WWW.PHIHONG.COM
19.6W Single Port Power over Ethernet Midspan
IEEE802.3af Compliant Power Injector
Features
Compliant with IEEE802.3af Standard Limited Power Source
Non-vented Case Gigabit Compatible
Full Protection OVP, OCP 1 Year Warranty
Applications
IP Telephones Security Cameras
Wireless Access Points IP Print Servers
Bluetooth Access Points WiMAX Access Points
Safety Approvals
CE cUL/US
Mechanical Characteristics
Length: 140mm (5.51in.) Height: 36mm (1.42in.)
Width: 65mm (2.55in.) Weight: 0.2Kg (7.58oz)
Output Specifications
DC Output Load Regulation
Model AC Input
Voltage
Min. Max. Line Load
POE21U-1AF Three Wire 56V 10mA 350mA 5%
POE21W-1AF Two Wire 56V 10mA 350mA 5%
Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at
www.phihong.com for the most up-to-date specifications and contact information.
Revision 11/16/2011 POE21X-1AF Characteristics WWW.PHIHONG.COM
INPUT:
EMI
AC Input Voltage Rating
EN55022 Class B
100 to 240VAC
FCC part 15 Class B
AC Input Voltage Range
EMC
90 to 264VAC
ESD: IEC61000-4-2 Level 3
RS: IEC61000-4-3 Level 3
AC Input Current EFT/Burst: IEC61000-4-4 Level 2
0.8A (RMS) maximum at 120VAC Surge: IEC61000-4-5 Level 3
0.55A (RMS) maximum at 240VAC CS: IEC61000-4-6 Level3
Voltage Dips: IEC61000-4-11
Harmonic: IEC61000-3-2 Class A
AC Input Frequency
47 to 63Hz
Isolation (HI-POT)
Primary to secondary: 1500VAC for 1 minute, 10mA
Leakage Current
U Model 350uA maximum
W Model 250uA maximum Insulation Resistance
Primary to secondary: 10M Ohm 500VDC
Max In-rush Current
60A maximum at 240VAC and maximum load FEATURES:
(Cold Start at ambient 25C)
Cisco
No extern parts required for Legacy devices:
OUTPUT: VoIP Phones: 7910, 7912, 7940, 7960
Access Points: 1040, 1140, 1250, 1260, 3500
Output Power
19.6W
Over Voltage/Current, Short Circuit Protection
Hold up Time The output is equipped with short-circuit protection and
10mSec minimum at maximum load at 120VAC, 60Hz overload protection as per the IEEE 802.3af specification
and conforms to UL60950-2. The output can be shorted
permanently without damage.
Transient O/P Voltage Protection
60V maximum at switch on/off at any AC line phase
Indicator (Status)
Solid Green: Valid IEEE802.3af load detected and
Efficiency
connected ON
80% Typical at maximum load at 120VAC, 60Hz
Blinking Green: Power ON ready for connection
Blinking Red/Green: Invalid load connected
Environment
Blinking Red: fault
Operating Temperature 0 to +40C
Non-operating Temperature -20 to +65C
AC Input Connector
U models - IEC320 inlet 3-pin C14
Relative Humidity 5 to 90%
W models IEC320 inlet 2-pin C8
Dimension Diagram Unit: mm
Output Connection
+pins 3,6 / -pins 1,2
Data IN/POE OUT Connector
RJ45
Warranty
1 Year
Revision 11/16/2011