WWW.PHIHONG.COM 60W Single Port Multi -Gig Power over Ethernet Midspan IEEE802.3bt Compliant Power Injector Features Compliant with IEEE802.3bt Standard Limited Power Source Compliant with Phihong Proprietary Single Source 4 Pair Power Current 12.5K Detection Sharing Non-Vented Case Broken Wire Detection 4 Pair Powering +3,6,4,5 / - 1,2,7,8 Gigabit Compatible Full Protection OVP, OCP 1 Year Warranty Applications IP Telephones Security Cameras Wireless Access Points IP Print Servers Bluetooth Access Points WiMAX Access Points Safety Approvals UL/cUL 60950-1 IEC60950-1 UL/cUL 62368-1 IEC62368-1 CE Mechanical Characteristics Length: 163.25mm (6.43in.) Height: 36mm (1.42in.) Width: 65mm (2.56in.) Weight: 500g (17.64oz) Output Specifications 1 AC Data DC Output Load Regulation Model 2 Input Speed Voltage Min. Max. Line Load +56VDC +1V/-3V POE60U-1BTE-R 3 Wire C14 1G 56V 10mA 1.07A (57-53VDC) +56VDC +1V/-3V 3 POE60U-1BT6-R 3 Wire C14 1G 56V 10mA 1.07A (57-53VDC) +56VDC +1V/-3V POE60U-1BT-2-R 3 Wire C14 2.5G 56V 10mA 1.07A (57-53VDC) +56VDC +1V/-3V POE60U-1BT-5-R 3 Wire C14 5G 56V 10mA 1.07A (57-53VDC) +56VDC +1V/-3V POE60U-1BT-X-R 3 Wire C14 10G 56V 10mA 1.07A (57-53VDC) Notes: 1. Voltage measured within 2 of the output RJ45 connector on data pairs 3,6(+) and 1,2(-) 2. Combined output on data pairs and spare pairs. Otherwise 535mA on data pairs 3,6(+) 1, 2(-) and spare pairs 4,5(+) 7,8(-) 3. No shielded RJ45 connector Phihong is not responsible for any error and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 11/29/2021 1 POE60U-1BT Characteristics WWW.PHIHONG.COM INPUT: Isolation Test AC Input Voltage Range Primary to Secondary: 4242VDC for 1min 90VAC to 264VAC 10mA Primary to Field Ground: 2121VDC for 1min, AC Input Voltage Rating 10mA 100 to 240VAC Immunity AC Input Current ESD: IEC61000-4-2. Level 3 2.0A (RMS) max for 90VAC RS: IEC61000-4-3. Level 3 1.2A (RMS) max for 240VAC EFT: IEC61000-4-4. Level 2 Surge: IEC61000-4-5. Level 4 Leakage Current CS: IEC61000-4-6. Level 2 3.5mA max 264VAC/50Hz Voltage Dips IEC61000-4-11 Harmonic: IEC61000-3-2 Class A AC Inrush Current 40A (RMS) max for 115VAC Insulation Resistance 80A (RMS) max for 230VAC Primary to Secondary: >10M OHM 500VDC Primary to Field Ground: >10M OHM OUTPUT: 500VDC Total Output Power 60W 40C FEATURES: 30W 50C Over Current Protection Output 1(OUT) <650mA Output Ripple Output 2(OUT) <650mA 100mV max 25C, 100-240VAC Output 1 and 2 Combined(OUT) <1300mA 2 Efficiency Over Voltage Protection DOE Level VI Meets UL requirements Hold-up Time Short Circuit Protection 10mS min. 120VAC/60Hz max load Output can be shorted permanently without damage ENVIRONMENTAL: Temperature LED Indicators Operation -10C to +40C for 60W No LED - Power failure >40C to +50C for 30W Amber LED short/slow Blinking - POE power Non-operation -20C to +65C ready Humidity 5 to 90% but no connection Green LED solid - POE output power good EMC Amber/Green LED alternate blinking - Complies with FCC Class B POE detection failure Complies with EN55032 Class B Amber LED long/fast blinking - POE output over power or short Green LED Blink Invalid load condition Notes: 1. The characteristics defined are at ambient temperature of 25C unless otherwise specified 2. Efficiency is measured after 30 minutes burn-in Revision 11/29/2021