POE29U-1AT(PL)D Phihong

WWW.PHIHONG.COM 30W Single Port Power over Ethernet Midspan IEEE802.3at Compliant Power Injector Features Compliant with IEEE802.3at Standard Limited Power Source Non-vented Case Gigabit Compatible Full Protection OVP, OCP Shielded RJ45 1 year warranty Applications IP Telephones Security Cameras Wireless Access Points IP Print Servers Bluetooth Access Points WiMAX Access Points Safety Approvals cUL/UL(60950)/(62368-1) CE(IEC60950-1)/(IEC62368-1) CB RCM CCC NOM/NYCE BSMI PSB EAC KC+KCC IRAM(TUV-s) BIS Mechanical Characteristics Length: 140mm (5.51in.) Height: 36mm (1.42in.) Width: 65mm (2.55in.) Weight: 0.22Kg (7.76oz) Output Specifications DC Output Load Regulation Model AC Input Voltage Min. Max. Line Load POE29U-1AT(PL)D-R Three Wire 56V 10mA 536mA 54-57V Phihong is not responsible for any error and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 10/25/2021 1 POE29U-1AT(PL)D-R Characteristics WWW.PHIHONG.COM INPUT: EMC AC Input Voltage Rating ESD: IEC61000-4-2 , Level 3 100 to 240VAC RS: IEC61000-4-3, Level 3 EFT/Burst: IEC61000-4-4, Level 2 AC Input Voltage Range Surge: IEC61000-4-5, Level 3 90 to 264VAC CS: IEC61000-4-6 , Level 3 Voltage Dips: IEC61000-4-11 AC Input Current Harmonic: IEC61000-3-2, Class A 0.8A (RMS) maximum at 120VAC 0.55A (RMS) maximum at 240VAC Isolation (HI-POT) Primary to secondary: 1500VAC for 1 AC Input Frequency minute, 10mA 47 to 63Hz Insulation Resistance Leakage Current Primary to secondary: 10M Ohm 500VDC 3.5mA max FEATURES: Max In-rush Current OCP/OVP/Short Circuit Protection 60A max at 240VAC and max load (Cold OCP: 750mA Max Start at ambient 25C) OVP: Latching Short Circuit: The output can be shorted OUTPUT: permanently without damage. Non-latching Output Power auto recovery. 30W Indicator Hold up Time Solid Green: unit has detected a 10mSec min at max load at 120VAC, 60Hz IEEE802.3at or af load/PD Blinking Green: Power ON ready for 2 Efficiency connection 80% Typical at max load at 120VAC, 60Hz Fast Blinking Amber/Green: Invalid load connected ENVIRONMENTAL: Slow Blinking Amber/Green: fault Temperature Operating -20C to +50C AC Input Connector Non-operating -20C to +70C IEC320 C14 - three wire Relative Humidity 5 to 90% Output Connection EMI +pins 3,6 / -pins 1,2 Complies with EN55032 Class B Complies with FCC part 15 Class B Data IN/POE OUT Connector Shielded RJ45 Notes: 1. The characteristics defined are at ambient temperature of 25C unless otherwise specified 2. Efficiency is measured after 30minutes burn-in Revision 10/25/2021