POE31U-1AT-R Phihong

WWW.PHIHONG.COM 30W Single Port Power over Ethernet Midspan IEEE802.3at Compliant Power Injector Features Compliant with IEEE802.3at Standard Limited Power Source Non-vented Case Gigabit Compatible Full Protection OVP, OCP May power Cisco AP1250 with ACCY125X dongle 1 year warranty Applications IP Telephones Security Cameras Wireless Access Points IP Print Servers Bluetooth Access Points WiMAX Access Points Safety Approvals CE cUL/US Mechanical Characteristics Length: 140mm (5.51in.) Height: 36mm (1.42in.) Width: 65mm (2.55in.) Weight: 0.2Kg (7.58oz) Output Specifications DC Output Load Regulation Model AC Input Voltage Min. Max. Line Load 1 POE31U-1AT-R Three Wire 56V 10mA 535mA 54-57V 1 POE31W-1AT-R Two Wire 56V 10mA 535mA 54-57V Notes: (1) Consult factory for availability Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 1/11/2019 POE31X-1AT Characteristics WWW.PHIHONG.COM INPUT: EMC AC Input Voltage Rating ESD: IEC61000-4-2 Level 3 100 to 240VAC RS: IEC61000-4-3 Level 3 EFT/Burst: IEC61000-4-4 Level 2 AC Input Voltage Range Surge: IEC61000-4-5 Level 3 90 to 264VAC CS: IEC61000-4-6 Level 3 Voltage Dips: IEC61000-4-11 AC Input Current Harmonic: IEC61000-3-2 Class A 0.8A (RMS) maximum at 120VAC 0.55A (RMS) maximum at 240VAC Isolation (HI-POT) Primary to secondary: 1500VAC for 1 AC Input Frequency minute, 10mA 47 to 63Hz Insulation Resistance Leakage Current Primary to secondary: 10M Ohm 500VDC 350uA maximum for U models 250uA maximum for W models FEATURES: Over Voltage/Current, Short Circuit Max In-rush Current Protection 60A maximum at 240VAC and maximum The output is equipped with short-circuit load (Cold Start at ambient 25C) protection and overload protection as per the IEEE 802.3at specification and conforms to OUTPUT: UL60950-2. The output can be shorted Output Power permanently without damage. 30W Indicator Hold up Time Solid Green: Valid IEEE802.3at load 10mSec min at max load at 120VAC, 60Hz detected and connected ON Blinking Green: Power ON ready for Transient O/P Voltage Protection connection 60V max at switch on/off at any AC line Blinking Red/Green: Invalid load connected phase Blinking Red: fault Efficiency AC Input Connector 80% Typical at max load at 120VAC, 60Hz IEC320 C14 - U Models three wire IEC320 C8 W Models two wire Environment Operating Temperature 0 to +40C Output Connection Non-operating Temperature -20 to +65C +pins 3,6 / -pins 1,2 Relative Humidity 5 to 90% Data IN/POE OUT Connector EMI RJ45 Complies with FCC Class B Complies with EN55032 Class B Warranty 1 year