WWW.PHIHONG.COM 8-Port 72W per Port Midspan POE576U-8UP-N for 10/100/1000 Base-T Networks Features Proprietary Detection, Disconnect and Full Power of 576W--72W per Port Overload Protection Full Protection OTP, OCP, OVP Limited Power Source SNMPv2c Management Gigabit Compatible Ultra PoE at 72W per port 1 1U Rack Mounting Kit Ships with 1 Year Warranty Unit Applications Wireless Access Points Security Systems Computer Workstations IP Cameras Safety Approvals cUL/UL CE Mechanical Characteristics Length: 438mm (17.25in) Height: 44.5 mm (1.75in) Width: 228mm (8.98in) Weight: 3.8Kg (8.5lbs) Output Specifications Load DC Output 2 Model Output Power per Port 3 Voltage Min. Max. POE576U-8UP-N-R 56V 15mA 1.29A 72W Notes: 1. Effective January 1, 2019, warranty is valid for one year from purchase date. Optional extended warranties available-please consult factory for more information 2. Model without SNMP management available upon special request 3. Max load applies to compliant load at 12.5K detection. If operating at 25K IEEE802.3at mode max load is 0.6A Reference files: 1. SNMPv2c User Manual-Rev1.7.pdf 2. Multiport Midspan Installation Manual.pdf 3. SNMPv2c Firmware-Rev1.7.zip 4. SNMPv2c MIB 10 30 2009.zip Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 3/11/2019 POE576-8UPN-R Characteristics WWW.PHIHONG.COM INPUT: ENVIRONMENTAL Input Voltage Rating Temperature 100 to 240VAC Operation 0 to +40C Non-Operation -25 to +65C Input Voltage Range Humidity 5 to 90% 90 to 264VAC EMC AC Input Current EN55022 Class A, FCC Class A with UTP 9.0A (RMS) 90VAC at maximum load cabling 4.25A (RMS) 230VAC at maximum load EN55022 Class B, FCC Class B with FTP cabling AC Input Frequency 47 to 63Hz Isolation Test Primary to Secondary: 4242VDC for 1 Leakage Current minute 3.5mA maximum at 264VAC and 60Hz Primary to Ground: 2121VDC for 1 minute Secondary to Ground: 2121VDC for 1 Max In-Rush Current: minute 30A for 115VAC at maximum load 60A for 230VAC at Maximum load Immunity EN50082-1 (Cold Start at Ambient 25C) ESD: EN61000-4-2 Level 3 RS: EN61000-4-3 Level 2 OUTPUT: EFP: EN61000-4-4 Level 2 Total Output Power Surge: EN61000-4-5 Level 3 72W per port CS: EN61000-4-6 Level 2 576W Maximum Total Power Voltage Dips: EN61000-4-11 Harmonic: EN61000-3-2 Class A Ripple and Regulation 250mV maximum IEEE802.3af/at Interoperability If 25K Ohm is detect the unit operates in Efficiency IEEE802.3at mode 33.6W 2 pair 75% (typical) at maximum load, and powering. 12.5K detection resistance 120VAC 60Hz required for full power. Hold-Up Time FEATURES: 16mS min. 120VAC and maximum load Cisco Legacy Detection No extern parts required for Legacy Transient O/P Voltage Protection Devices: 60V maximum at switch on and off at any VoIP Phones:7910, 7912, 7940, 7960 AC line Phase Access Points350, 1100, 1200 Turn-On Delay Time 20 sec maximum at maximum load, 120VAC 60Hz