WWW.PHIHONG.COM 24 Port Gigabit Power over Ethernet Midspan POE370U for 10/100/1000 Base-T Networks Features IEEE 802.3af Detection, Disconnect Full Power of 370W--15.4W per Port and Overload Protection No Power Management required NIC Interface (Optional) Full Protection OTP, OCP, OVP SSL Option with SNMPv3 48V RPS Input (Optional) 10/100/1000 base T Compatible Cisco Legacy Detection Limited Lifetime Warranty 1U Rack Mounting Kit Ships with Unit Applications VoIP Phones Security Systems Access Point Lighting Systems with Single UPS Safety Approvals cUL/UL SAA CE C-Tick Mechanical Characteristics Length: 438mm (17.25in) Height: 44.5 mm (1.75in) Width: 228mm (8.98in) Weight: 3.8Kg (8.5lbs) Output Specifications Model Number of Ports Maximum Output Power POE370U-480-24-R 24 370W Reference Files: 1. Multiport Midspan Installation Manual.pdf 2. 19in Rack Mounting Kit Datasheet.pdf 3. SNMPv2c User Manual-Rev1.7.pdf 4. SNMPv2c Firmware-Rev1.7.zip 5. SNMPv2c MIB 10 30 2009.zip Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 12/11/2018 POE370U-480-24-R Characteristics WWW.PHIHONG.COM INPUT: ENVIRONMENTAL: AC Input Voltage Range Temperature 90 to 264VAC Operation 0 to +40C Non-operation -25 to +65C AC Input Voltage Rating Humidity 5 to 90% 100 to 240VAC EMC AC Input Current En55022 Class B, FCC Class B with FTP 5.5A (RMS) maximum for 90VAC cabling 2.75A (RMS) maximum for 240VAC EN55022 Class A, FCC Class A with UTP cabling Leakage Current 3.5mA maximum 254VAC 60Hz Isolation Test Primary to Secondary: 4242VDC for 1 AC Input Frequency minute 47-63Hz Primary to Ground: 2121VDC for 1 minute Secondary to Ground: 2121VDC for 1 AC Inrush Current minute 30A (RMS) maximum for 115VAC 60A (RMS) maximum for 230VAC Immunity EN50082-1 ESD: EN61000-4-2. Level 3 OUTPUT: RS: EN61000-4-3. Level 2 Total Output Power EFT: EN61000-4-4. Level 2 15.4W per port Surge: EN61000-4-5. Level 3 CS: EN61000-4-6. Level 2 Ripple and Regulation Voltage Dips EN61000-4-11 100mV maximum Harmonic: EN61000-3-2 Class A Efficiency IEEE 802.3af Interoperability 75% (typical) at maximum load, and UNH Interoperability report available on 120VAC 60Hz request Hold-up Time FEATURES: 16mS min. 120VAC at maximum load Cisco Legacy detection No extern parts required for Legacy devices: Transient O/P Voltage Protection VoIP Phones: 60V maximum at switch on and off at any 7910, 7912, 7940, 7960 AC line Phase Access Points: 350, 1100, 1200 Turn-On Delay Time 3 sec maximum at maximum load, and Over Voltage/Current, Short Circuit 120VAC 60Hz, 25Hz Protection The output can be shorted permanently without damage Revision 12/11/2018