WWW.PHIHONG.COM DC-DC Power over Ethernet Splitter Fully Compliant IEEE802.3af PD Power Supply Features Fully Compliant IEEE802.3af DC Gigabit Compatible Power Supply Full Protection OTP, OCP, OVP DC Good LED 1 Year Warranty Non-Vented Case Applications IP Telephones Security Cameras Wireless Network Access Points IP Print Servers Blue Tooth Access Points Safety Approvals CE Mechanical Characteristics Length: 100mm (3.94in) Height: 28mm (1.1in) Width: 56mm (2.2in) Weight: 0.2Kg (7.05oz) Output Specifications DC Output Output Current Model Voltage POE14-033-R 3.3V 2.5A POE14-050-R 5V 2.5A POE14-120-R 12V 1.17A Reference files: POE14 user manual.pdf Phihong is not responsible for any error and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 10/26/2021 1 POE14 Characteristics WWW.PHIHONG.COM INPUT: Immunity Input Voltage Range ESD: EN61000-4-2 Level 3 36 to 56V DC Receives power from either RS: EN61000-4-3 Level 2 data or spare pairs EFT: EN61000-4-4 Level 2 Surge: EN61000-4-5 Level 3 Input Current CS: EN61000-4-6 Level 2 0.6A (DC) 36 V DC at max load Voltage Dips: EN61000-4-11Harmonic: EN61000-3-2 Inrush Current Note: CS, Surge, Harmonics and Dips tested 0.4A maX with POE20U EMC OUTPUT: Complies with FCC Class B Regulation Complies with EN55032 Class B Line and Load 5% Dielectric withstand (HI-POT) Test Ripple 1500V AC for 1 minute, 10mA 12V model 120mVp-p 5V & 3.3V models 75mVp-p Insulation Resistance Primary to secondary: >10M Ohm 500V DC 2 Efficiency 72% (typical) at max load and 48V DC FEATURES: Short Circuit Protection Output Power Output can be shorted permanently without Output Model Limit damage 3.3V 8.25W at 36-57V DC 5V 12.5W at 36-57V DC Over Voltage Protection 12V 12W at 36-55V DC By Zener clamping 12V 14W at 55-57V DC Indicators ENVIRONMENTAL: Green LED Output Good Temperature Operation 0 to +40C Input and Output Data Connector Non-Operation -25 to +65C RJ45 Humidity 5 to 90% Output Connector Center Positive Barrel 9mm x 2.5mm x 5.5mm. Tip is user changeable for other sizes. Note: The + molded on replaceable tip must line up with the word tip on DC cord to ensure that the center pin DC jack is +. Notes: 1. The characteristics defined are at ambient temperature of 25C unless otherwise specified 2. Efficiency is measured after 30 minutes burn-in Revision 10/26/2021