WWW.PHIHONG.COM 8 Port Gigabit Power over Ethernet Midspan POE125U for 10/100/1000 Base-T Networks Features IEEE802.3af Compliant Full Power of 123.2W15.4W per port Low Cost No Power Management Required Gigabit Compatible Full Protection OTP, OCP, OVP 1 2 Optional Mounting Kit for 19 Rack 1 Year Warranty Optional SNMPv3 with TLS/SSL Optional Cisco Legacy Detection Applications VoIP Phones Security Systems Access Points IP Cameras Safety Approvals cUL/UL CE Mechanical Characteristics Length: 224.9mm (8.85in) Height: 48.5 mm (1.91in) Width: 200mm (7.87in) Weight: 1.4Kg (3.0lbs) Output Specifications Model Number of Ports Cisco Legacy Support SNMP POE125U-8-C-R 8 Yes No 3 POE125U-8-N-R 8 Yes Yes Reference files: 1. Phihong Midspan PoE GUI User Manual-v1.0.pdf 2. Phihong Midspan PoE GUI Installation v1.0.exe 3. PL2303 Prolific DriverInstaller v1 12 0.zip 4. POE125U Series Firmware-Rev2.5.zip 5. Multiport Midspan Installation Manual.pdf 6. 19in Rack Mounting Kit Datasheet.pdf 7. SNMPv3 Firmware.zip 8. Certificate Software.zip Notes: 1. Optional 19 Rack mounting adapter to mount 1 POE125U or 2 side by side order P/N POE125U-ACCY01 2. Effective January 1, 2019, warranty is valid for one year from purchase date. Optional extended warranties available-please consult factory for more information 3. Trap functions are no longer supported Phihong is not responsible for any error and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 6/6/2019 1 POE125U-8 Characteristics WWW.PHIHONG.COM INPUT: ENVIRONMENTAL: AC Input Voltage Range Temperature 90 to 264VAC Operation 0C to +40C Non-operation -25C to +65C Input Voltage Rating Humidity 5% to 90% 100 to 240VAC EMI Input Frequency Complies with FCC Class B 47 to 63Hz Complies with EN55032 Class B Input Current Immunity 2.5A (RMS) max for 90VAC ESD: EN61000-4-2 Level 3 1.3A (RMS) max for 230 AC RS: EN61000-4-3 Level 2 EFT: EN61000-4-4 Level 2 Leakage Current Surge: EN61000-4-5 Level 3 <3.5mA max at 254VAC, 60Hz CS: EN61000-4-6 Level 2 Voltage Dips: EN61000-4-11 AC Inrush Current Harmonic: EN61000-3-2 Class A 30A (RMS) max for 115VAC 60A (RMS) max for 230VAC IEEE802.3af Interoperability UNH Interoperability report available upon OUTPUT: request Total Output Power 15.4W per port, 125W Total Power FEATURES: Cisco Legacy Detection (Option) Ripple and Regulation No extern parts required for Legacy devices: 100mV maximum VoIP Phones: 7910,7912,7940,7960 Access Points: 350,1100,1200 2 Efficiency 75% (typical at maximum load, and 120V Over Voltage/Current, Short Circuit AC 60Hz Protection Outputs equipped with short circuit Hold-up Time protection and overload protection as per 10mS minimum 120VAC max load 802.3af specification. The output can be shorted permanently without damage Transient O/P Voltage Protection 60V maximum at switch on and off at any Over Temperature Protection AC line phase Automat shutdown without damage Turn-On Delay Time Indicators 3 sec max at max load,120VAC 60Hz, 25Hz Green LED: Power detected ON Yellow LED: Fault Detected Input Connector AC Input IEC320 3 Pin Notes: 1. The characteristics defined are at ambient temperature of 25C unless otherwise specified Revision 6/6/2019 2. Efficiency is measured after 30 minutes burn-in