WWW.PHIHONG.COM 33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at - Non-Vented Case with Mounting Standard Bracket Diagnostic LEDs Full Protection OCP, OVP Gigabit Compatible 1 Year Warranty IP67 Rating (Waterproof) Optional Cable Glands for waterproof operation (sold separately) 40 to +60C Temperature Range Applications Outdoor Security Cameras Outdoor Emergency Lighting Outdoor Wireless Access Points Safety Approvals cUL/UL CE Mechanical Characteristics (without Mounting Bracket) Length: 252.1mm (9.93in) Height: 78mm (3.07in) Width: 176mm (6.93in) Weight: 1.7Kg (3.75lb) Mechanical Characteristics (with Mounting Bracket) Length: 300mm (11.81in) Height: 82mm (3.23) Width: 184mm (7.24in) Weight: 2.83kg (6.24lb) Output Specifications Load Regulation DC Output Model Voltage Min. Max. Line Load 1 POE33U-1AT-R 56V 0A 0.60A 54-57Vdc under all conditions Notes: (1) Consult factory for availability Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 12/11/2018 POE33U Characteristics WWW.PHIHONG.COM minute, 10mA INPUT: Primary to Field Ground: 2121VDC for 1 AC Input Voltage Range minute, 10mA 90 to 264VAC Output to Field Ground: 2121VDC for 1 minute, 10mA AC Input Voltage Rating Immunity 100 to 240VAC ESD: IEC61000-4-2 Level 3 AC Input Current RS: IEC61000-4-3 Level 3 EFT: IEC61000-4-4 Level 2 1.0A (RMS) and 90VAC at maximum load Surge: IEC61000-4-5 Level 3 .55A (RMS) and 240VAC at maximum load CS: IEC61000-4-6 Level 3 AC Input Frequency Voltage Dips IEC61000-4-11 Harmonic: EN61000-3-2 Class A 47 to 63Hz Insulation Resistance Leakage Current Primary to Secondary: >10M OHM 3.5mA for 254VAC, 50Hz 500VDC Primary to Field Ground: >10M OHM Max Inrush Current 500VDC 30A for 115VAC at maximum load 60A for 230VAC at maximum load FEATURES: OUTPUT: Over Voltage/Current, Short Circuit Protection Total Output Power The output can be shorted permanently 33.6W without damage Ripple and Regulation 250mV maximum Indicators LED 1: Input power ON LED 2: Detected a valid IEEE802.3at Class Efficiency 4 load 70% (typical) at maximum load, and 120VAC 60Hz LED 3: Detect and Connected to a valid IEEE802.3af load ENVIRONMENTAL: Input Connector Temperature 3 pin terminal block with M3.5 screw Operation -40 to +60C Non-operation -40 to +85C terminal for appropriate connection use minimum 14AWG wire and M3.5 spade lug Humidity Output PoE Connector Operation 5 to 90% RJ45 EMI Output PoE Connection Complies with FCC Class B +pins 3, 6 / -pins 1, 2 Complies with EN55032 Class B Isolation Test Primary to Secondary: 4242 VDC for 1