WWW.PHIHONG.COM 75W DC Input Power over Ethernet Midspan Ultra Power over Ethernet Single Port Injector Features Full 75W Ultra Power DC Input Diagnostic LEDs Full Protection OCP, OVP Single Source 4 Pair Power Current Gigabit Compatible Sharing 1 Year Warranty Broken Wire Detection Limited Power Source 12.5K Detection Standard Applications Satellite Receiver Security Cameras Wireless Network Access Points Kiosks LCD Displays Computer Workstations Safety Approvals CE Mechanical Characteristics Length: 166mm (6.53in) Height: 44mm (1.73in) Width: 80mm (3.15in) Weight: 0.5Kg (1.1lbs) Output Specifications DC Output 1 Model Load Regulation Voltage Line Load Min. Max. 2 POE75D-1UP +56V 15mA 670mA 54-57V DC under all conditions Notes: 1. Output is over both data and spare pairs for combined load of 1.34A 2. Consult factory for availability Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 5/29/2018 POE75D-1UP Characteristics WWW.PHIHONG.COM INPUT: Immunity DC Input Voltage Rating ESD: EN61000-4-2 Level 3 36 to 72V DC RS: EN61000-4-3 Level 3 EFT: EN61000-4-4 Level 2 DC Input Current Surge: EN61000-4-5 Level 2 4.0A, 32V DC at maximum load 2.0A, 72V DC at maximum load Insulation Resistance Primary to Secondary: >10M OHM OUTPUT: 500VDC Total Output Power Primary to Field Ground: >10M OHM 75W 500VDC Ripple and Regulation Over Voltage Protection 250mV maximum Conforms to UL 60950-1 paragraph 2.2.3 DC Offset Over Current, Short Circuit Protection No data degradation with DC imbalance The output can be shorted permanently 18mA per min. without damage Efficiency MTBF 85% (typical) at maximum load, at 48V DC 150K Hours minimum at maximum load, 48VDC, and ambient 25C Transient O/P Voltage Protection 60V maximum Indicators Green LED 1: DC Power ON ENVIRONMENTAL: Red LED: Fault detected Temperature Green LED 2: Valid load detected and Operation -20 to +40C connected Non-operation -25 to +65C Humidity 5 to 90% Input Connector -- Anytek OQ0355510000G EMI Mate Anytek TJ0350520000G OR Complies with FCC Class B TJ035152000G. Anytek is part of Giga-Way Complies with EN55032 Class B Technology Corp. Isolation Test Output Connection Primary to Secondary: 2121VDC for 1 minute 4-pair powering for full power 10mA Pins 3,6, 4,5(+) Pins 1,2, 7,8 (-) Primary to Field Ground: 2121VDC for 1 minute, 10mA Secondary to Field Ground: 2121VDC for 1 minute, 10mA (4 Second Ramp up Time)