WWW.PHIHONG.COM 75W Power over Ethernet Adapter Ultra Power over Ethernet Single Port Injector Features Compliant Detection, Disconnect and Proprietary Detection, Disconnect and Overload Voltage Control per IEEE802.3af Protection Diagnostic LEDs Full Protection OCP, OVP Gigabit Compatible Single Source 4 Pair Power Current Sharing 1 Year Warranty Broken Wire Detection 25K Detection for Full Power Class 4 Operation Applications Satellite Receiver Security Cameras Wireless Network Access Points Kiosks LCD Displays Computer Workstations Safety Approvals cUL/UL CE Mechanical Characteristics Length: 166mm (6.53in) Height: 44mm (1.73in) Width: 80mm (3.15in) Weight: 0.5Kg Output Specifications Load Regulation DC Output Model Voltage Min. Max.* Line Load POE75U-1UP(PD) 56V 0A 0.67A 54-57V DC under all conditions Note (*) = Load per output. Output on spare pairs and data pairs is 0.67A for a combined output current of 1.34A. Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 3/2/2015 WWW.PHIHONG.COM POE75U-1UP-PD Characteristics EMC INPUT: FCC Part 15 Class B AC Input Voltage Range EN55022 Class B 90 to 264VAC Isolation Test AC Input Voltage Rating Primary to Secondary: 4242VDC for 1 minute 10mA 100 to 240VAC, 47-63Hz Primary to Field Ground: 2121VDC for 1 minute Output to Field Ground: 2121VDC AC Input Current 2.0A (RMS) maximum for 90VAC Immunity 1.2A (RMS) maximum for 240VAC ESD: EN61000-4-2. Level 3 RS: EN61000-4-3. Level 3 Leakage Current EFT: EN61000-4-4. Level 2 3.5mA maximum 254VAC 60Hz Surge: EN61000-4-5. Level 3 CS: EN61000-4-6. Level 2 AC Inrush Current Voltage Dips EN61000-4-11 30A (RMS) maximum for 115VAC Harmonic: EN61000-3-2 Class A 60A (RMS) maximum for 230VAC Insulation Resistance OUTPUT: Primary to Secondary: >10M OHM 500VDC Total Output Power Primary to Field Ground: >10M OHM 500VDC 75W Detection Ripple and Regulation Requires 25K detection on data pairs 3,6(+) 1,2(-) for 250mV maximum full power 75W DC Offset FEATURE: No data degradation with DC imbalance 18mA per min. Over Voltage/Current, Short Circuit Protection Outputs equipped with short circuit protection and Efficiency overload protection. The output can be shorted 80% (typical) at maximum load, and 120VAC 60Hz permanently without damage. Hold-up Time Indicators 10mS min. 120VAC and maximum load Green LED 1: DC Power OK Red LED: Fault detected Transient O/P Voltage Protection Green LED 2: Power detected CONNECT at 75W 60V maximum Input Connector ENVIRONMENTAL: IEC320 inlet 3 pin Temperature Operation -20 to +40C Output Connection Non-operation -25 to +65C 4-pair powering Pins 3,6, 4,5(+) Pins 1,2, 7,8 (-) Humidity Operation 5 to 90% Warranty 1 Year