115VAC ESD: EN61000-4-2. Level 3 60A (RMS) max for 230VAC RS: EN61000-4-3. Level 2 EFT: EN61000-4-4. Level 2 OUTPUT: Surge: EN61000-4-5. Level 3 Total Output Power CS: EN61000-4-6. Level 2 60W per port at 56V+1/-2 Voltage Dips EN61000-4-11 Total power on all ports 240W Harmonic: EN61000-3-2 Class A Ripple and Regulation IEEE 802.3af Interoperability 250mV max If 25kohm is detected the unit operates in IEEE802.3at mode 33.6W 2 pair powering. Efficiency 12.5k detection resistance required for full 75% (typical) at max load,120VAC 60Hz power UNH Interoperability report available on Hold-up Time request 10mS min. 120VAC and max load FEATURE: Transient O/P Voltage Protection Cisco Legacy detection 60V max at switch on/off at any AC line Phase No extern parts required for Legacy devices: VoIP Phones: Turn-On Delay Time 7910, 7912, 7940, 7960 20 sec max at max load,120VAC 60Hz, 25Hz Access Points: 350, 1100, 1200, 1250 ENVIRONMENTAL: Temperature Over Voltage/Current Protections Operation 0 to +40C Outputs equipped with short circuit protection Non-operation -25 to +65C and overload protection as per 802.3af Humidity 5 to 90% specifications except for max average current is 1.69A