PHIHONG USA WWW.PHIHONG.COM 15W Single Port Power-over-Ethernet Midspan IEEE802.3AF Compliant Power Injector Features Compliant with IEEE802.3af Standard Gigabit data rates Non-Vented Case Full Protection OCP, OVP Small case size Low Cost 1 Year Warranty Applications IP Telephones Security Cameras Wireless Network Access Points Safety Approvals cUL/UL 60950-2 CE IEC/EN 60950-2 LPS Mechanical Characteristics Length: 106mm (4.17in) Height: 27mm (1.1in) Width: 40mm (1.57in) Weight: 100g (3.5oz.) Output Specifications Load Regulation Input DC Output Model Output Power Connector Voltage Min Max Line Load POE15M-1AF C6 56V 0A 0.275A 5% 15.4W 1 POE15W-1AF C8 56V 0A 0.275A 5% 15.4W Notes: 1. C8 is polarized, however non-polarized cables can be used. The internal circuit does not require polarization. Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 2/5/2018 POE15X-1AF Characteristics WWW.PHIHONG.COM INPUT: AC Input Voltage Range Immunity EN50082-1 90 to 264VAC ESD: EN61000-4-2. Level 3 RS: EN61000-4-3. Level 2 AC Input Voltage Rating EFT: EN61000-4-4. Level 2 100 to 240VAC Surge: EN61000-4-5. Level 3 CS: EN61000-4-6. Level 2 AC Input Current Voltage Dips EN61000-4-11 0.5A (RMS) max for 90VAC Harmonic: EN61000-3-2 Class A 0.35A (RMS) max for 240VAC Isolation Test Leakage Current Primary to Secondary: 3000VAC for 1 second 0.25mA max 254VAC 50Hz 10mA AC Input Frequency Insulation Resistance 47-63Hz Primary to Secondary: >10M OHM 500VDC AC Inrush Current FEATURES: 30A (RMS) max for 115VAC Over Voltage/Current/Short Circuit 60A (RMS) max for 230VAC Protection The output is equipped with short-circuit OUTPUT: protection and overload protection as per the Total Output Power IEEE802.3af specification and conforms to 15.4W UL60950-2. The output can be shorted permanently without damage. Ripple and Regulation 200mV max 25C, 115VAC, 60Hz & Indicator 230VAC, 50Hz Solid Green: unit has detected a valid IEEE802.3af load Hold-up time: Blinking Green: Power ON active with no 16mS min at max load and 120VAC, 60Hz load Blinking Green/Solid Red: Over load condition ENVIRONMENTAL: Blinking Red/ Solid Green: Invalid load Temperature Operation -20C to +50C Data in/Output Connector Non-operation -25C to +70C RJ45 Humidity 5 to 90% E option = Earth grounded shielded Rj45 connectors EMC FCC Part 15 Class B Output Connection EN55022 Class B +pin 3,6 / -pins 1,2 Revision 2/5/2018