WWW.PHIHONG.COM 60W Passive Power over Ethernet Adapter Lowest Cost Ultra PoE Power Injector Features Continuous flow of power with no Lowest Cost Ultra PoE detection Gigabit Base-T Data Rate Very Low leakage Full Protection OCP, OVP Non-Vented Case Level VI Efficiency 1 Year Warranty Applications Satellite Receivers Security Camera Wireless Network Access Points LCD Displays Kiosks WiMax Access Points Safety Approvals cUL/UL CE Mechanical Characteristics Length: 163mm (6.4in) Height: 36mm (1.42in) Width: 65mm (2.56in) Weight: 0.4Kg Output Specifications Output Model Number Voltage Output Current Input Connector Gigabit POE61U-560DG-R 56V 1.1A 3 Wire C14 Yes Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 1/31/2019 POE61U-560DG-R Characteristics WWW.PHIHONG.COM INPUT: AC Input Voltage Range Isolation Test 90 to 264VAC Primary to Secondary: 4242VDC for 1 minute, 10mA AC Input Voltage Rating Primary to F.G.: 2121VDC for 1 minute, 100 to 240VAC, 47-63Hz 10mA Secondary to F.G.: 2121VDC for 1 minute, AC Input Current 10mA 2.0A (RMS) maximum for 90VAC 1.2A (RMS) maximum for 240VAC Immunity ESD: EN61000-4-2. Level 3 Leakage Current RS: EN61000-4-3. Level 2 0.25mA maximum for 264VAC, 50Hz EFT: EN61000-4-4. Level 2 Surge: EN61000-4-5. Level 3 AC Inrush Current CS: EN61000-4-6. Level 2 30A maximum for 115VAC Voltage Dips EN61000-4-11 60A maximum for 230VAC Harmonic: EN61000-3-2 Class A (at cold start, 25C) Insulation Resistance OUTPUT: Primary to Secondary: >10M OHM 500VDC Total Output Power Primary to Field Ground: >10M OHM 60W 500VDC Output Ripple FEATURE: 250mVp-p Over Voltage/Current, Short Circuit Protection DC Offset Outputs equipped with short circuit protection No data degradation with DC imbalance 18mA and overload protection. The output can be shorted permanently without Efficiency damage DOE Level VI Input Connector Hold-up Time IEC320 C14 10mS min. 120VAC and maximum load Output Connection ENVIRONMENTAL: 4-pair powering Temperature Pins 3,6, 4,5(+) Pins 1,2, 7,8 (-) Operation 0 to +40C Non-operation -20 to +65C Humidity 5 to 90% EMC Complies with FCC Class B Complies with EN55032 Class B