POE60D-560G-R Phihong

WWW.PHIHONG.COM 60W Power over Ethernet Splitter POE60 Ultra PoE Gigabit Splitter Designed to work with POE75U-1UP Single port Features Proprietary Detection, Disconnect and Designed to Work with POE75U Overload Protection per IEEE802.3af Single Port Injector or better Gigabit Compatible Diagnostic LEDs Non-Vented Case 1 Year Warranty Applications WiMAX Access Point Computer Workstation Last Mile Wireless Multi Radio Access Points Safety Approvals CE Mechanical Characteristics Length: 100mm (3.94in) Height: 27.9mm (1.09in) Width: 56mm (2.25in) Weight: 142g (5.0oz) Output Specifications Model DC Output Voltage Output Current 50-57V POE60D-560(G)-R 52V min when used with 1.1A POE75U-1UP Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 12/11/2018 POE60D Characteristics WWW.PHIHONG.COM INPUT: Immunity Input Voltage Range ESD: EN61000-4-2. Level 3 Receives power from either data and spare RS: EN61000-4-3. Level 2 pairs. 50 to 57Vdc CS: EN61000-4-6. Level 2 Input Current EMC 1.4A (DC) max. Complies with FCC Class B Complies with EN55032 Class B OUTPUT: Regulation Isolation Test Unregulated The splitter output is non-isolated from incoming PoE voltages Power 60W for 55-57VDC input range Indicators 55W for 50VDC input range GREEN LED Output Good Efficiency Cable 98% (typical) at maximum load 53Vinput Designed to operate up to 100 meters per IEEE 802.3, CAT 5e or CAT6 Short Circuit Protection Output can be shorted permanently without Input and Output Data Connector damage RJ45 ENVIRONMENTAL: Output Connector Temperature Center Positive Barrel 9mm x 2.5mm ID x Operation 0 to +40C 5.5mm OD Non-operation -20 to +65C Tip is user changeable for other sizes Humidity 5 to 90% Dimension Diagram Unit: mm