POE15M-560 Phihong

WWW.PHIHONG.COM Single Port 15.4W Power over Ethernet Desktop POE15x-560 Passive Power Injector Features No Detection passive injector Gigabit data rates Non-Vented Case Full Protection OCP, OVP Small case size Level VI Efficient 1 Year Warranty Low Cost Applications IP Telephones Security Cameras Wireless Network Access Points Safety Approvals cUL/UL 60950 CE IEC/EN 60950-1 LPS Mechanical Characteristics Length: 106mm (4.17in) Height: 27mm (1.1in) Width: 40mm (1.57in) Weight: 100g (3.5oz.) Output Specifications DC Output Load Regulation Input Output Model Voltage Connector Power Min. Max. Line Load POE15M-560 56V 0A 0.275A C6 15.4W 5% POE15W-560 56V 0A 0.275A C8 15.4W 5% Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 12/15/2015 POE15x-560 Characteristics WWW.PHIHONG.COM INPUT: EMC AC Input Voltage Range FCC Part 15 Class B 90 to 264VAC EN55022 Class B AC Input Voltage Rating Immunity EN50082-1 100 to 240VAC ESD: EN61000-4-2. Level 3 RS: EN61000-4-3. Level 2 AC Input Current EFT: EN61000-4-4. Level 2 0.5A (RMS) maximum for 90VAC Surge: EN61000-4-5. Level 3 0.35A (RMS) maximum for 240VAC CS: EN61000-4-6. Level 2 Voltage Dips EN61000-4-11 Leakage Current Harmonic: EN61000-3-2 Class A 0.25mA maximum 254VAC 60Hz Isolation Test Primary to Secondary: 3000VAC for 1 second 10mA AC Input Frequency 47-63Hz Insulation Resistance AC Inrush Current Primary to Secondary: >10M OHM 500VDC 30A for 115VAC max load FEATURE: 60A for 230VAC max load Over Voltage Protection Voltage between 2 SELV conductors shall not exceed No Load Power Consumption 42.4Vpk or 60VDC for longer than 0.2 sec. Limit of 71 <100mW at 115Vac VPK or 120VDC shall not be exceeded latching. <75mW at 230Vac Over Current Protection OUTPUT: 400mA Total Output Power 15.4W Short Circuit Protection Continuous, no damage Ripple and Regulation 200mV max 25C, 115VAC, 60Hz & 230VAC, 50Hz Indicator Solid BLUE: Power ON Efficiency Meets Level VI requirements Data in/Output Connector RJ45 Hold-up time: E option = Earth grounded shielded Rj45 connectors 16mS minimum at maximum load and 120VAC, 60Hz Output Connection ENVIRONMENTAL: +pin 3,6 / -pins 1,2 Temperature Operation -20 to +50C Non-operation -25 to +75C Humidity 5 to 90% Dimension Diagram Unit: mm (inch)